Panasonic EYGS0811ZLGH Soft-pgs (compressible type) pgs with low thermal resistance Datasheet

“Soft-PGS (Compressible Type)” PGS with low thermal resistance
“Soft-PGS (Compressible Type)” PGS
with low thermal resistance
Type:
EYGS
Soft-PGS (Compressible Type) is a graphite sheet that is dedicated for
use as a thermal interface material.
The Soft-PGS (Compressible Type) has very high compressibility compared
to standard PGS, which enables reducing the thermal resistance by
following gap, warpage, and distortion of targets/substrates.
Excellent heat resistance and reliability of the Soft-PGS help obtaining
longer service life and higher performance of various components, such
as power modules.
The Soft-PGS (Compressible Type) is cost-saving, because it may
allow you to reduce your existing processes. Unlike grease, there is no
necessity for printing process , since it is a sheet-type product.
There are no problems that are found in grease and phase change
materials in the Soft-PGS, which makes it excellent TIM.
Features
● Thermal
resistance : 0.2K∙cm2/W (600 kPa)
To draw a good thermal resistance from sheet, pressure the Soft-PGS.
A close adherence would make the product fit into the uneven part and
enhance the performance.
● Thermal conductivity : X-Y direction 400W/m∙K, Z direction (28W/m∙K)
● Compressibility : 40 % (600k Pa)
● High and long term reliability : operating temperature range –55 to 400 °C
● RoHs compliant
After pressure
Recommended applications
For cooling/heat transfer of electronic devices that generates heat,
such as power modules.
● Inverters and converters
● Car-mounted camera, motor control unit, automotive LED,
luminous source of laser HUD, medical equipment
● Base station, Server
Install in IGBT module
IGBT module
Soft-PGS
Heatsink
Explanation of Part Numbers
● Soft-PGS(EYGS✽✽✽✽ZL✽✽)
1
2
3
4
5
6
7
8
9
10
11
12
E
Y
G
S
0
9
1
8
Z
L
X
2
Suffix
Product Code
PGS Graphite sheet
S
Style
PGS only
0909
0918
1818
Dimension
90 mm × 90 mm
90 mm × 180 mm
180 mm × 180 mm
Thickness of Soft-PGS
ZL
200 μm
✽ Please contact us for custom-made products.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2017
“Soft-PGS (Compressible Type)” PGS with low thermal resistance
Typical characteristics
Items
Test method
Condition
Data
Thermal resistance (K·cm2/W)
TIM Tester
600 kPa
Compressibility (%)
TIM Tester
600 kPa
40
X-Y
400 (300 to 600)
Thickness (µm)
200
Thermal conductivity (W/m·K)
Laser PIT
0.2
Z
(28)
Operating temperature range (°C)
−55 to 400
Typical values, not guaranteed.
Thermal resistance and compressibility
60
1.8
50
1.6
Compressibility (%)
Thermal resistance (K∙cm2/W)
2.0
1.4
1.2
1.0
0.8
0.6
0.4
40
30
20
10
0.2
0
0
100
200
300
400
Pressure (kPa)
500
600
0
0
100
200
300 400 500
Pressure (kPa)
600
700
Lamination type/Composition example
● Soft-PGS
(Compressible Type) standard form
Sheet only
Type
S Type
Process for IGBT mounting
−
b
Front
a
Structure
Side
Operating
Temperature Range
Thickness: c
Standard
Part No.
c
−55 to 400 °C
200 μm
90 × 90 mm
EYGS0909ZLX2
90 ×180 mm
EYGS0918ZLX2
180 ×180 mm
EYGS1818ZLX2
✽ Part numbers listed above are all standard samples for your consideration.
✽✽ Contact us for custom-made samples.
We can make samples in various forms and/or dimensions other than standard samples.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2017
“Soft-PGS (Compressible Type)” PGS with low thermal resistance
● PGS
in IGBT forms
Sheet only
S Type
Lamination
Type
Process for IGBT mounting
b
e
a d
Front
Structure
✽ This shape is an example, please
contact us for detailed shape of each
part no.
Side
c
Operating
Temperature Range
Thickness: c
No.
