IQD CFPT-9006 Tcxo specification Datasheet

TCXO Specification
CFPT-9006
ISSUE 13; April 2016
Description
Sub 1ppm performance TCXO, a single chip oscillator and
analogue compensation circuit operating over an extended
temperature range. Its ability to function down to a supply
voltage of 2.4V and low power consumption make it
particularly suitable for mobile applications.
-1A No ref voltage, ageing adj option
1 = Optional reference voltage output on pad 1, suitable for
potentiometer supply or DAC reference: No output (standard
option)
A = Ageing Adjustment:
>±5ppm, frequency <20MHz
>±7ppm, frequency >20MHz
-1B No ref voltage, no freq adj option
1 = Optional reference voltage output on pad 1, suitable for
potentiometer supply or DAC reference: No output (standard
option)
B = No frequency adjustment initial calibration @ 25°C <
±1.0ppm
-2A Ref voltage = 2.2V, ageing adj option
2 = Reference voltage output on pad 1, for Min. VS>2.4V,
suitable for potentiometer supply or DAC reference: 2.2V
Note: Maximum load current (mA) = Vref/10
A = Ageing Adjustment:
>±5ppm, frequency <20MHz
>±7ppm, frequency >20MHz
-3A Ref voltage = 2.7V, ageing adj option
3 = Reference voltage output on pad 1, for Min. VS>3.0V,
suitable for potentiometer supply or DAC reference: 2.7V
Note: Maximum load current (mA) = Vref/10
A = Ageing Adjustment:
>±5ppm, frequency <20MHz
>±7ppm, frequency >20MHz
Outline (mm) -1A = No ref voltage, ageing adj
option
Frequency Parameters
1.25MHz to 40.0MHz
Frequency
±1.00ppm
Frequency Tolerance
Tolerance Condition
@ 25°C
±0.30ppm to ±2.50ppm
Frequency Stability
Ageing:
±1ppm max in 1st year, frequency ≤20MHz
±3ppm max for 10 years (including the 1st year), frequency
≤20MHz
±2ppm max in 1st year, frequency >20MHz
±5ppm max for 10 years (including the 1st year), frequency
>20MHz
Supply Voltage Variation (±10% change): ±0.2ppm typ
Load Variation (±5pF change): ±0.2ppm typ
After Reflow (measured at least 60mins after reflow): ±1ppm
max
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:58 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 1 of 4
TCXO Specification
CFPT-9006
Electrical Parameters
3.3V ±10%
Supply Voltage
Supply Current:
1+Frequency(MHz)*Supply(V)*{Load(pF)+15}*10–3 mA
e.g. 20MHz, 3.3V, 15pF ≈ 2mA
Optional reference voltage output on pad 1, suitable for
potentiometer supply or DAC reference:
1. No output (standard option)
2. 2.2V for min Vs>2.4V
3. 2.7V for min Vs>3.0V
Maximum load current (mA) = Vref/10
For manual frequency adjustment connect an external 50kΩ
potentiometer between pad 1 (Reference Voltage) and pad 4
(GND) with wiper connected to pad 10 (Voltage Control).
Please specify reference voltage as part of the ordering code.
Note: Supply Voltages in the range 2.4V to 6.0V are available,
please contact an IQD Sales Office
Frequency Adjustment
Slope: Positive
Standard Voltage Control Ranges:
Without Reference Voltage Vs=3.3V 1.65V±1.0V
With Reference Voltage Vs=0V to Vref
Linearity: 1% max
Input Impedance: 100kΩ min
Modulation Bandwidth: 2kHz min
A. Pulling:≥±5ppm, frequency ≤20MHz
≥±7ppm, frequency >20MHz
B. No frequency adjustment initial calibration @ 25°C ≤
±1.0ppm
C. High Pulling ±10ppm to ±50ppm can be available
depending on frequency and stability options (please contact
an IQD Sales Office)
Operating Temperature Ranges
0 to 50°C
-20 to 70°C
0 to 70°C
-30 to 75°C
-40 to 85°C
Output Details
Output Compatability
Drive Capability
HCMOS
15pF
Output Control
Tri-state Operation:
Logic ‘1’ (>60% Vs) or no connection to pad 8 enables output
Logic ‘0’ (<20% Vs) to pad 8 disables output
When at logic ‘0’ the output stage is disabled for all output
options, but the oscillator and compensation circuit are still
active (current consumption <1mA)
Output Levels
VoL: <10% Vs
VoH: >90% Vs
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:58 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 2 of 4
TCXO Specification
CFPT-9006
Noise Parameters
Phase Noise (typical for 13.0MHz @ 25°C):
-65dBc/Hz @ 1Hz
-95dBc/Hz @ 10Hz
-120dBc/Hz @ 100Hz
-135dBc/Hz @ 1kHz
-140dBc/Hz @ 10kHz
-145dBc/Hz @ 100kHz
Environmental Parameters
Shock: IEC 60068-2-27, Test Ea: 1500G acceleration for
0.5ms, half sine pulse, 3 shocks in each of 3 mutually
perpendicular planes
Vibration: IEC 60068-2-6, Test Fc: 10Hz-60Hz, 1.5mm
displacement, 60-2000Hz at 10G, 30mins in 3 mutually
perpendicular planes at 1oct/min
Solderability: MIL-STD-202, Method 208, Category 3
Storage Temperature Range: –55 to 125°C
Manufacturing Details
Pb-free Reflow Soldering: 260°C max for 30sec max
Ordering Information
Frequency*
Model*
Reference Voltage + Frequency Adjustment Options*
Output*
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
10.0MHz CFPT-9006-1A
HCMOS ±1.0ppm -20 to 70C 3.3V
Note: Certain frequency stability / temperature range
combinations may not be available for all frequencies.
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
1
Packaging Details
Pack Style: Reel
Pack Size: 1,000
Tape & reel in accordance with EIA-481-D
Pack Style: Bulk
Pack Size: 10
Loose in bulk pack
Electrical Specification - maximum limiting values 3.3V ±10%
Frequency
Min
Frequency
Max
1.25MHz
40.0MHz
Temperature
Range
Stability
Current
Draw
Rise and Fall
Time
Duty Cycle
°C
ppm
mA
ns
%
0 to 50
±0.3
-
8
45/55%
-20 to 70
±0.5
-
8
45/55%
-30 to 75
±1.0
-
8
45/55%
-40 to 85
±1.0
-
8
45/55%
This document was correct at the time of printing; please contact your local sales office for the latest version.
Click to view latest version on our website.
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:58 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 3 of 4
TCXO Specification
CFPT-9006
Chipset Approval Table
IQD Model
Frequency
Chipset Type
IC Supplier
E2747LF
12.8MHz
Semtech
E2747LF
20MHz
E2799LF
12.8MHz
E2801LF
20MHz
E2912LF
12.8MHz
E3179LF
20MHz
E3179LF
20MHz
ACS1790T, ACS9510,
ACS9520T, ACS9522T,
ACS9550, ACS9593T,
ACS8522BT, ACS8509,
ACS8510, ACS8514, ACS8515,
ACS8520, ACS8520A, ACS8522
ZL30152, ZL30155, ZL30157,
ZL30159, ZL30160, ZL30165
ACS1790T, ACS9510,
ACS9520T, ACS9522T,
ACS9550, ACS9593T,
ACS8522BT, ACS8509,
ACS8510, ACS8514, ACS8515,
ACS8520, ACS8520A, ACS8522
ZL30152, ZL30155, ZL30157,
ZL30159, ZL30160, ZL30165
ACS1790T, ACS9510,
ACS9520T, ACS9522T,
ACS9550, ACS9593T,
ACS8522BT, ACS8509,
ACS8510, ACS8514, ACS8515,
ACS8520, ACS8520A, ACS8522
ZL30152, ZL30155, ZL30157,
ZL30159, ZL30160, ZL30165
BCM544841
E3198LF
12.8MHz
E3199LF
20MHz
E3394LF
12.8MHz
E4940LF
25MHz
E5624LF
12.8MHz
ACS1790T, ACS9510,
ACS9520T, ACS9522T,
ACS9550, ACS9593T,
ACS8522BT, ACS8509,
ACS8510, ACS8514, ACS8515,
ACS8520, ACS8520A, ACS8522
ZL30152, ZL30155, ZL30157,
ZL30159, ZL30160, ZL30165
ACS1790T, ACS9510,
ACS9520T, ACS9522T,
ACS9550, ACS9593T,
ACS8522BT, ACS8509,
ACS8510, ACS8514, ACS8515,
ACS8520, ACS8520A, ACS8522
ZL30152, ZL30155, ZL30157,
ZL30159, ZL30160, ZL30165
82V32### WAN PLLs
Microsemi
Semtech
Microsemi
Semtech
Microsemi
Broadcom
Semtech
Microsemi
Semtech
Broadcom
IDT
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 26 Apr 16 11:58 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 4 of 4
Similar pages