EPCOS B72210S0271K551 Leaded varistors taping Datasheet

Leaded Varistors
Taping
Taping (leaded varistors)
All leaded varistors are available on tape.
Exception: S10K510 … K680, S14K510 … K1000, S20K385 … K1000.
Tape packaging for lead spacing
= 5 fully conforms to IEC 60286-2, while for lead spacings
= 7,5 and 10 the taping mode is based on this standard.
The ordering tables on page 213 ff list disk types available on tape in detail, i. e. with complete type
designation and ordering code. Taping mode and, if relevant, crimp style and lead spacing are coded in the type designation. For types not listed please contact EPCOS. Upon request parts with lead
spacing
= 5 mm are available in Ammopack too.
Designation system for taping mode
Type designation
bulk
default = no extra
designation
Taped, reel type
G
G2
G3
G4
G5
see page 208
Taped, Ammopack
GA
G2A
Crimp style
(if relevant)
S
S2
S3
S4
S5
Lead spacing
(if relevant)
R5
R7
see page 212
Lead spacing
differs from
standard
version
see page 209
Example SIOV-S10K250GS3R5
SIOV-S10K250
G
S3
R5
Taped
Reel type I
Seating plane height
H0 =16
Crimp style 3
Lead spacing 5,0
(differs from LS 7,5
of standard version
S10K250)
G2A
S2
—
Taped
Seating plane height
H0 =18
Ammopack
Crimp style 2
—
Example SIOV-S07K60G2AS2
SIOV-S07K60
206 04/02
Leaded Varistors
Taping
Taping modes/reel types
Taped varistors have the letter “G” appended to the type designation.
The different tapes and matching reel types are identified by numbers as shown in the table on
page 208.
Types with lead spacing
= 5, reel diameter 360 mm, have the code letter “G” while types with
lead spacing
= 7,5 and 10 on 500-mm reels are identified by “G5”.
Furthermore types with lead spacing
= 5 are available in Ammopack, code letters “GA”.
Versions G2, G3 and G4 are special tapes on 360-mm reels resp. Ammopack: G2 denotes the seating plane height H0 = 18 for crimped versions. Tapes G3 and G4 are available on 360-mm reels in
case the 500-mm reels are too big for your insertion machine.
Crimp styles
Both crimped and straight leads are standard for taped disk varistors. The leads are differently
crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers
(S, S2 … S5) as shown in the dimensional drawings on page 212.
The crimp styles of the individual types can be seen from the type designation in the ordering tables.
Example straight leads:
Example crimped leads:
S10K250G5
S10K250G5S5
Lead spacing
Type series SIOV-S10 is available with two different lead spacings:
= 5,0 (wire Æ 0,6 mm)
= 7,5 (wire Æ 0,8 mm)
For taped varistors having a different lead spacing from their untaped equivalents, the actual
appended to type designation.
Example: S10K250GS3R5
The standard lead spacing of series SIOV-S10 is
appendix “R5”.
= 7,5. The version with
207 04/02
is
= 5,0 has the
Leaded Varistors
Taping
Assignment of taping mode to reel type
Taping mode
Reel type
G1)
G2
G3
G4
G5
GA
G2A
I
I
II
II
III
Ammopack
Ammopack
Seating plane height H0
for crimped types
mm
16
18
16
18
16
16
18
Seating plane height H
for uncrimped types
mm
18
—
18
—
18
18
—
Taping modes G2, G3, G4, GA and G2A: delivery upon request.
Direction of unreeling
Reel
Tape
Reel dimensions (in mm)
Reel type
d
f
n
w
I
II
III
360 max.
360 max.
500 max.
31 ± 1
31 ± 1
23 ± 1
approx. 45
approx. 55
approx. 59
54 max.
64 max.
72 max.
If reel type III is not compatible with insertion equipment because of its large diameter, type series
S10 and S14 can be supplied on reel II upon request (taping mode G3).
1) “1” is omitted.
