Part Number: www.SunLED.com EMG24D 10mmx10mm LIGHT BAR PRELIMINARY SPEC Features z UNIFORM LIGHT EMITTING AREA. z EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY STANDARD SOCKETS. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z MECHANICALLY RUGGED. z I.C. COMPATIBLE. z BOTTOM SURFACE OF EPOXY IS NOT FLAT. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Unit MG (GaP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 565 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 568 nm Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PT 62.5 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature MG (GaP) °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 30 nm Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Part Number EMG24D Emitting Color Green Published Date : MAR.20.2008 Emitting Material GaP Luminous Intensity (IF=20mA) mcd Lens-color Green Diffused Drawing No : SDSA3895 min. typ. 4 19 V4 Wavelength nm λP Viewing Angle 2 θ 1/2 565 120° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com EMG24D 10mmx10mm LIGHT BAR MG Published Date : MAR.20.2008 Drawing No : SDSA3895 V4 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com EMG24D 10mmx10mm LIGHT BAR Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR.20.2008 Drawing No : SDSA3895 V4 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 10mmx10mm LIGHT BAR PACKING & LABEL SPECIFICATIONS Published Date : MAR.20.2008 EMG24D Drawing No : SDSA3895 EMG24D V4 Checked : B.L.LIU P.4/4