Shielded Inductors - Axial CTS5F Series SPECIFICATIONS Please specify tolerance code when ordering. CTS5F-1R0_ J = ±5%, K = ±10% From 1 µH to 100 µH Inductance (µH) L Test Freq. (MHz) Q Factor Min. CTS5F-1R0_ CTS5F-2R5_ CTS5F-5R0_ 1.0 2.5 5.0 7.9 7.9 7.9 55 45 35 CTS5F-100_ CTS5F-250_ CTS5F-500_ 10 25 50 2.5 2.5 2.5 CTS5F-101_ 100 2.5 Part Number Not shown at actual size. ctparts.com Q Test Freq. (MHz) SRF Min. (MHz) DCR Max. Ω) (Ω Rated DC (mA) 7.9 7.9 7.9 200 115 90 .05 .08 .12 2200 1700 1400 65 55 60 2.5 2.5 2.5 55 35 27 .42 .80 1.50 770 560 400 70 2.5 20 3.10 280 PHYSICAL DIMENSIONS Size mm inches A B Max. Max. 11.4 ± 0.25 3.81 ± 0.25 29.2 0.6430 0.15 ± 0.010 1.15 0.02535 RoHS CHARACTERISTICS Description: Axial leaded molded (shielded) inductor Applications: Used for high reliability applications. Vital for telecommunication applications. Ideal for various RF applications Operating Temperature: -55°C to +105°C Inductance Tolerance: ±5% & ±10% Testing: Inductance and Q are tested on an HP4285A at specified frequency Packaging: Bulk pack, 500 parts per bag, Tape & Reel, 2,500 parts per reel Current Rating: Based on .33 watt power dissipation for approximately 20°C temperature rise Marking: Printed with inductance code Miscellaneous: RoHS Compliant. Testing: Inductance is measured on an HP4285A at 1 kHz Leads: Soft copper and pre-tinned Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. 12.27.05 Technologies 22 AWG 0.45 ± 0.010 Compliant CENTRAL C Typ. Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice