THOR F-EDFA Typical f-edfa application Datasheet

Data Sheet:
F-EDFA
F-EDFA series are CATV optical booster
amplifiers for gain spectrum bands within
1540-1565nm. These optical amplifiers
are designed for either single channel
applications or up to 8 DWDM
channels. In most applications, CATV fiber systems operate on a single wavelength with no
requirements on gain flatness. The F-EDFA booster amplifier offers low NF with a high saturated
output power. The unit features one of the worlds best pump lasers and utilizes OFS erbium doped
optical fiber made in America. The unit is designed with heat dissipation and ventilation
in mind to ensure a long operational life. A front panel LCD indicates unit status and has a warning
alarm, automatically switching off the pump laser when no input is detected. The F-EDFA also
features RS-232 and SNMP via RJ45 for remote system monitoring and management. With so many
features the F-EDFA series amplifiers offer high reliability and performance for any system
integration project.
Typical F-EDFA Application
Technical Specifications
Operating Wavelenth Range:
Input Power (dBm)
Max Output Power (dBm)
Output Adjustable Range
Output Ports
Difference Between Outputs
Noise Figure (Pin=0dBm)
Polarization Loss
Polarization Gain
Polarization Dispersion
Input/Output Isolation
Pump Power Leakage
Echo Loss
1540 – 1563 nm
-10 ~ +10 (Typ +3)
+10 ~ +26 dBm
-6 ~ 0 dBm
1 – 6 SC/APC 1 – 16 LC
-0.5 ~ +0.5 dB
6.3 dB
0.3 dB
0.4 dB
0.5 ps
30 dB
-30 dBm
55 dB
SNMP Network Interface
Communication Interface
Power Supply (V)
Power Consumption (W)
Working Temp
Storage Temp
Operating Humidity
Size (W)x(D)x(H)(“)
RJ45
RS232
90 – 265 VAC, 48VDC
50 W
-5 – 65 (°C)
-40 – 80 (°C)
5 – 90 (%)
19x14.5x1.75 – 1RU
12.4x15.4x5.25 (desk)
15.7x9.6x6.5 (outdoor)
Data Sheet: F-EDFA
www.thorfiber.com
Similar pages