4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APEKA4030VGC/A-F01 GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features z4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm G-SiC Light Emitting Diode. THICKNESS. zLOW The Green source color devices are made with InGaN on Static electricity and surge damage the LEDS. POWER CONSUMPTION. zWIDE VIEWING ANGLE. It is recommended to use a wrist band or anti-electrostatic zIDEAL FOR BACKLIGHT AND INDICATOR. glove when handling the LEDs. zPACKAGE zMOISTURE zRoHS All devices, equipment and machinery must be electrically :500PCS / REEL. SENSITIVITY LEVEL : LEVEL 4. grounded. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5756 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP:1204000836 Selection Guide Dice Part No. APEKA4030VGC/A-F01 Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) Viewing Angle [1] Min. Typ. 2 θ 1/2 70 220 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD[1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF[2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5756 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP:1204000836 Green APEKA4030VGC/A-F01 SPEC NO: DSAG5756 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP:1204000836 APEKA4030VGC/A-F01 Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5756 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP:1204000836 PACKING & LABEL SPECIFICATIONS APEKA4030VGC/A-F01 SPEC NO: DSAG5756 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP:1204000836