C SERIES Proven Reliabilit y MINIATURE, REGULATED HIGH VOLTAGE DC TO DC CONVERTERS 100V to 8kV at 1W PRODUCT SELECTION TABLE OUTPUT VOLTAGE MAXIMUM OUTPUT CURRENT*1 C01 0 to 100V 0 to 10mA C02 0 to 200V 0 to 5mA C03 0 to 300V 0 to 3.3mA PRODUCT DESCRIPTION C05 0 to 500V 0 to 2mA Miniature, well-regulated high voltage power supplies provide clean and reliable high voltage in a shielded, PC-mount package. Featuring precision 0 to 100% programmability and very low ripple and EMI/ RFI, these cost-effective power supplies are ideal for integration into compact, sensitive equipment. For 10kV output, see the CB Series. C06 0 to 600V 0 to 1.67mA C10 0 to 1kV 0 to 1mA C12 0 to 1.25kV 0 to 1mA C15 0 to 1.5kV 0 to 0.67mA C20 0 to 2kV 0 to 0.5mA C25 0 to 2.5kV 0 to 0.4mA C30 0 to 3kV 0 to 0.33mA C40 0 to 4kV 0 to 0.25mA C50 0 to 5kV 0 to 0.2mA C60 0 to 6kV 0 to 0.166mA C80 0 to 8kV 0 to 0.125mA Programming Voltage vs Output Voltage 100 90 Output Voltage (0 to 100%) U MODEL NOW IZED N G CO L RE 80 70 60 50 40 30 20 Complete List of Models on page 2 10 0 0 20 40 60 80 100 Programming Voltage (0 to 100% ) FEATURES APPLICATIONS • Photomultiplier Tubes • Solid State Detectors • Electrophoresis • Piezo Devices • Capacitor Charging • EO Lenses OPTIONS • Regulated • Low-Noise, Quasi-Sinewave Oscillator • Miniature Size • 0 to 100% Programmable Output • High Stability: <50ppm/°C (Typical) • Wide Input Voltage Range: 11.5 to 16V • Very Low EMI/RFI • High Reliability: MTBF >2.6 Million Hours per Bellcore TR-332 (Model C10) • Steel Case with Isolated Case Ground • Sealed to Withstand Immersion Cleaning Process • External Gain Adjust for Calibration • RoHS Compliant • UL Recognized • Flying Lead: Available for Models C01 through C20 (FL Suffix) E344664 WWW.XPPOWER.COM 4711CR PAGE 1 C SERIES ELECTRICAL SPECIFICATIONS*2 C01 - C80 (100V to 8kV) OUTPUT VOLTAGE (POSITIVE OR NEGATIVE) MODEL MAXIMUM RIPPLE OUTPUT P-P CURRENT*1 FULL-LOAD*3 REGULATION LOAD 0 TO 100%*3 LINE 11.5 TO 16.0V*3 FREQUENCY*3 0 to +100V C01 0 to 10mA <0.75 % <0.1% <0.1 % 200 - 250kHz 0 to +200V C02 0 to 5mA <0.05 % <0.1% <0.1 % 250 - 350kHz 0 to -200V C02N 0 to 5mA <0.05 % <0.1 % <1 % 75 - 150kHz 0 to +300V C03 0 to 3.3mA <0.03 % <0.1 % <0.1 % 200 - 300kHz 0 to +500V C05 0 to 2mA <0.004 % <0.07 % <0.1 % 250 - 350kHz 0 to -500V C05N 0 to 2mA <0.005 % <0.5 % <0.5 % 200 - 350kHz 0 to +600V C06 0 to 1.67mA <0.003 % <0.1 % <0.1 % 250 - 300kHz 0 to -600V C06N 0 to 1.67mA <0.003 % <0.75 % <0.75 % 125 - 300kHz 0 to +1,000V C10 0 to 1mA <0.005 % <0.3 % <0.3 % 200 - 250kHz 0 to -1,000V C10N 0 to 1mA <0.002 % <0.5 % <0.3 % 100 - 125kHz 0 to +1,250V C12 0 to 1mA <0.004 % <0.1 % <0.1 % 200 - 250kHz 0 to -1,250V C12N 0 to 1mA <0.003 % <0.175 % <0.1% 100 - 125kHz 0 to +1,500V C15 0 to 0.67mA <0.002 % <0.1 % <0.1 % 100 - 125kHz 0 to -1,500V C15N 0 to 0.67mA <0.002 % <0.2 % <0.2 % 75 - 100kHz 0 to +2,000V C20 0 to 0.5mA <0.002 % <0.15 % <0.1 % 75 - 100kHz 0 to -2,000V C20N 0 to 0.5mA <0.002 % <0.15% <0.1 % 75 - 100kHz 0 to +2,500V C25 0 to 0.4mA <0.1 % <0.3 % <0.2 % 125 - 150kHz 0 to -2,500V C25N 0 to 0.4mA <0.2 % <0.5 % <0.2 % 125 - 150kHz 0 to +3,000V C30 0 to 0.33mA <0.1 % <0.3 % <0.05 % 75 - 100kHz 0 to -3,000V C30N 0 to 0.33mA <0.2 % <0.3 % <0.075 % 75 - 100kHz 0 to +4,000V C40 0 to 0.25mA <0.1 % <0.25 % <0.2 % 50 - 125kHz 0 to -4,000V C40N 0 to 0.25mA <0.1 % <0.2 % <0.1 % 75 - 150kHz 0 to +5,000V C50 0 to 0.2mA <0.1% <0.35% <0.1% 75 - 150kHz 0 to -5,000V C50N 0 to 0.20mA <0.1 % <0.25% <0.1% 125 - 175kHz 0 to +6,000V C60 0 to 0.166mA <0.1 % <0.25% <0.1 % 125 - 175kHz 0 to -6,000V C60N 0 to 0.166mA <0.1 % <0.25% <0.15 % 125 - 175kHz 0 to +8,000V C80 0 to 0.125mA <0.2 % <0.75% <0.15 % 100 - 150kHz 0 to -8,000V C80N 0 to 0.125mA <0.2 % <0.75% <0.25 % 100 - 150kHz WWW.XPPOWER.COM 4711CR PAGE 2 C SERIES ELECTRICAL SPECIFICATIONS*2 C01 - C80 (100V to 8kV) PARAMETER INPUT VOLTAGE VALUE +11.5 to +16V <100mA, NO LOAD INPUT CURRENT <250mA, FULL LOAD INPUT CAPACITANCE 440uF LOW ESR PROGRAMMING VOLTAGE 0 to +5V, <100uA RESPONSE TIME <250msec (FULL LOAD, FULL-SCALE RESPONSE) SETPOINT ACCURACY +/-1% GAIN ADJUST 5 to 10% LINEARITY <1% (15% to 100% Vout) STABILITY <0.01% / HOUR TEMPCO <50PPM / °C*3 THERMAL SHOCK LIMIT 1°C / 10 SECONDS OPERATING TEMPERATURE -10 to +60°C*5 (CASE) STORAGE TEMPERATURE -20 to +90°C *6 *6 *6 DETAILED PRODUCT DESCRIPTION The C Series is a line of miniature, regulated high voltage power supplies. Each model is programmed from 0 to 100% of rated output via a 0 to +5 volt, DAC-compatible, high-impedance programming input voltage. Temperature drift is typically less than 50ppm/°C. These modules exhibit very low ripple, noise, and EMI/RFI by utilizing a quasi-sinewave oscillator, shielded transformer, excellent filtering techniques and an isolated steel enclosure featuring a separate grounding pin. An externally accessible potentiometer provides adjustable gain trim, allowing for individual calibration of units. A proprietary encapsulation process and a custom 94V-0 listed, high-performance formula are used to achieve excellent high voltage and thermal properties. Positive and negative outputs are standard. Also available with the C Series are the CM Series adapter kits. For more details, refer to pages 10 and 11. WWW.XPPOWER.COM 4711CR PAGE 3 C SERIES MECHANICAL SPECIFICATIONS C01 to C20 (100V to 2kV) RECOMMENDED PCB LAYOUT TOP VIEW TOP VIEW 0.09 (2.29) 4 0.350 (8.89) RECOMMENDED HOLE & PAD SIZE: ø 0.052 & ø 0.082 5 PLACES 1.11 (28.19) 0.100 (2.54) HIGH VOLTAGE 0.34 (8.64) 1.40 (35.56) 3 1 0.50 (12.70) 0 5 2 0.250 (6.35) 0.100 (2.54) 0.500 (12.7) 0.65 (16.51) 1 0.100 (2.54) 5 0 3 0.09 (2.29) 0.250 (6.35) 0.100 (2.54) 0 0.34 (8.64) 0.700 (17.78) 4 ø 0.187 (4.75) MIN FOR POT ACCESS 0.500 (12.7) 2 BOTTOM VIEW 0.45 (11.43) PC PINS 0.031 (.79) DIA 5 PLACES 0.45 (11.43) GAIN ADJUST 0.350 (8.89) 0.20 (5.08) 0.700 (17.78) 0 0.65 (16.51) Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) PARAMETER VALUE PIN # FUNCTION WEIGHT 1.1 OUNCES (31.0 GRAMS) 1 (+) INPUT VOLUME 0.77 CUBIC INCHES (12.62 CUBIC CENTIMETERS) 2 GROUND DIMENSIONS 1.40L (35.56L) x 1.11W (28.19W) x 0.50H (12.70H) 3 PROGRAMMING VOLTAGE CASE MATERIAL ZINC PLATED STEEL 4 HV OUT 5 CASE GROUND*4 WWW.XPPOWER.COM 4711CR PAGE 4 C SERIES MECHANICAL SPECIFICATIONS C25 to C40 (2.5kV to 4kV) TOP VIEW RECOMMENDED PCB LAYOUT 1.75 (44.45) 0.50 (12.70) 0.10 (2.54) PC PINS 0.031 (.79) DIA 5 PLACES GAIN ADJUST 0.65 (16.51) 0.500 (12.70) 2 BOTTOM VIEW 1 0.250 (6.35) 1 0.500 (12.70) 0.65 (16.51) ø 0.187 (4.75) MIN FOR POT ACCESS 0.45 (11.43) 0 0.100 (2.54) 0 0.10 (2.54) 0.250 (6.35) 0.350 (8.89) 0.150 (3.81) 0.32 (8.13) 1.000 (25.4) 0 5 0.100 (2.54) 5 3 4 0.45 (11.43) 3 4 2 0.20 (5.08) 0.350 (8.89) 0 0.150 (3.81) RECOMMENDED HOLE & PAD SIZE: ø 0.052 & ø 0.082 5 PLACES 0.32 (8.13) HIGH VOLTAGE 1.11 (28.19) 1.000 (25.4) TOP VIEW Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) PARAMETER VALUE PIN # FUNCTION WEIGHT 1.3 OUNCES (36.8 GRAMS) 1 (+) INPUT VOLUME 0.96 CUBIC INCHES (15.77 CUBIC CENTIMETERS) 2 GROUND DIMENSIONS 1.75L (44.45L) x 1.11W (28.19W) x 0.50H (12.70H) 3 PROGRAMMING VOLTAGE CASE MATERIAL ZINC PLATED STEEL 4 HV OUT 5 CASE GROUND*4 WWW.XPPOWER.COM 4711CR PAGE 5 C SERIES MECHANICAL SPECIFICATIONS C50 to C60 (5kV to 6kV) TOP VIEW RECOMMENDED PCB LAYOUT 2.60 (66.04) 0.50 (12.70) 2.10 (53.34) (HV OUTPUT LEAD) 0.20 (5.08) 5X ø 0.040 (1.02) P.C. PIN GAIN ADJUST 1 4 5 0 0.850 (21.59) 0.350 (8.89) 0.500 (12.70) 5 0.500 (12.70) 0.65 (16.51) RECOMMENDED HOLE & PAD SIZE: ø 0.052 (1.32) & ø 0.090 (2.29) 5 PLACES 0.100 (2.54) 0.10 (2.54) 1.15 (29.21) 0.500 (12.7) 0.850 (21.59) 0.250 (6.35) 0.350 (8.89) 0 0.18 (4.57) 1.20 (30.48) 3 BOTTOM VIEW ø 0.187 (4.75) MIN FOR POT ACCESS 0.500 (12.70) 2 HV OUTPUT LEAD (#22AWG 20KV SILICONE) 1 2 0.025 (.64) 0.30 (7.62) 0.250 (6.35) 0.10 (2.54) 0 0.100 (2.54) 3 4 10.00 ±1.00 (254.0 ± 25.4) 1.150 (29.21) 0.55 (14.10) 0 0.18 (4.57) HIGH VOLTAGE ø.104 (2.64) #2/M2 CLEARANCE FOR MOUNTING 2 PLACES 1.200 (30.48) 0.13 (3.18) 0.30 (7.62) 1.11 (28.19) TOP VIEW 2.350 (59.69) 0.20 (5.08) Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) PARAMETER VALUE PIN # FUNCTION WEIGHT 1.8 OUNCES (50.9 GRAMS) 1 (+) INPUT VOLUME 1.16 CUBIC INCHES (18.93 CUBIC CENTIMETERS) 2 GROUND DIMENSIONS 2.10L (53.34L) x 1.11W (28.19W) x 0.50H (12.70H) 3 PROGRAMMING VOLTAGE CASE MATERIAL ZINC PLATED STEEL 4 HV RETURN 5 CASE GROUND LEAD HV OUT WWW.XPPOWER.COM 4711CR PAGE 6 C SERIES MECHANICAL SPECIFICATIONS C80 (8kV) TOP VIEW 10.00 ± 1.00 (254.0 ± 25.4) 0.63 (15.88) 4 0 2.50 (76.20) 0.60 (15.24) 0.35 (8.89) 0.025 (.64) 0.20 (5.08) 5X ø 0.040 (1.02) P.C. PIN GAIN ADJUST HV OUTPUT LEAD (#22AWG 20KV SILICONE) 2 0 1 5 1.150 (29.21) 0.500 (12.70) 0.500 (12.70) 0.73 (5.84) 0.187 (4.75) MIN FOR POT ACCESS RECOMMENDED HOLE & PAD SIZE: ø 0.052 (1.32) & ø 0.090 (2.29) 5 PLACES 0.250 (6.35) 1.15 (29.21) 0.850 (21.59) 0.350 (8.89) 0.500 (12.70) 0 0.18 (4.57) 0.10 (2.54) 0.100 (2.54) 5 0.100 (2.54) 0.10 (2.54) 3 1.60 (40.64) 1 0.500 (12.70) 4 BOTTOM VIEW 0.250 (6.35) 3 2 (HV OUTPUT LEAD) 0.850 (21.59) 1.25 (31.75) 0.350 (8.89) HIGH VOLTAGE 0.30 (7.62) TOP VIEW 1.600 (40.64) 0.13 (3.18) 0.25 (6.35) RECOMMENDED PCB LAYOUT ø.104 (2.64) #2/M2 CLEARANCE FOR MOUNTING 2 PLACES 2.750 (82.55) 0 0.18 (4.57) 3.00 (88.90) Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) PARAMETER VALUE PIN # FUNCTION WEIGHT 2.0 OUNCES (56.6 GRAMS) 1 (+) INPUT VOLUME 1.88 CUBIC INCHES (30.73 CUBIC CENTIMETERS) 2 GROUND DIMENSIONS 2.50L (76.20L) x 1.25W (31.75W) x 0.60H (15.24H) 3 PROGRAMMING VOLTAGE CASE MATERIAL ZINC PLATED STEEL 4 HV RETURN 5 CASE GROUND LEAD HV OUT WWW.XPPOWER.COM 4711CR PAGE 7 C SERIES MECHANICAL SPECIFICATIONS C01-C20 - Flying Lead Option (100V TO 2kV) HV OUTPUT LEAD 22AWG 3KV, 0.07 (1.78) O.D. SILICONE WIRE, RED TOP VIEW RECOMMENDED PCB LAYOUT 0.25 (6.35) TOP VIEW 4 0.09 (2.29) 0.50 (12.70) 1 2 0.35 (8.89) PC PINS 0.031 (.79) DIA 4 PLACES 1 5 0 0.09 (2.29) 0 0.250 (6.35) 0.100 (2.54) 0.34 (8.64) 0 0.100 (2.54) 3 4 0.500 (12.7) 0.500 (12.7) 2 BOTTOM VIEW 0.100 (2.54) 0.65 (16.51) 0.350 (8.89) 0.45 (11.43) GAIN ADJUST 0 5 0.250 (6.35) 0.65 (16.51) ø0.187 (4.75) MIN FOR POT ACCESS 0.20 (5.08) 3 0.45 (11.43) 1.11 (28.19) 0.350 (8.89) RECOMMENDED HOLE & PAD SIZE: ø0.052 & ø0.082 4 PLACES 0.100 (2.54) HIGH VOLTAGE 0.34 (8.64) 1.40 (35.56) 10.00" Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) PARAMETER VALUE PIN # FUNCTION WEIGHT 1.1 OUNCES (31.0 GRAMS) 1 (+) INPUT VOLUME 0.77 CUBIC INCHES (12.62 CUBIC CENTIMETERS) 2 GROUND DIMENSIONS 1.40L (35.56L) x 1.11W (28.19W) x 0.50H (12.70H) 3 PROGRAMMING VOLTAGE CASE MATERIAL ZINC PLATED STEEL 4 CASE GROUND*4 LEAD HV OUT WWW.XPPOWER.COM 4711CR PAGE 8 C SERIES APPLICATION NOTES WWW.XPPOWER.COM 4711CR PAGE 9 C SERIES CM3: MODELS C25, C25N, C30, C30N, C40 and C40N MTG HARDWARE SUPPLIED TOP VIEW 15S SUB-MIN 'D' RECEPTACLE AMP # 747909-2 5.00 (127.00) 8 15 SOLDER CUP SIDE 1.80 (45.72) 1 9 SHV MATING CONNECTOR 15P SUB MIN-D PLUG (MALE) AMP # 747841-4 1.33 (33.78) .90 (22.86) .50 (12.7) 3.83 (97.28) SHV OUTPUT CONNECTOR .05 (1.27) THICK 2.33 (59.18) .82 (20.83) 1.300 (33.02) GAIN ADJUST 1.312 (33.32) .25 (6.35) Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) 2.200 (55.88) #4-40 MTG HOLE 4 PLACES ANODIZED ALUMINUM MOUNTING PLATE PRODUCT PRODUCT DESCRIPTION DESCRIPTION PROGRAMMING INSTRUCTIONS These adapters provide convenient prototyping and evaluation during system development and integration. They allow C Series modules to be mounted to a chassis instead of designed into a PC board. • Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn potentiometer to adjust high voltage. Extra filtering on the input and output improves performance. A schottky diode on the input provides reverse polarity protection. Input connector is via a 15P SUB MIN-D plug (mate supplied) and output is via an SHV style coaxial connector (mate supplied). • Remote Potentiometer: connect wiper arm to pin 3, other sides to pins 4 and 2. ORDERING INFORMATION: Please note when ordering a CM3 the C Series is not included and must be ordered separately. WWW.XPPOWER.COM OR OR • Remote Analog Signal: apply programming voltage to pin 3, return to pin 2. 4711CR PAGE 10 C SERIES CM4: MODELS C50, C50N, C60, C60N, C80 and C80N TOP VIEW MTG HARDWARE SUPPLIED 15S SUB-MIN 'D' RECEPTACLE AMP # 747909-2 6.77 (171.96) 8 15 HIGH VOLTAGE LGH MATING CONNECTOR SOLDER CUP SIDE 1.80 (45.72) 1 9 15P SUB MIN-D PLUG (MALE) AMP # 747841-4 1.40 (35.56) .75 (19.05) .50 (12.7) 5.25 (133.35) LGH OUTPUT CONNECTOR .05 (1.27) THICK 3.80 (96.52) .85 (21.59) 1.312 (33.32) 1.312 (33.32) GAIN ADJUST .24 (6.09) 1.30 (33.02) 3.700 (93.98) #4-40 MTG HOLE 4 PLACES PRODUCT PRODUCT DESCRIPTION DESCRIPTION These adapters provide convenient prototyping and evaluation during system development and integration. They allow C Series modules to be mounted to a chassis instead of designed into a PC board. Extra filtering on the input and output improves performance. A schottky diode on the input provides reverse polarity protection. Input connector is via a 15P SUB MIN-D plug (mate supplied) and output is via an LGH style coaxial connector (mate supplied). ORDERING INFORMATION: Please note when ordering a CM4 the C Series is not included and must be ordered separately. WWW.XPPOWER.COM ANODIZED ALUMINUM MOUNTING PLATE Dimensions are in inches (metric equivalents are in parentheses) Dimensional tolerances: .xx +/- 0.02 (0.51mm) .xxx +/- 0.005 (0.127mm) PROGRAMMING INSTRUCTIONS • Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn potentiometer to adjust high voltage. OR • Remote Potentiometer: connect wiper arm to pin 3, other sides to pins 4 and 2. OR • Remote Analog Signal: apply programming voltage to pin 3, return to pin 2. 4711CR PAGE 11 C SERIES BLOCK DIAGRAM HOW TO ORDER PART NUMBER SELECTOR: Model Number: C 10 N FL Model Output Voltage (See Table) Flying Lead (Optional) (Blank or FL) Polarity Designator (Blank or N) EXAMPLE: C10N (C-Series, 10 - Output Voltage, N - Negative, FL - Flying Lead (Optional) * Notes: 1. At maximum rated output voltage. 2. Specifications after 1 hour warm-up, full load, at 25°C unless otherwise indicated. 3. Typical performance 4. All grounds internally connected except case. There should not be more than 50 volts potential between the case ground (pin 5) and the circuit ground (pins 3 and 8). Isolated case assists low-noise design efforts. Case pin must be connected to ground for proper operation. 5. Proper thermal management techniques are required to maintain safe case temperature at maximum power output. 6. SET-POINT ACCURACY refers to the ability of the unit to accurately deliver the voltage intended by the applied programming. The resultant output voltage will be within +/-1% of that programmed. GAIN ADJUSTMENT refers to the ability to alter the gain of the circuit to bring the resultant output voltage to the programmed set point. This is intended to allow compensation for set-point accuracy error. LINEARITY refers to how much the transfer function can deviate from a straight line in the absence of any set-point error. XP-EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP-EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product changes. “Copy-exact” options are available. Please contact an XP-EMCO sales representative for more details. WWW.XPPOWER.COM 4711CR PAGE 12