208 04/02
Leaded Varistors
Taping
Ammopack dimensions
Bamboo sticks,
Cardboard folding
carton
340 × 226 × 55 mm
226
55
340
Paper adhesive tape,
width 50 mm
Label
Paper adhesive tape,
width 50 mm
VAR0402-G
209 04/02
Leaded Varistors
Taping
Taping in accordance with IEC 60286-2
s
∆h
∆h
∆p
b
∆p
D0
H1
H
W
W1
B
W0
A
H0
L
W2
H1
F
d
P0
P1
Direction of unreeling
t
Section A-B
<
F = e = 5,0 mm (except S ... R5)
VAR0410-X
Taping based on IEC 60286-2
s
∆h
∆p
b
∆p
H1
H
H0
W1
W2
H1
F
D0
B
W0
A
d
Section A-B
P1
t
P0
W
L
∆h
Direction of unreeling
< <
F = e = 7,5 mm (including S ... R5)
F = e = 10 mm (including S ... R5)
VAR0395-J
210 04/02
Leaded Varistors
Taping
Tape dimensions (in mm)
Sym= 5,0
bol
b
s
d
0,61)
P0
12,7
Tolerance
max.
max.
± 0,05
± 0,3
0,8
12,7 2)
P1
F
Dh
Dp
3,85
5,0
0
0
± 0,7
+ 0,6/– 0,1
± 2,0
± 1,3
8,95
± 0,8
7,5
± 0,8
depends on s
0
± 2,0
W
W0
18,0
5,5
± 0,5
min.
18,0
11,0
± 0,5
min.
18,0
11,0
± 0,5
min.
W1
W2
H
H0
9,0
3,0
18,0
16,0
(18,0)
32,2
4,0
0,9
11,0
4,0
± 0,5
max.
+ 2,0/– 0
± 0,5
9,0
3,0
18,0
16,0
(18,0)
45,0
4,0
0,9
11,0
+ 0,75/– 0,5
max.
+ 2,0/– 0
± 0,5
9,0
3,0
18,0
16,0
+ 0,75/– 0,5
max.
+ 2,0/– 0
± 0,5
max.
± 0,2
max.
max.
45,0
4,0
0,9
11,0
max.
± 0,2
max.
max.
H1
D0
t
L
l
1)
2)
3)
4)
max.
± 0,2
max.
max.
max.
= 7,5 Tolerance
max.
max.
± 0,05
± 0,3
= 10,0 Tolerance
1,0
12,7
max.
max.
± 0,05
± 0,3
7,7
± 0,8
10,0
± 0,8
depends on s
0
± 2,0
SHCV 0,5
Taping with P0 = 15,0 mm upon request
Applies only to uncrimped types
Applies only to crimped types (H0 = 18 upon request)
211 04/02
Remarks
see tables
on page 169 ff
± 1 mm/20
sprocket holes
measured at
top of component body
Peel-off
force ³ 5 N
3)
4)
without lead
Leaded Varistors
Taping
Standard crimp styles
Crimp style S2)
b
Crimp style S2
Crimp style S3
b
b
s
s
h
h
h
s
1)
1)
1)
e
ød
ød
e
a
ød
e
VAR0411-F
60717
Seating plane according to IECVAR0403-O
VAR0411-F
VAR0396-R
to IEC
1) Seating plane according
1) Seating plane according to IEC 60717
Crimp style S4
s
h
b
1)
e
ød
1) Seating plane according to IEC 60717
VAR0404-W
Crimp style S5
s
h
b
1)
ød
Type
SIOVS05K11 … 175(E2)S2
S05K210 … 460(E2)S3
mm
5,0
5,0
hmax
mm
10,0
10,0
S07K11 … 175(E2)S2
S07K210 … 460(E2)S3
5,0
5,0
12,0
12,0
S10K11 … 300(E2)S5
S10K320 … 460(E2)(S3)(S5)
S10K510(E2)(S3)(S5)
S10 … AUTOS5
S10 … AUTOD1S5
S10K11 … 175(E2)S4R5
S10K210 … 460(E2)S3R5
7,5
7,5
7,5
7,5
7,5
5,0
5,0
15,5
16,5
17,5
17,0
16,0
16,5
16,5
S14K11 … 300(E2)S5
S14K320 … 460(E2)(S3)(S5)
S14K510(E2)(S3)(S5)
S14 … AUTOS5
S14 … AUTOD1S5
7,5
7,5
7,5
7,5
7,5
20,0
20,0
21,5
21,0
20,0
10,0
10,0
27,0
27,5
a
S20K11 … 320(E2)(E3)S5
S20K385 … 510(E2)S5
e
1) Seating plane according to IEC 60717
VAR0412-N
Missing dimensions are shown on page 169 ff.