Standard
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
EYGS1431ZLAA
EYGS0925ZLWA
EYGS1419ZLWB
EYGS0917ZLWC
EYGS1316ZLAC
EYGS1216ZLWD
EYGS1116ZLMA
EYGS1315ZLGA
EYGS1314ZLWE
EYGS1014ZLAD
EYGS0714ZLAE
EYGS0714ZLAF
EYGS1113ZLMB
EYGS1313ZLGB
EYGS0713ZLAG
EYGS0813ZLMD
EYGS1212ZLGC
EYGS0912ZLGD
EYGS0612ZLWF
EYGS0512ZLGE
EYGS0811ZLGH
EYGS0811ZLWG
EYGS0611ZLWH
EYGS0411ZLWJ
EYGS0610ZLAH
EYGS0410ZLAJ
EYGS1010ZLME
−55 to 400 °C
200 µm
a : Lateral size
(mm)
140
85
136
85
125
120
108.8
129.5
126
97.8
70
69
106
128
66
71
120
88
60
53
80
78
60
43
59.4
43
98
b : Longitudinal
Hole
Hole
size
diameter
number
(mm)
(0mm)
308
12
6
246
14
6
186
8
7.5
168
10
6
163
8
6.1
160
8
6
158
8
6
150
8
7
136
6
7.5
138
4
6.8
138
4
5.7
136
4
7.2
132
4
5.7
128
4
6.7
126
4
5.7
123
2
4.7
120
4
5.7
120
4
5.7
120
4
5.7
118
2
5.7
113
4
5.7
108
4
6.7
106
4
6.7
105.5
2
5.7
104.4
4
6.7
102.8
2
5.7
98
4
6.7
d : Lateral
hole pitch
(mm)
126
73
124
73
110
110
92.75
118.5
114
86
57
57
95
110
50
Center
110
78
50
Center
70
62
48
Center
48
Center
87
e : Longitudinal
hole pitch
(mm)
290
234
171
156
150
150
144
137.5
124
127
128
124
121
110
116
116
110
110
110
106
103
93
93
93
93
93
87
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2017
“Soft-PGS (Compressible Type)” PGS with low thermal resistance
No.
Standard
Part No.
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
EYGS0409ZLGJ
EYGS0509ZLGK
EYGS0309ZLMF
EYGS0409ZLMG
EYGS0309ZLAK
EYGS0509ZLMH
EYGS0508ZLMJ
EYGS0608ZLMK
EYGS0607ZLGL
EYGS0507ZLML
EYGS0407ZLAL
EYGS0506ZLMM
EYGS0404ZLMP
EYGS1018ZLSA
EYGS1516ZLSB
EYGS1116ZLSC
EYGS0715ZLSD
EYGS0613ZLSE
EYGS0612ZLSF
EYGS0612ZLSG
EYGS1012ZLSH
EYGS0410ZLSJ
EYGS0609ZLSK
EYGS0606ZLSL
EYGS0305ZLSM
EYGS0204ZLSN
EYGS0303ZLSP
EYGS0911ZLDA
EYGS1014ZLDB
a : Lateral size
(mm)
44
46
32
41
29.5
51
46.2
55
58
45.3
40
48
36
104.5
148
112
67
61
63.3
61.5
104.5
43
61.5
58
27
24
29
92
98
b : Longitudinal
Hole
Hole
size
diameter
number
(mm)
(0mm)
93
2
6.7
92
2
6.7
92
2
6.7
88
2
5.7
89.5
2
6.6
86
2
4.7
83
2
4.7
78
2
4.5
69.7
4
5.7
66
2
4.7
65.5
1
7.7
55
1
4.5
38
1
4.5
182.5
8
7
158
8
5
158
8
5
153
4
5.6
127.5
4
5.6
124
4
5.6
124
4
5.6
121
4
6.7
103
2
5.7
91
4
5.6
61.5
2
5.6
51
1
4.6
36.5
1
4.6
32
1
4.5
109
4
6
138
4
6.7
d : Lateral
hole pitch
(mm)
Center
Center
Center
Center
Center
–
–
Center
50
–
Center
Center
Center
93
137
101
57
50
50
50
93
Center
50
44
Center
Center
Center
78
86
e : Longitudinal
hole pitch
(mm)
80
80
80
80
80
80
77
40
62
60
Center
Center
Center
171
150
150
143
116
110
110
109.5
93
77
50
Center
Center
Center
93
127
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2017
Similar pages