CAN-Bus Common Mode Chokes Current compensated surface mount common mode chokes for controller area networks (CAN-Bus) in automotive, industrial and medical applications. Features: • Surface Mount • Accurate current matching capability over a broad range of inductance values • Sector wound coils at 25 & 51 µH to filter differential mode noise from the data signal. • Low distortion • Custom designs possible • Smaller ( 1812 ) size parts are also available. Applications: • Automotive controller area network systems • Industrial controls controller area network systems • Medical monitoring systems • Filtering common mode EMI on high speed differential lines such as network and telecom applications CC 1812 C 513 R -10 Product Series Code Part Size Code Rated Current Code Impedance Value Code Packaging Code Additional Description Operating Temperature Range: -40°C to +125°C (0°C to 125°C for Lp > 1000 µm) Lp Inductance (mH) PART NUMBER Test Conditions MIN NOM MAX CC1812C513R-10 100 KHz / 50 mV 35.7 51.0 66.3 CC2824J502R-10 100 KHz / 50 mV 3.5 5.0 6.5 CC2824E113R-10 100 KHz / 50 mV 7.7 11.0 14.3 CC2824E253R-10 100 KHz / 50 mV 17.5 25.0 32.5 CC2824E513R-10 100 KHz / 50 mV 35.0 51.0 66.3 CC2824E474R-10 100 KHz / 50 mV 329.0 470.0 611.0 CC2824E105R-10 100 KHz / 50 mV 700.0 1000.0 1500.0 CC2824D225R-10 10 KHz / 50 mV 1540.0 2200.0 3300.0 CC2824B475R-10 10 KHz / 50 mV 3290.0 4700.0 7050.0 Impendance (Z) 3500 W @40 MHz 400 W @500 MHz 800 W @200 MHz 2000 W @100 MHz 3800 W @50 MHz 8600 W @5 MHz 4250 W @7 MHz 5300 W @5 MHz 12300 W @2 MHz L leakage (mh) Hi-Pot ( VAC ) 0.5 mA 2 sec. DCR Typical (W) ldc (mA) continuous 2.60 250 0.50 200 0.05 250 0.10 1200 0.05 250 0.12 800 1.50 250 0.13 800 2.00 250 0.16 800 0.20 750 0.20 700 0.20 750 0.20 700 0.25 750 0.40 500 0.30 750 0.55 400 Dimensions PART NUMBER A mm (inches) B mm (inches) C mm (inches) CC2824 7.50 MAX (0.295 MAX) 5.50 MAX (0.217 MAX) 3.80 MAX (0.150 MAX) CC1812 5.00 MAX (0.197 MAX) 3.50 MAX (0.138 MAX) 5.55 MAX (0.140 MAX) A A B B C C CC2824 Surface Mount CC1812 Surface Mount www.lairdtech.com SIP-BRO-CANBUS-0208 Typical Insertion Loss @ 50 Ω CC2824E113R-10 CC2824J502R-10 0 0 -2 -5 -4 IL (dB) -6 -10 IL (dB) -8 -10 -15 -12 -20 -14 -16 1 10 100 -25 1000 1 10 CC2824E253R-10 0 100 1000 Frequency (MHz) Frequency (MHz) 0 CC1812C513R-10, CC2824E513R-10 -5 -5 -10 -10 -15 IL (dB) IL (dB) -15 -20 -20 -25 -25 -30 -35 1 -30 1 10 100 1000 10 Frequency (MHz) CC2824E471R-10 0 100 1000 Frequency (MHz) CC2824E105R-10 0 -5 -5 -10 -10 IL (dB) -15 IL (dB) -15 -20 -20 -25 -25 -30 -35 0.1 -30 1 10 100 1000 1 10 Frequency (MHz) CC2824D225R-10 0 -5 -10 -10 -15 -15 -20 -20 IL (dB) IL (dB) 1000 CC2824B475R-10 0 -5 -25 -25 -30 -30 -35 -35 -40 -40 0.1 100 Frequency (MHz) -45 1 10 Frequency (MHz) 100 1000 0.1 1 Frequency (MHz) 10 100 www.lairdtech.com SIP-BRO-CANBUS-0208