DRA3P Series • 2.4 & 4.2 Amp rated Solid State Contactor • Load voltage range of 48-510VAC, 3-Phase • Fits standard 35mm DIN-RAIL • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random turn-on (inductive loads) output • cUL Recognized, IEC Rated, CE & RoHS Compliant, Horsepower Rated • Built in Overvoltage Protection PRODUCT SELECTION Description 4-6 VDC Control 18-28 VDC Control 36-60 VAC Control 90-140 VAC Control 200-265 VAC Control 2.4A 4.2A DRA3P48D2 DRA3P48E2 DRA3P48C2 DRA3P48B2 DRA3P48A2 DRA3P48D4 DRA3P48E4 DRA3P48C4 DRA3P48B4 DRA3P48A4 2.4 A 4.2 A 48-510 1200 2.4/2.4 2.1/2.1 (4) 0.15 1.0 500 1.3 per Channel 285/300 410/375 0.5/0.37 (6) 1.0/0.75 (7) 1.0/0.75 (8) 0.5 24/10 0.5-4.0 12.0 in lb (1.36 Nm) 48-510 1200 4.2/2.4 3.4/2.1 0.15 1.0 500 1.3 per Channel 285/300 410/375 0.75/0.37 1.5/0.75 2.0/0.75 0.5 24/10 0.5-4.0 12.0 in lb (1.36 Nm) AVAILABLE OPTIONS OUTPUT SPECIFICATIONS AC Output (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] (2) Maximum Resistive Load Current UL/AC51 [Arms] (3) Maximum Motor Load Current UL/AC53 [Arms] (3) Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (5) Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] HP/IEC 60947 Rating @ 240V, 40°C [HP/KW] HP/IEC 60947 Rating @ 380V, 40°C [HP/KW] HP/IEC 60947 Rating @ 480V, 40°C [HP/KW] Minimum Power Factor (with Maximum Load) Min/Max stranded/solid wire [AWG] Min/Max stranded/solid wire [IEC mm²] Load Terminal Screw Torque Range: INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current [mA] Maximum Input Current [mA] Nominal Input Impedance [Ohms] Maximum Turn-On Time (9) Maximum Turn-Off Time Min/Max stranded/solid wire [AWG] Min/Max stranded/solid wire [IEC mm²] Control Terminal Screw Torque Range: DRA3P48Dx DRA3P48Ex GENERAL SPECIFICATIONS (1) Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Housing Material (bottom cover) Housing Material (end pieces) Parameters 3750Vrms 109 Ohms 20 pF -20ºC to 60ºC -40ºC to 85ºC 4.75 oz. (135g) PVC Class V0 (UL94) Polyamide Class V0 (UL94) GENERAL NOTES 1) Relay will self trigger between 900-1200V. Not Suitable for capacitive loads. 2) All parameters at 25°C unless otherwise specified. 3) Mounted in the Vertical position 4) For AC control AC53 maximum current is 1.6A 5) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 6) For AC control, rating is ½HP/0.25KW 7) For AC control, rating is1HP/0.37KW 8) For AC control, rating is 1HP/0.55KW 9) Turn-on time for DC control random turn-on versions is 0.1 msec. MECHANICAL SPECIFICATIONS DRA3P48Cx DRA3P48Bx DRA3P48Ax 4-6 VDC 18-28 VDC 36-60 VAC 90-140 VAC 200-265 VAC 4 VDC 18 VDC 36 VAC 90 VAC 200 VAC 2 VDC 4 VDC 10 VAC 20 VAC 100 VAC 17 15 7.5 5 4.5 35 25 13.5 8 5.7 120 1.2K 4.2K 16K 46K 1/2 Cycle 1/2 Cycle 20 ms 20 ms 20 ms 1/2 Cycle 1/2 Cycle 30 ms 30 ms 30 ms 24/12 24/12 24/12 24/12 24/12 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Rev 090512