BIAS 2 Watt Power Supply BPSX 2 Series Data Sheet Single (Vo) or Dual (Vo & Vr) output BPSX 2-08-00, -08-33, -08-50 BPSX 2-14-00, -14-33, -14-50 BPSX 2-24-00 Actual Size Features: The BPSX is a revolutionary, micro-sized, drop-in switching power supply module. It contains patented technology with unique features that provide solutions for a wide range of applications, including low power wireless and many other intelligent control devices. The patented SMPS topology is totally different from any other: It's Quiet: Switching is synchronized and occurs only 10% of the time, so there is very little EMI / EMC interference with other circuits. This means no extra filtering or shielding is needed, helping to achieve longer transmission range with more reliable data communication in low power wireless applications. • • • • • • • • Extended Temperature with NO DE-RATING! (-40 to +85°C ) Universal Input (85-265 VAC, 50/60Hz) Small Size—0.87in3 [14.3cm3] Low no-load input power <30mW Constant power mode (not current limit) 3000 VAC Isolation EN 55022, Class B; FCC Part 15, Class B Meets UL/CSA and EN Product Safety (ITE) It's Powerful: No power de-rating across the full wide temperature range. Bias Power AC/DC power supplies are available with two No current limit design margin needed when selecting a module. Charge different types of outputs to fit your applications… large super caps faster than any regular SMPS with twice the power rating. It's Green: High efficiency with ultra low standby power and very little self generated heat make it ideal for intelligent devices such as smart-sensors, smart-meters, smart-lighting, smart-grid, M2M or IoT , and any other control applications. Operating Specifications (@120VAC / 60 Hz / 25oC unless otherwise specified) Electrical Input Voltage Range Input Surge Withstand Output Power (Pmax) Efficiency Output Vo (Peak) Line / Load Regulation Vo (Peak) Temperature Regulation Vo (Peak) Ripple Vo (@120 Hz) (@ 100 kHz) Output Vr, 3.3 volt (+/- 5%) Output Vr, 5.0 volt (+/- 5%) No-load Consumption Isolation Earth Leakage @ 120 VAC Short Circuit Protection Reliability @ 25° C, MIL HDBK-217F Thermal Operating Temperature Operating Relative Humidity Storage Temperature Mechanical Package Size (L x W x H) Safety Safety Compliance EMI Emissions 85 - 265 VAC (50/60Hz) 308V, < 30 sec 2.0 W (60Hz) 1.67 W (50Hz) 70% nom. 8, 14 or 24 VDC nom. +/- 5% +/- 1% Po < Pmax +/- 2% Po < Pmax 1.00 V p:p 0.25 V p:p For Vo = 8V, Ir out 160mA max, Io+Ir ≤ 250mA* For Vo = 14V, Ir out 70mA max, Io+Ir ≤ 143mA* For Vo = 8V, Ir out 250mA max, Io+Ir ≤ 250mA* For Vo = 14V, Ir out 83mA max, Io+Ir ≤ 143mA* 30 mW typical @ Vin=120 VAC 3000 VAC (meets UL / CSA & EN Product Safety) < 10 uA Continuous, Pin ≤ 0.6 w @ Vin = 120 VAC > 500 Khr MTBF The characteristics of the main (Vo) and auxiliary (Vr) outputs are different and each has application-specific benefits which can provide high value to the system designer: Vo is a voltage-regulated output which has a constant power mode instead of a conventional current limit. This output is best suited as a source for isolated DC utility power, which may be used directly or post-regulated with either a linear regulator or a DC/DC converter. Vo is self protecting, cannot be overloaded and can be shorted indefinitely. So unlike design-yourown, or partially complete modules where significant design margin is required to stay far away from current limit, there is no need to oversize a Bias Power supply. The graceful transition from voltage regulation to constant power along with the wide range of product ratings allows the designer to select a supply tightly matched to the design load. Vr is also a voltage-regulated output and is thermally protected from overload. It has very low output ripple capable of driving elements which require a low-noise, tightly-regulated supply. In addition, Vr is supplied internally by Vo. This means that any capacitance added to Vo can increase the hold-up time of Vr as well. *Note: maximum currents specified for constant voltage range only. See V-I curve on page 2 for Vo in constant power range. -40 to +85o C 0 – 95%, non-condensing -40 to +105o C 1.35 x 1.12 x 0.58 inches [34.214 x 28.372 x 14.757 mm] UL / EN 60950-1 2nd Ed. (CB Report Available) EN 55022, Class B, FCC Part 15, Class B www.biaspower.com BPSX 2 Series Data Sheet, Page 1 of 2 Revised 12/10/2013 Specifications subject to change BIAS 2 Watt Power Supply BPSX 2 Series Data Sheet Single (Vo) or Dual (Vo & Vr) output BPSX 2-08-00, -08-33, -08-50 BPSX 2-14-00, -14-33, -14-50 BPSX 2-24-00 PIN DESCRIPTION L1 Input High L2 Input Low N/C No Connection Vo Output GND Ground Vr Vr Output N/C No Connection Part Number Designation Part Number Output Configuration Vo Vr BPSX 2-08-00 Single output 8 VDC N/A BPSX 2-14-00 Single output 14 VDC N/A BPSX 2-24-00 Single output 24 VDC N/A BPSX 2-08-33 Dual Output 8 VDC 3.3 VDC BPSX 2-08-50 Dual Output 8 VDC 5 VDC BPSX 2-14-33 Dual Output 14 VDC 3.3 VDC BPSX 2-14-50 Dual Output 14 VDC 5 VDC 1. Recommended Land Pattern, top view 2. NOTES Pins 0.031” [0.787 mm] round Pins extend 0.125” [3.175 mm] below stand-offs Recommended Isolation, Bottom View V-I Curve (For Vo in Constant Power Range) Vo, volts V-I, typical 10 9 8 7 6 5 4 3 2 1 0 Constant Power Region 0 www.biaspower.com 100 200 300 400 Io, mA 500 600 700 800 BPSX 2 Series Data Sheet, Page 2 of 2 Revised 12/10/2013 Specifications subject to change Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: BIAS Power: BPSX 2-05-00 BPSX 2-05-33 BPSX 2-08-00 BPSX 2-08-33 BPSX 2-08-50 BPSX 2-12-00 BPSX 2-12-33 BPSX 212-50 BPSX 2-14-00 BPSX 2-14-33 BPSX 2-14-50 BPSX 2-24-00 BPSX 2-24-33 BPSX 2-24-50