DATASHEET Rev. B DCHF60W SERIES 2:1 Input Voltage Ranges 5, 12, 24, & 48VDC Single Outputs 60 Watts Output Power DC/DC Chassis Mount Power Converters FEATURES High Reliability Single Output Built-in EMI Filter RoHS Compliant 60W Output Power ±10% Voltage Adjustment Range Dimensions: 6.30 x 3.86 x 1.54 Inches Free Air Convection Short Circuit and Over Load Protected 2:1 Input Voltage Ranges DESCRIPTION The DCHF60W series of DC/DC power converters offers 60W of output power in a 6.30” x 3.86” x 1.54” enclosed case. This series has 2:1 input voltage ranges of 18-36VDC, 36-72VDC, and 72-144VDC. The DCHF60W series also has 5V, 12V, 24V, and 48VDC single outputs available. Some features include ±10% output adjustability, a built-in EMI filter, and over load and short circuit protection. These supplies are also RoHS compliant. 12/07/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 DCHF60W Series Single Outputs 60 Watts, Chassis Mount DC/DC Power Converters Rev. B SPECIFICATIONS: DCHF60W SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max 24VDC nominal input models 18 24 36 48VDC nominal input models 36 48 72 110VDC nominal input models 72 110 144 Unit INPUT SPECIFICATIONS Input Voltage Range VDC OUTPUT SPECIFICATIONS Output Voltage See Table Output Voltage Adjustment Range Line Regulation Full load -10 +10 % ≤ -0.5 ≤ +0.5 % Load Regulation 0.5 % Output Current See Table Output Power See Table Ripple & Noise See Table PROTECTION Over Load Protection 110 Short Circuit Protection 150 % Yes GENERAL SPECIFICATIONS Efficiency See Table Input to Output Withstand Voltage Input to FG Isolation Resistance 1000 All for 1 minute VDC 1000 Output to FG 500 At 500VDC > 100 MΩ ENVIRONMENTAL SPECIFICATIONS Operating Temperature -10 +50 °C Operating Humidity (non-condensing) 20 90 % RH Storage Temperature -20 +85 °C Storage Humidity (non-condensing) 20 95 % RH Cooling Method Free air convection PHYSICAL SPECIFICATIONS Dimensions (L x W x H) 6.30 x 3.86 x 1.54 inches (160 x 98 x 39 mm) Weight 15.5oz (440g) SAFETY & EMC CHARACTERISTICS Safety Standards Design refer to LVD EMC Standards Design refer to EN55022, EN61000-4 05/24/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 DCHF60W Series Single Outputs 60 Watts, Chassis Mount DC/DC Power Converters Rev. B MODEL SELECTION TABLE Model Input Voltage DCHF60W-SD24-5 Output Voltage Output Current Ripple & Noise Output Power Efficiency 5 VDC 12.0 A 100mVp-p 60W 70% DCHF60W-SD24-12 24 VDC 12 VDC 5.0 A 120mVp-p 60W 72% DCHF60W-SD24-24 (18 – 36 VDC) 24 VDC 2.5 A 150mVp-p 60W 74% DCHF60W-SD24-48 48 VDC 1.3 A 200mVp-p 62.4W 75% DCHF60W-SD48-5 5 VDC 12.0 A 100mVp-p 60W 70% DCHF60W-SD48-12 48 VDC 12 VDC 5.0 A 120mVp-p 60W 72% DCHF60W-SD48-24 (36 – 72 VDC) 24 VDC 2.5 A 150mVp-p 60W 74% DCHF60W-SD48-48 48 VDC 1.3 A 200mVp-p 62.4W 75% DCHF60W-SD110-5 5 VDC 12.0 A 100mVp-p 60W 70% DCHF60W-SD110-12 110 VDC 12 VDC 5.0 A 120mVp-p 60W 72% DCHF60W-SD110-24 (72 – 144 VDC) 24 VDC 2.5 A 150mVp-p 60W 74% 48 VDC 1.3 A 200mVp-p 62.4W 75% DCHF60W-SD110-48 MECHANICAL DRAWING Unit: inches (mm) 0.87 (22) 4.61 (117) PIN CONNECTIONS 0.41 (10.5) 0.75 (19) 0.71 (18) 3 - M3 0.18 (4.5) 5.98 (152) 1.30 (33) 2 4 - M3 DC Input (V-) DC Input (V+) 3 FG 4,5 DC Output (V-) 6,7 DC Output (V+) _ + 3 5 6 -V +V +V 7 0.94 (24) -V DC OUTPUT 4 1.26 (32) 3.37 (85.5) 3.86 (98) 0.32 (8.25) 1 Assignment 1 2 Screw Size: M3*6 DC INPUT 5.91 (150) 0.14 (3.5) 0.26 (6.5) 0.14 (3.5) Pin No 0.47 (12) 1.12 (28.5) 0.28 (7) 1.54 (39) Ø0.14 (Ø3.5) 3.07 (78) Ø0.14 (Ø3.5) 6.30 (160) 05/24/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 Rev. B DCHF60W Series Single Outputs 60 Watts, Chassis Mount DC/DC Power Converters COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 05/24/2011 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4