Astrodyne DR1P5-05D15 Isolated and regulated 1.5 watt modular dc/dc converter Datasheet

DR1P5
I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters
series
Low Ripple and Noise
PI Input Filter
Regulated Outputs
500V Isolation
5 Sided EMI Shielding
Unit measures 0.8”W x 1.25”L x 0.4”H
Model Number
SINGLE OUTPUT
DR1P5-05S05(SMD)
DR1P5-12S05(SMD)
DR1P5-24S05(SMD)
DR1P5-05S12(SMD)
DR1P5-12S12(SMD)
DR1P5-24S12(SMD)
DR1P5-05S15(SMD)
DR1P5-12S15(SMD)
DR1P5-24S15(SMD)
DUAL OUTPUT
DR1P5-05D05(SMD)
DR1P5-12D05(SMD)
DR1P5-24D05(SMD)
DR1P5-05D12(SMD)
DR1P5-12D12(SMD)
DR1P5-24D12(SMD)
DR1P5-05D15(SMD)
DR1P5-12D15(SMD)
DR1P5-24D15(SMD)
Standard 24 Pin DIP & SMD Packages
Output Voltage Output mAmps Input Range
Input Current Efficiency
Max. Capacitive Load
5 VDC
12 VDC
15 VDC
+/-5 VDC
+/-12 VDC
+/-15 VDC
300
300
300
125
125
125
100
100
100
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
600mA
245mA
125mA
625mA
260mA
130mA
588mA
245mA
123mA
54%
55%
54%
52%
52%
52%
55%
55%
55%
470uF
470uF
470uF
330uF
330uF
330uF
330uF
330uF
330uF
+/-150
+/-150
+/-150
+/-60
+/-60
+/-60
+/-50
+/-50
+/-50
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
682mA
278mA
142mA
632mA
255mA
128mA
600mA
250mA
125mA
48%
49%
48%
51%
51%
51%
54%
54%
54%
330uF
330uF
330uF
110uF
110uF
110uF
110uF
110UF
110UF
Note - (SMD) Denotes that these products are available in a Surface Mount Technology Package. (Please see page 3) To order a DR1P5 product with the optional
Surfae Mount Package, simply add ”SMD” to the end of the standard Part Number. For example DR1P5-05S05SMD.
Order On-Line!
WWW.ASTRODYNE.COM
astrodyne.com
300 Myles Standish Blvd., Taunton, MA 02780
Ph: 1-800-823-8082
Fax: 508-823-8181
DR1P5
I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters
ENVIRONMENTAL SPECIFICATIONS
INPUT SPECIFICATIONS
Input Voltage Ranges:
5 VDC Nominal
12 VDC Nominal
24 VDC Nominal
4.5-5.5 VDC
10.8-13.2 VDC
21.6-26.4 VDC
PI Type
Input Filter
OUTPUT SPECIFICATIONS
Voltage and Current
Load Regulation 20% to FL
D05
All Others
Cross Regulation
Asymmetrical Load 25/100%
series
Oper. Temperature
Relative Humidity
Storage Temperature
Maximum Case Temp
Thermal Impedance
Thermal Shock
Vibration
-25 to +71 DegC(FL)
5 to 95%, RH
-55 to +105 DegC *
100 DegC *
20DegC/Watt
MIL-STD-810D
10~55Hz, 10G, 30 Minutes
along X, Y, and Z
5.53 MHrs
BELLCORE TR NWT 000332
Case1: 50% Stress,
Temp at 40DegC, Ground Fixed
and controlled environment
See Selection Chart
MTBF
+/-1.5%
+/- 0.5%
+/-5%
EMC
Line Regulation
Temperature Coefficient
Ripple/Noise(Single/Dual)
Voltage Accuracy
Short Circuit Protection
Conducted Emissions
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
+/- 0.3%
+/-0.02%/DegC
50mV Pk-Pk, typ
+/- 4%, max
Short Term
GENERAL SPECIFICATIONS
Input-Out Isolation
In/Out Capacitance
Efficiency
Switching Frequency
Isolation Resistance
PHYSICAL SPECIFICATIONS
500VDC
30 pF
52%, typ
20Khz
10000 M Ohms
Dimensions
Case Material
Potting Material
Construction
Weight
DIP
15.6g (0.55 oz)
SMD
18g (0.62 oz)
OUTPUT POWER (%)
OUTPUT DERATING CURVE
DR1P5-24S05 Derating Curve
100
1.25x0.80x0.40”
Nickel-Coated Copper
with Non-Conductive Base
Epoxy (UL-94-V0)
Fully Encapsulated
All specifications are typical at nominal input, full load, and 25DegC unless
otherwise noted
75
50
EN55022 Class A
EN55022 Class A
EN61000-4-2 Criteria B
EN61000-4-3 Criteria A
EN61000-4-4 Criteria B
EN61000-4-5 Criteria B
EN61000-4-6 Criteria A
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
Nature convection
25
0
-40 -25 -10 0
50
60
70
80
90 100
AMBIENT TEMPERATURE (ºC)
WWW.ASTRODYNE.COM
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
300 Myles Standish Blvd., Taunton, MA 02780
Ph: 1-800-823-8082
Fax: 508-823-8181
DR1P5
I s o l a t e d a n d R e gulated 1.5 WATT Modul ar DC/DC Converters
series
MECHANICAL DIMENSIONS
0.01 x 0.02 (0.25 x 0.50)
Rectangular Pin
1
2
3
15
14
13
10
11
12
1.25 (31.8)
0.90 (22.9)
24
23
22
0. 10 ( 2. 5)
0.08(2.0)
0.15
(3.8)
0.60(15.2)
0.40
(10.2)
0.80(20.3)
Pin #
Single Outputs
Dual Outputs
1
2
3
10
11
12
13
14
15
22
23
24
+ Input
NC
NC
- Output
+ Output
- Input
- Input
+ Output
- Output
NC
NC
+ Input
+ Input
- Output
Common
Common
+ Output
- Input
- Input
+ Output
Common
Common
- Output
+ Input
Pin #
Single Outputs
Dual Outputs
1
2
3
10
11
12
13
14
15
22
23
24
Others
+ Input
NC
NC
- Output
+ Output
- Input
- Input
+ Output
- Output
NC
NC
+ Input
NC
+ Input
- Output
Common
Common
+ Output
- Input
- Input
+ Output
Common
Common
- Output
+ Input
NC
SUFFIX - SMD
20
Pin Area
0.04 x 0.02
(1.0 x 0.5)
16
13
1
BOTTOM
VIEW
5
9
12
0.80(20.3)
WWW.ASTRODYNE.COM
0.43(10.9)
1.26 (32.0)
24
0.25 (6.35)
0.02(0.5)
0.92(23.4)
0.44(11.2)
0.15 (3.81)
0.10 (2.54)
1.00(25.4)
300 Myles Standish Blvd., Taunton, MA 02780
Ph: 1-800-823-8082
Fax: 508-823-8181
Similar pages