BAT64... Silicon Schottky Diodes • For low-loss, fast-recovery, meter protection, bias isolation and clamping application • Integrated diffused guard ring • Low forward voltage • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT64 BAT64-02W BAT64-04 BAT64-04W ! BAT64-05 BAT64-05W ! , BAT64-06 BAT64-06W ! , , ! , , , ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT64 BAT64-02W BAT64-04 BAT64-04W BAT64-05 BAT64-05W BAT64-06 BAT64-06W Package SOT23 SCD80 SOT23 SOT323 SOT23 SOT323 SOT23 SOT323 Configuration single single series series common cathode common cathode common anode common anode 1Pb-containing package may be available upon special request 1 LS(nH) 1.8 0.6 1.8 1.4 1.8 1.4 1.8 1.4 Marking 63s 64 64s 64s 65s 65s 66s 66s 2007-06-11 BAT64... Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Value Unit Diode reverse voltage VR 40 V Forward current IF 250 mA Non-repetitive peak surge forward current I FSM 800 Average rectified forward current (50/60Hz, sinus) I FAV Total power dissipation Ptot 120 BAT64, TS ≤ 86°C 250 BAT64-02W, TS ≤ 121°C 250 BAT64-04, BAT64-06, TS ≤ 61°C 250 BAT64-04W, BAT64-06W, TS ≤ 111°C 250 BAT64-05, TS ≤ 36°C 250 BAT64-05W, TS ≤ 104°C 250 (t ≤ 10ms) Junction temperature Tj Storage temperature T stg mW 150 °C -55 ... 150 Thermal Resistance Parameter Symbol Junction - soldering point 1) RthJS Value K/W BAT64 ≤ 255 BAT64-02W ≤ 115 BAT64-04, BAT64-06, ≤ 355 BAT64-04W, BAT64-06W ≤ 155 BAT64-05 ≤ 455 BAT64-05W ≤ 185 1For Unit calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-06-11 BAT64... Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. 40 - - DC Characteristics Breakdown voltage V(BR) V I(BR) = 10 µA Reverse current IR µA VR = 30 V - - 2 VR = 30 V, TA = 85 °C - - 200 Forward voltage mV VF IF = 1 mA 270 320 350 IF = 10 mA 310 385 430 IF = 30 mA 370 440 520 IF = 100 mA 500 570 750 CT - 4 6 pF trr - - 5 ns AC Characteristics Diode capacitance VR = 1 V, f = 1 MHz Reverse recovery time I F = 10 mA, IR = 10 mA, measured IR = 1 mA , RL = 100 Ω 3 2007-06-11 BAT64... Diode capacitance CT = ƒ (VR) Reverse current IR = ƒ(VR) TA = Parameter f = 1MHz 10 CT BAT 64... EHB00059 pF 10 2 µA ΙR BAT 64... EHB00058 TA = 125 C 8 10 1 7 85 C 6 10 0 5 4 10 -1 25 C 3 2 10 -2 1 0 0 10 20 V 10 -3 30 0 10 20 Forward current IF = ƒ (VF) Forward current IF = ƒ (T S) TA = Parameter BAT64W 2 BAT 64... 30 300 EHB00057 mA 10 1 TA = -40 25 85 125 10 0 200 C C C C IF ΙF 10 mA V VR VR 150 100 10 -1 50 10 -2 0 0.5 V 0 0 1 15 30 45 60 75 90 105 120 °C 150 TS VF 4 2007-06-11 BAT64... Forward current IF = ƒ (T S) Forward current IF = ƒ (T S) BAT64-02W BAT64-04, BAT64-06 300 300 mA mA IF 200 IF 200 150 150 100 100 50 50 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 15 30 45 60 75 90 105 120 °C TS 150 TS Forward current IF = ƒ (T S) Forward current IF = ƒ (T S) BAT64-04W, BAT64-06W BAT64-05 300 300 mA mA 200 IF IF 200 150 150 100 100 50 50 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS 5 2007-06-11 BAT64... Forward current IF = ƒ (T S) Permissible Puls Load R thJS = ƒ (tp) BAT64-05W BAT64-02W 10 3 300 K/W mA RthJS IF 10 2 200 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 150 100 10 0 50 0 0 15 30 45 60 90 105 120 °C 75 10 -1 -6 10 150 10 -5 10 -4 10 -3 10 -2 TS s 10 0 10 0 tP Permissible Pulse Load Permissible Puls Load R thJS = ƒ (tp) IFmax / I FDC = ƒ (tp ) BAT64-04W, BAT64-06W BAT64-02W 10 2 10 3 IFmax/IFDC K/W D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0 -6 10 RthJS 10 2 10 -5 10 -4 10 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 -3 10 -2 s 10 10 -1 -6 10 0 tP 10 -5 10 -4 10 -3 10 -2 s tP 6 2007-06-11 BAT64... Permissible Pulse Load Permissible Puls Load R thJS = ƒ (tp) IFmax / I FDC = ƒ (tp ) BAT64-05W BAT64-04W, BAT64-06W 10 2 10 3 - 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 R thJS I Fmax/IFDC K/W 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 10 -1 -6 10 0 tP 10 -5 10 -4 10 -3 10 -2 s 10 0 tP Permissible Pulse Load IFmax / I FDC = ƒ (tp ) BAT64-05W IFmax/IFDC 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 7 2007-06-11 Package SCD80 BAT64... Package Outline 0.2 M A +0.05 0.13 -0.03 0.8 ±0.1 0.2 ±0.05 10˚MAX. 1.7 ±0.1 1 0.3 ±0.05 Cathode marking 7˚ ±1.5˚ 1.3 ±0.1 A 2 0.7 ±0.1 0.35 1.45 Foot Print 0.35 Marking Layout (Example) 2005, June Date code BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Reel with 2 mm Pitch 2 0.2 2.5 8 1.45 Standard 4 Cathode marking 0.4 0.9 Cathode marking 8 0.7 2007-06-11 BAT64... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014 01 a p A P a p A P a p A P 02 b q B Q b q B Q b q B Q 03 c r C R c r C R c r C R 04 d s D S d s D S d s D S 05 e t E T e t E T e t E T 06 f u F U f u F U f u F U 07 g v G V g v G V g v G V 08 h x H X h x H X h x H X 09 j y J Y j y J Y j y J Y 10 k z K Z k z K Z k z K Z 11 l 2 L 4 l 2 L 4 l 2 L 4 12 n 3 N 5 n 3 N 5 n 3 N 5 1) New Marking Layout for SC75, implemented at October 2005. . 9 2007-06-11 Package SOT23 BAT64... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 ±0.1 1 2.4 ±0.15 3 0.1 MAX. 10˚ MAX. B 1 ±0.1 10˚ MAX. 2.9 ±0.1 0.15 MIN. Package Outline A 5 0...8˚ 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 10 2007-06-11 Package SOT323 BAT64... Package Outline 0.9 ±0.1 2 ±0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 ±0.1 0.1 MIN. 2.1 ±0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 11 2007-06-11 BAT64... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 12 2007-06-11