Class 2 UL5085 - 3 Transformer 40VA - 50VA, Core 7/8”, Non-Inherently Energy Limited Series: CL - Lead Wires & Quick-Connects Power Rating 40VA to 50VA Secondary Fusing Required (Provided by Factory) Frequency 50/60Hz Insulation Class F (155°C) Agency Approvals: UL/cUL 5085-3 Class 2 Recognized (File E49606) Insulation File No. E95662 * Multi voltage combinations are available - consult factory. Class 2 Lead Wires Quick-Connects Type HX Foot Mount - Steel bracket welded to the bottom of the laminations for easy mounting Type GX Panel Mount - 0.156” (3.96 mm) diameter holes in each corner to allow direct mounting to a panel. Lead Wires: All leads are 18 AWG stranded 2/64” (0.794 mm) insulation thickness. Standard parts have 12” (305 mm) total length with 1/2” (12.7 mm) strip. Type BB Foot Mount, Pri & Sec on Same Side - Quick connect terminals with line and load terminations on the same side of transformer. Type AE Laydown, Pri & Sec on Top Side - Quick connect terminals with line and load terminations on the top of transformer. Type AB Foot Mount, Pri & Sec on Opposite Side - Quick connect terminals with line and load terminations on opposite sides of transformer Terminals: Standard male quick connects - 0.250” x 0.032” (6.35 x 0.81mm) Other available quick connects - 0.187” x 0.032” (4.75 x 0.81mm) Type BB - Foot Mount, Pri & Sec on Same Side Type HX - Foot Mount Type AE - Laydown, Pri & Sec on Top Side Type GX - Panel Mount Type AB - Foot Mount, Pri & Sec on Opposite Side Dimensions (Inches) A B Weight (Lbs) 40VA - E 2.000 0.890 0.740 50VA - LP 2.000 0.890 0.889 50VA - AW 2.470 1.250 0.968 Any application, Any requirement, Contact us for our Custom Designs 18 Sales Office: 300 W Factory Road, Addison IL 60101 • Phone: (630) 628-9999 • Fax: (630) 628-9922 • www.wabashtransformer.com Class 2 UL5085 - 3 Transformer 40VA - 50VA, Core 7/8”, Non-Inherently Energy Limited Class 2 Series: CL - Lead Wires & Quick-Connects Partial Selection Guide Primary Voltage Secondary Voltage 40 VA Size - 7/8” X 7/8” UL 50 VA Size - 7/8” X 7/8” UL 50 VA Size - 7/8” X 1-1/4” 208/230 24Vct ─ - ─ - CL50AW00-0CT* √ UL 12 CL40E11-000* √ CL50LP11-000* - CL50AW11-000* √ 24Vct ─ - ─ - CL50AW01-0CT* √ 277 24Vct CL40E02-0CT* √ ─ - CL50AW02-0CT* √ 120/208/240 24Vct ─ - ─ - CL50AW03-0CT* √ 120 480 24Vct CL40E04-0CT* √ ─ - CL50AW04-0CT* √ 120/208/240/480 24Vct ─ - ─ - CL50AW05-0CT* √ 600 24Vct CL40E06-0CT* √ ─ - CL50AW06-0CT* √ 120/240 24Vct ─ - ─ - CL50AW07-0CT* √ 24Vct CL40E40-0CT* √ ─ - CL50AW40-0CT* √ 12 CL40E10-000* √ CL50LP10-000* - CL50AW10-000* √ 12 CL40E50-000* √ CL50LP50-000* - CL50AW50-000* √ 24Vct CL40E15-0CT* √ ─ - CL50AW15-0CT* √ 380/415 24Vct ─ - ─ - CL50AW17-0CT* √ 575 24Vct ─ - ─ - CL50AW21-0CT √ - ─ - 240 208/240 215/230 24Vct ─ CL50AW22-0CT* √ 208/240/277 24Vct ─ - ─ - CL50AW23-0CT* √ 480/575 24Vct ─ - ─ - CL50AW30-0CT √ 120/277 24Vct ─ - ─ - CL50AW41-0CT √ 208/240/480 24Vct ─ - ─ - CL50AW44-0CT* √ 208 24Vct ─ - ─ - CL50AW45-0CT √ 220/240 24Vct ─ - ─ - CL50AW47-0CT √ 100 24Vct CL40E48-0CT* √ ─ - CL50AW48-0CT* √ 220 24Vct ─ - ─ - CL50AW49-0CT* √ 115 24Vct ─ - ─ - CL50AW51-0CT* √ 265 24Vct ─ - ─ - CL50AW52-0CT* √ 346 24Vct ─ - ─ - CL50AW53-0CT* √ 208/230/460 24Vct ─ - ─ - CL50AW54-0CT √ - ─ - 400 24Vct ─ CL50AW55-0CT* √ 200/230/460 24Vct ─ - ─ - CL50AW58-0CT* √ 230/460 24Vct ─ - ─ - CL50AW59-0CT* √ 380/460 24Vct ─ - ─ - CL50AW60-0CT* √ * Refer to page number 7. Must complete part number to specify voltages, termination, mounting & fusing. For custom designs 3 digit customer ID will be added at the end of the part number. Lead Wire Details: Primary Voltage Color Secondary Voltage Color COM Black COM Blue 110,115,120 White 12 Yellow 200,208,215 Red 24 Blue 220, 230, 240 Orange 265, 277 Brown 380 Violet 400, 415 Red/White 460, 480 Grey 575 Black/Red 600 Black/White Standard leads: All leads are 12.0” L.O.C (length out of coil) 1/2” strip Any application, Any requirement, Contact us for our Custom Designs Sales Office: 300 W Factory Road, Addison IL 60101 • Phone: (630) 628-9999 • Fax: (630) 628-9922 • www.wabashtransformer.com 19