2) “1” is omitted.
212 04/02
Leaded Varistors
Taping
Type
Ordering code
Crimp style
Pieces/reel I
Type series SIOV-S05, straight leads
= 5,0
SIOV-S05K11G
B72205S0110K111
SIOV-S05K14G
B72205S0140K111
SIOV-S05K17G
B72205S0170K111
SIOV-S05K20G
B72205S0200K111
SIOV-S05K25G
B72205S0250K111
SIOV-S05K30G
B72205S0300K111
SIOV-S05K35G
B72205S0350K111
SIOV-S05K40G
B72205S0400K111
SIOV-S05K50G
B72205S0500K111
SIOV-S05K60G
B72205S0600K111
SIOV-S05K75G
B72205S0750K111
SIOV-S05K95G
B72205S0950K111
SIOV-S05K115G
B72205S0111K111
SIOV-S05K130G
B72205S0131K111
SIOV-S05K140G
B72205S0141K111
SIOV-S05K150G
B72205S0151K111
SIOV-S05K175G
B72205S0171K111
SIOV-S05K230G
B72205S0231K111
SIOV-S05K250G
B72205S0251K111
SIOV-S05K275G
B72205S0271K111
SIOV-S05K300G
B72205S0301K111
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1000
Type series SIOV-S05, crimped leads
= 5,0
SIOV-S05K11GS2
B72205S0110K211
SIOV-S05K14GS2
B72205S0140K211
SIOV-S05K17GS2
B72205S0170K211
SIOV-S05K20GS2
B72205S0200K211
SIOV-S05K25GS2
B72205S0250K211
SIOV-S05K30GS2
B72205S0300K211
SIOV-S05K35GS2
B72205S0350K211
SIOV-S05K40GS2
B72205S0400K211
SIOV-S05K50GS2
B72205S0500K211
SIOV-S05K60GS2
B72205S0600K211
SIOV-S05K75GS2
B72205S0750K211
SIOV-S05K95GS2
B72205S0950K211
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
213 04/02
Leaded Varistors
Taping
Type
Ordering code
Crimp style
Pieces/reel I
Type series SIOV-S05, crimped leads
= 5,0 (continued)
SIOV-S05K115GS2
B72205S0111K211
S2
SIOV-S05K130GS2
B72205S0131K211
S2
SIOV-S05K140GS2
B72205S0141K211
S2
SIOV-S05K150GS2
B72205S0151K211
S2
SIOV-S05K175GS2
B72205S0171K211
S2
SIOV-S05K230GS3
B72205S0231K311
S3
SIOV-S05K250GS3
B72205S0251K311
S3
SIOV-S05K275GS3
B72205S0271K311
S3
SIOV-S05K300GS3
B72205S0301K311
S3
SIOV-S05K385GS3
B72205S0381K311
S3
SIOV-S05K420GS3
B72205S0421K311
S3
SIOV-S05K440GS3
B72205S0441K311
S3
SIOV-S05K460GS3
B72205S0461K311
S3
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
1000
1000
1000
Type series SIOV-S07, straight leads
= 5,0
SIOV-S07K11G
B72207S0110K111
SIOV-S07K14G
B72207S0140K111
SIOV-S07K17G
B72207S0170K111
SIOV-S07K20G
B72207S0200K111
SIOV-S07K25G
B72207S0250K111
SIOV-S07K30G
B72207S0300K111
SIOV-S07K35G
B72207S0350K111
SIOV-S07K40G
B72207S0400K111
SIOV-S07K50G
B72207S0500K111
SIOV-S07K60G
B72207S0600K111
SIOV-S07K75G
B72207S0750K111
SIOV-S07K95G
B72207S0950K111
SIOV-S07K115G
B72207S0111K111
SIOV-S07K130G
B72207S0131K111
SIOV-S07K140G
B72207S0141K111
SIOV-S07K150G
B72207S0151K111
SIOV-S07K175G
B72207S0171K111
SIOV-S07K230G
B72207S0231K111
SIOV-S07K250G
B72207S0251K111
SIOV-S07K275G
B72207S0271K111
SIOV-S07K300G
B72207S0301K111
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
214 04/02
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Leaded Varistors
Taping
Type
Ordering code
Type series SIOV-S07, crimped leads
= 5,0
SIOV-S07K11GS2
B72207S0110K211
SIOV-S07K14GS2
B72207S0140K211
SIOV-S07K17GS2
B72207S0170K211
SIOV-S07K20GS2
B72207S0200K211
SIOV-S07K25GS2
B72207S0250K211
SIOV-S07K30GS2
B72207S0300K211
SIOV-S07K35GS2
B72207S0350K211
SIOV-S07K40GS2
B72207S0400K211
SIOV-S07K50GS2
B72207S0500K211
SIOV-S07K60GS2
B72207S0600K211
SIOV-S07S60AGS2
B72207S0600S212
SIOVS007K75GS2
B72207S0750K211
SIOVS007K95GS2
B72207S0950K211
SIOVS007S95AGS2
B72207S0950S212
SIOV-S07K115GS2
B72207S0111K211
SIOV-S07K130GS2
B72207S0131K211
SIOV-S07K140GS2
B72207S0141K211
SIOV-S07K150GS2
B72207S0151K211
SIOV-S07K175GS2
B72207S0171K211
SIOV-S07K230GS3
B72207S0231K311
SIOV-S07K250GS3
B72207S0251K311
SIOV-S07K275GS3
B72207S0271K311
SIOV-S07K300GS3
B72207S0301K311
SIOV-S07K385GS3
B72207S0381K311
SIOV-S07K420GS3
B72207S0421K311
SIOV-S07K440GS3
B72207S0441K311
SIOV-S07K460GS3
B72207S0461K311
215 04/02
Crimp style
Pieces/reel I
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S2
S3
S3
S3
S3
S3
S3
S3
S3
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
1000
1000
1000
1000
1000
1000
Leaded Varistors
Taping
Type
Ordering code
Crimp style
Pieces/reel III
Type series SIOV-S10, straight leads
= 7,5
SIOV-S10K11G5
B72210S0110K151
SIOV-S10K14G5
B72210S0140K151
SIOV-S10K17G5
B72210S0170K151
SIOV-S10K20G5
B72210S0200K151
SIOV-S10K25G5
B72210S0250K151
SIOV-S10K30G5
B72210S0300K151
SIOV-S10K35G5
B72210S0350K151
SIOV-S10K40G5
B72210S0400K151
SIOV-S10K50G5
B72210S0500K151
SIOV-S10K60G5
B72210S0600K151
SIOV-S10K75G5
B72210S0750K151
SIOV-S10K95G5
B72210S0950K151
SIOV-S10K115G5
B72210S0111K151
SIOV-S10K130G5
B72210S0131K151
SIOV-S10K140G5
B72210S0141K151
SIOV-S10K150G5
B72210S0151K151
SIOV-S10K175G5
B72210S0171K151
SIOV-S10K230G5
B72210S0231K151
SIOV-S10K250G5
B72210S0251K151
SIOV-S10K275G5
B72210S0271K151
SIOV-S10K300G5
B72210S0301K151
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
1000
1000
Type
Crimp style
Pieces/reel I
S4
S4
S4
S4
S4
S4
S4
S4
S4
S4
S4
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
Ordering code
Type series SIOV-S10, crimped leads
= 5,0
SIOV-S10K11GS4R5
B72210S0110K412
SIOV-S10K14GS4R5
B72210S0140K412
SIOV-S10K17GS4R5
B72210S0170K412
