DD500/S – DD506/S WTE POWER SEMICONDUCTORS 50A 8.4mm/9.5mm DISH DIODE Features ! Glass Passivated Die Construction ! ! ! ! ! Low Leakage Low Cost High Surge Current Capability Low Forward C-Band Terminal Construction C D Mechanical Data B ! ! ! ! ! Case: All Copper Case and Components Hermetically Sealed Terminals: Contact Areas Readily Solderable Polarity: Cathode to Case(Reverse Units Are Available Upon Request and Are Designated By An “R” Suffix, i.e. DD502R or DD504SR) Polarity: Red Color Equals Standard, Black Color Equals Reverse Polarity Mounting Position: Any A Dim A B C D 8.4mm Dish 9.5mm Dish Min Max Min Max 8.35 8.45 9.50 9.72 2.0 2.16 2.0 2.16 1.43 1.47 1.43 1.47 22.3 — 22.3 — All Dimensions in mm “S” Suffix Designates 8.4mm Dish No Suffix Designates 9.5mm Dish Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA = 150°C DD500/ DD501/ DD502/ DD503/ DD504/ DD505/ DD506/ S S S S S S S Unit VRRM VRWM VR 50 100 200 300 400 500 600 V VR(RMS) 35 70 140 210 280 350 420 V IO 50 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 500 A Forward Voltage @IF = 50A VFM 1.1 V Peak Reverse Current At Rated DC Blocking Voltage @TA = 25°C @TA = 100°C IRM 100 500 µA Cj 300 pF RJC 0.6 K/W TJ, TSTG -65 to +175 °C Typical Junction Capacitance (Note 1) Typical Thermal Resistance Junction to Case (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled. DD500/S – DD506/S 1 of 2 © 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity DD500 Press Fit 200 Units/Tray DD500S Press Fit 200 Units/Tray DD501 Press Fit 200 Units/Tray DD501S Press Fit 200 Units/Tray DD502 Press Fit 200 Units/Tray DD502S Press Fit 200 Units/Tray DD503 Press Fit 200 Units/Tray DD503S Press Fit 200 Units/Tray DD504 Press Fit 200 Units/Tray DD504S Press Fit 200 Units/Tray DD505 Press Fit 200 Units/Tray DD505S Press Fit 200 Units/Tray DD506 Press Fit 200 Units/Tray DD506S Press Fit 200 Units/Tray Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com DD500/S – DD506/S We power your everyday. 2 of 2 © 2002 Won-Top Electronics