BR1505W THRU BR1510W SILICON BRIDGE RECTIFIERS Reverse Voltage - 50 to 1000 Volts Forward Current - 15.0 Amperes BR-15W FEATURES 0.452 (11.5) METAL HEAT SINK The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,at 5 lbs. (2.3kg) tension MAX. 0.591 MAX. (15.0) 0.042(1.10) DIA. 0.038(0.97) 1.181(30.0) 1.102(28.0) 0.673(17.1) 0.633(16.1) HOLE FOR NO.8 SCREW MECHANICAL DATA AC + 0.732(18.6) 0.692(17.6) 1.181(30.0) 1.102(28.0) Case: Molded plastic body Terminals: Lead 0.040” (1.02mm) diameter. Polarity: Polarity symbols marked on case Mounting:Thru hole for #8 screw,20in.-lbs. torque max. Weight:0.61 ounce, 17.4 grams 0.468(11.9) 0.429(10.9) - AC 0.732(18.6) 0.692(17.6) 0.033x.250 (0.8x6.4) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for current capacitive load urrent derate by 20%. SYMBOLS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TC=55 C (Note 1,2) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage dorp per bridge element at 7.5A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Isolation voltage from case to leads Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range VRRM VRMS VDC BR 1505W 50 35 50 BR 151W 100 70 100 BR 152W BR 154W 200 140 200 400 280 400 BR 156W 600 420 600 BR 158W 800 560 800 BR 1510W UNITS 1000 700 1000 VOLTS VOLTS VOLTS I(AV) 15 Amps IFSM 300.0 Amps I2t 373 A2s VF 1.1 Volts 10 1.0 2500 2.0 -65 to +150 -65 to +150 uA mA IR VISO RqJA TJ TSTG NOTES: 1.Unit mounted on 5” x 4” x3” thick(12.8cmx10.2cmx7.3cm)Al.plate. 2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #8 screw. www.shunyegroup.com.cn VAC C/W C C RATINGS AND CHARACTERISTIC CURVES BR1505W THRU BR1510W AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1- FORWARD CURRENT DERATING CURVE 12 9 Single Phase Half Wave 60Hz Resistive or inductive Load 6 3 0 0 25 50 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT £PEAK FORWARD SURGE CURRENT, AMPERES 15 75 100 125 150 300 250 200 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 175 50 1 10 AMBIENT TEMPERATURE, C FIG. 4-TYPICAL REVERSE CHARACTERISTICS FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1,000 100 10 1 TJ=25 C PULSE WIDTH=300 ms 1%DUTY CYCLE 0.1 0.6 0.8 1.0 1.2 1.4 1.5 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES 200 100 TJ=100 C 10 1 TJ=25 C 0.1 0.01 INSTANTANEOUS FORWARD VOLEAGE, VOLTS 20 40 60 80 TJ=25 C 100 10 1 0.1 0.01 0.01 0.1 1 10 10 0.1 1.0 10 100 FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/W FIG. 5-TYPICAL JUNCTION CAPACITANCE 1000 0 PERCENT OF PEAK REVERSE VOLTAGE,% 2000 JUNCTION CAPACITANCE, pF 100 NUMBER OF CYCLES AT 60 Hz 100 REVERSE VOLTAGE,VOLTS www.shunyegroup.com.cn t,PULSE DURATION,sec. 100