SIOV-S10K20GS4R5
B72210S0200K412
SIOV-S10K25GS4R5
B72210S0250K412
SIOV-S10K30GS4R5
B72210S0300K412
SIOV-S10K35GS4R5
B72210S0350K412
SIOV-S10K40GS4R5
B72210S0400K412
SIOV-S10K50GS4R5
B72210S0500K412
SIOV-S10K75GS4R5
B72210S0750K412
SIOV-S10K95GS4R5
B72210S0950K412
216 04/02
Leaded Varistors
Taping
Type
Ordering code
Crimp style
Pieces/reel I
Type series SIOV-S10, crimped leads
= 5,0 (continued)
SIOV-S10K115GS4R5
B72210S0111K412
S4
SIOV-S10K130GS4R5
B72210S0131K412
S4
SIOV-S10K140GS4R5
B72210S0141K412
S4
SIOV-S10K150GS4R5
B72210S0151K412
S4
SIOV-S10K175GS4R5
B72210S0171K412
S4
SIOV-S10K230GS3R5
B72210S0231K312
S3
SIOV-S10K250GS3R5
B72210S0251K312
S3
SIOV-S10K275GS3R5
B72210S0271K312
S3
SIOV-S10K300GS3R5
B72210S0301K312
S3
1500
1500
1500
1500
1500
1500
1500
1000
1000
Type
Crimp style
Pieces/reel III
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
1000
1000
Ordering code
Type series SIOV-S10, crimped leads
= 7,5
SIOV-S10K11G5S5
B72210S0110K551
SIOV-S10K14G5S5
B72210S0140K551
SIOV-S10K17G5S5
B72210S0170K551
SIOV-S10K20G5S5
B72210S0200K551
SIOV-S10K25G5S5
B72210S0250K551
SIOV-S10K30G5S5
B72210S0300K551
SIOV-S10K35G5S5
B72210S0350K551
SIOV-S10K40G5S5
B72210S0400K551
SIOV-S10K50G5S5
B72210S0500K551
SIOV-S10K60G5S5
B72210S0600K551
SIOV-S10K75G5S5
B72210S0750K551
SIOV-S10K95G5S5
B72210S0950K551
SIOV-S10K115G5S5
B72210S0111K551
SIOV-S10K130G5S5
B72210S0131K551
SIOV-S10K140G5S5
B72210S0141K551
SIOV-S10K150G5S5
B72210S0151K551
SIOV-S10K175G5S5
B72210S0171K551
SIOV-S10K230G5S5
B72210S0231K551
SIOV-S10K250G5S5
B72210S0251K551
SIOV-S10K275G5S5
B72210S0271K551
SIOV-S10K300G5S5
B72210S0301K551
SIOV-S10K320 … 460G.S. upon request
217 04/02
Leaded Varistors
Taping
Type
Ordering code
Crimp style
Pieces/reel III
Type series SIOV-S14, straight leads
= 7,5
SIOV-S14K11G5
B72214S0110K151
SIOV-S14K14G5
B72214S0140K151
SIOV-S14K17G5
B72214S0170K151
SIOV-S14K20G5
B72214S0200K151
SIOV-S14K25G5
B72214S0250K151
SIOV-S14K30G5
B72214S0300K151
SIOV-S14K35G5
B72214S0350K151
SIOV-S14K40G5
B72214S0400K151
SIOV-S14K50G5
B72214S0500K151
SIOV-S14K60G5
B72214S0600K151
SIOV-S14K75G5
B72214S0750K151
SIOV-S14K95G5
B72214S0950K151
SIOV-S14K115G5
B72214S0111K151
SIOV-S14K130G5
B72214S0131K151
SIOV-S14K140G5
B72214S0141K151
SIOV-S14K150G5
B72214S0151K151
SIOV-S14K175G5
B72214S0171K151
SIOV-S14K230G5
B72214S0231K151
SIOV-S14K250G5
B72214S0251K151
SIOV-S14K275G5
B72214S0271K151
SIOV-S14K300G5
B72214S0301K151
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1000
1000
1000
1000
Type series SIOV-S14, crimped leads
= 7,5
SIOV-S14K11G5S5
B72214S0110K551
SIOV-S14K14G5S5
B72214S0140K551
SIOV-S14K17G5S5
B72214S0170K551
SIOV-S14K20G5S5
B72214S0200K551
SIOV-S14K25G5S5
B72214S0250K551
SIOV-S14K30G5S5
B72214S0300K551
SIOV-S14K35G5S5
B72214S0350K551
SIOV-S14K40G5S5
B72214S0400K551
SIOV-S14K50G5S5
B72214S0500K551
SIOV-S14K60G5S5
B72214S0600K551
SIOV-S14K75G5S5
B72214S0750K551
SIOV-S14K95G5S5
B72214S0950K551
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
S5
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
218 04/02
Leaded Varistors
Taping / Lock-In Crimps
Lock-in crimps
Type
Ordering code
Crimp style
Pieces/reel III
Type series SIOV-S14, crimped leads
= 7,5 (continued)
SIOV-S14K115G5S5
B72214S0111K551
S5
SIOV-S14K130G5S5
B72214S0131K551
S5
SIOV-S14K140G5S5
B72214S0141K551
S5
SIOV-S14K150G5S5
B72214S0151K551
S5
SIOV-S14K175G5S5
B72214S0171K551
S5
SIOV-S14K230G5S5
B72214S0231K551
S5
SIOV-S14K250G5S5
B72214S0251K551
S5
SIOV-S14K275G5S5
B72214S0271K551
S5
SIOV-S14K300G5S5
B72214S0301K551
S5
1500
1500
1500
1500
1500
1000
1000
1000
1000
SIOV-S14K320 … 460G.(S.) upon request
SIOV-S20K11 … 320G.(S.) upon request
SIOV-S..K … E2G.(S.)
SIOV-S20K … E3G.(S.)
SIOV-Q14K … G.(S.)
SIOV-Q20K … G.(S.)
taping according
to the versions
of the standard program
upon request
Lock-in crimps
These crimp styles provide automatic lock-in function on the printed circuit board, for facilitated assembly.
Crimp style S9 (for lead spacing
= 5):
ø1,0±0,02
1)
a*)
3,1±0,5
Layout recommendation
e
1) Seating plane in according to IEC 60717
VAR0413-V
5,0 ±0,2 mm
*)*) Set-off
Versatz“a”"a"depending
abhänglgon voltage ratings
von der Spannungsklasse
VAR0421-M
Recommended PCB thickness: 1,5 + 0,2 mm
Example: SIOV-S07K275S9
219 04/02
Leaded Varistors
Taping / Lock-In Crimps / Trimmed Leads
Trimmed leads
Crimp style S11 (for lead spacing
= 7,5):
Layout recommendation
1)
e
7,5 nom.
1) Seating plane according to IEC 60717
VAR0414-D
VAR0429-Y
Recommended PCB thickness: 1,6 +/– 0,14 mm
Copper
_0
1,20 +0,10
1,35±0,05
0,4±0,15
1,60±0,14
1,50±0,10
VAR0549-S
Recommended hole pattern
Example: SIOV-S14K275S11
Trimmed leads
Varistors with cut leads available upon request.
Lead length tolerances:
Straight leads
Crimped leads
Min. lead length
Examples:
+/– 1,0 mm
+/– 0,8 mm
+/– 3,5 mm
SIOV-S07K275M4,5:
straight leads, lead length 4,5 ± 1,0 mm
SIOV-S14K275S5M4,5: crimpstyle 5, lead length 4,5 ± 0,8 mm
220 04/02
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages