Red Lion EB-10RTD-D Ethernet i/o module Datasheet

IN
INDDUUSTRI
STRIAAL LNNETWO
ETWORK
RKI N
I NGGSO
SOLUTI
LUTION
ONSS
D ATA S H E E T
EtherTRAK -2 Ethernet
I/O Modules
EtherTRAK®-2
Ethernet I/O Module
D ATA S H E E T
®
Sixnet Automation Series
D ATA S H E E T
Industrial
Automation
EtherTRAK®-2
Ethernet
EtherTRAK®-2
EthernetI/O
I/OModule
Module
Ethernet I/O Modules
Industrial
IndustrialAutomation
Automation
PRODUCT HIGHLIGHTS
Flexible
mixHIGHLIGHTS
of
I/O channels support
• PRODUCT
PRODUCT
HIGHLIGHTS
all instrumentation needs
Flexiblemix
mixofofI/O
I/Ochannels
channelssupport
support
••allFlexible
Ring™ for fast
redundancy
needs
allinstrumentation
instrumentation
needs
• Real-Time
independent
Ethernet
ports
Ring™
for
Real-Time
Ring™
forfast
fastredundancy
redundancy
• •Dual
•Real-Time
enable
flexible
networking
Dual
independent
Ethernet
Dual independent Ethernetports
ports
•Built-in
•enable
flexible
networking
security
proactively
enable
flexible
networkingblocks
• unwanted
access proactively blocks
Built-insecurity
security proactively blocks
••Built-in
unwanted
access
health
diagnostics and
unwanted
access
• Extensive
reporting
reduce
Extensive
health
diagnostics
Extensive
health
diagnosticsand
and
••reporting reducedowntime
downtime
reporting
reduce
downtime
Standard
Modbus
protocols
provide
• universal
compatibility
Modbus
Standard
Modbusprotocols
protocolsprovide
provide
••Standard
universal
compatibility
universal
compatibility
design supports extreme
• Rugged
andsupports
hazardous
Ruggeddesign
design
supportsextreme
extreme
•temperatures
•Rugged
temperatures
locations
temperaturesand
andhazardous
hazardous
Sixnet’s EtherTRAK®-2 Ethernet I/O modules provide a simple and secure way to reliably monitor
remote sites located in harsh environments. Offering the lowest cost per I/O point and rugged
Sixnet’s
Ethernet
a asimple
and
secure
way
reliably
monitor
Sixnet’sEtherTRAK®-2
EtherTRAK®-2
EthernetI/O
I/Omodules
modulesprovide
provide
simple
and
secure
waytoto
reliably
monitor
environmental
ratings, EtherTRAK-2
modules
are
ideal
for
both
control
rooms
and
extreme
locations
remote
sites
Offering
the
point
remote
siteslocated
located
inharsh
harshenvironments.
environments.
Offering
thelowest
lowestcost
costper
perI/O
I/O
pointand
andrugged
rugged
across
industries
thatininclude
oil
& gas, power
& energy,
transportation,
mining,
maritime
and water/
environmental
environmentalratings,
ratings,EtherTRAK-2
EtherTRAK-2modules
modulesare
areideal
idealfor
forboth
bothcontrol
controlrooms
roomsand
andextreme
extremelocations
locations
wastewater.
across
industries
that
include
oil
&
gas,
power
&
energy,
transportation,
mining,
maritime
across industries that include oil & gas, power & energy, transportation, mining, maritimeand
andwater/
water/
Our
compact DIN-rail modules support open-standard protocols to provide flexible communication
wastewater.
wastewater.
options for existing or newly installed Ethernet networks. By seamlessly replacing external devices such
Our compact
DIN-rail
modules
open-standard
protocols totoprovide
flexible
communication
compact
DIN-rail
modulessupport
support
open-standard
provide
flexible
communication
asOur
switches,
data
concentrators
and
protocol
converters,protocols
EtherTRAK-2
modules
transcend
simple I/O
options
for
existing
or
newly
installed
Ethernet
networks.
By
seamlessly
replacing
external
devices
options
for
existing
or
newly
installed
Ethernet
networks.
By
seamlessly
replacing
external
devicessuch
such
capabilities to cost-effectively streamline systems and improve reliability.
asasswitches,
switches,data
dataconcentrators
concentratorsand
andprotocol
protocolconverters,
converters,EtherTRAK-2
EtherTRAK-2modules
modulestranscend
transcendsimple
simpleI/O
I/O
capabilities
capabilitiestotocost-effectively
cost-effectivelystreamline
streamlinesystems
systemsand
andimprove
improvereliability.
reliability.
Control
Center
Control
Control
Center
Center
IPm
Controller
IPm
IPm
Controller
Controller
Ring
Switch
Ring
Ring
Switch
Switch
Real-Time
Ring
Real-Time
Real-Time
Ring
Ring
locations
locations
APPLICATIONS
APPLICATIONS
APPLICATIONS
Oil & Gas
• • OilOil&&Gas
Gas
• & Energy
• •-Power
Power
&
Power &Energy
Energy
•Transmission
- -Transmission
Transmission
- Distribution
- -Distribution
Distribution
Transportation
Transportation
Transportation
Mining
Mining
Mining
Maritime
Maritime
Maritime
Water/Wastewater
Water/Wastewater
Water/Wastewater
• ••
• ••
• ••
• ••
F L FL
EFXIBLE.
ABLE.
AABBLE
PPOW
LEEXXI BI BL LE.RELI
E.RELI
RELI
L EP. .OWE
OWERERFU
RF FULUL. L. .
Service
Room
Service
Service
Room
Room
IPm
Controller
IPm
IPm
Controller
Controller
Ring
Switch
Ring
Ring
Switch
Switch
EtherTRAK-2
EtherTRAK-2
I/O
Modules
EtherTRAK-2
I/O
I/OModules
Modules
EtherTRAK-2
EtherTRAK-2
I/O Modules
EtherTRAK-2
I/O
I/OModules
Modules
Pump
Pump
Pump
Room
Room
Room
Engine
Engine
Engine
Room
Room
Room
Off-Shore
OilRig
Rig
Off-Shore
Off-ShoreOil
Oil
Rig
EtherTRAK-2
Ethernet
I/O Module
EtherTRAK®-2 Ethernet
I/O Module
Specifications
Industrial Automation
INDUSTRIAL AUTOMATION
FEATURES & BENEFITS
Sixnet’s rugged RTUs and I/O
provide a simple yet powerful
means to reliably monitor and
control remote sites around the
clock in the harshest environments.
Our compact automation systems
can start small and grow as needs
increase without requiring hardware
replacement. Virtually unlimited
scalability means organizations have
fewer restrictions on the number
of remote sites or devices that are
supported. “Best of both worlds”
programming combines Windows
ease of use with the future-proof
security of an embedded Linux OS.
High-Performance, Flexible I/O
Configuration Maintenance & Monitoring
• Provides high-speed functionality
• Lowers overall cost per I/O point
– Flexible mix of up to 34 I/O supports
DI, DO, AI, AO, temperature (RTD and
thermocouples)
– High resolution 16-bit analog or high-speed
10-bit analog
– Fast I/O polling of up to 1mS
– Advanced counter functions with 32-bit
reporting
– Time proportioned outputs simplify highspeed pulse rate functions
• Delivers cross-platform configuration
• Offers easy-to-use software tools
– Configuration and monitoring via standard
web browser
– On-board storage for project
documentation
– Project-based software tools
– User-based history tracks changes
– Per-channel calibration
– Configuration archiving
– Module hot-swap capabilities
Built-In Security
• Prevents unwanted intrusion
• Guards against unauthorized users
– User-assigned permissions
– Firewall protection
Flexible, Redundant Networking
• Simplifies connectivity by replacing Ethernet
switches
• Ensures reliability without additional cost
– Real-Time Ring switch mode for fast
redundancy
– Switch elimination mode enables daisychaining
– Dual independent Ethernet ports
– Ethernet, RS-485 and USB connections
– Optional Power over Ethernet (PoE)
– Embedded data concentrator
Rugged, Compact Design
• Supports harsh environments
• Delivers proven reliability
– Industrial -40 to 75°C operating range
– UL/CSA (CUL), FCC and CE rated
– Hazardous locations rated for Class I,
Div 2 (Zone 2) areas
– Vibration resistant IEC60068-2-6
– Self-resetting fuses protect I/O
Watchdog Monitoring & Reporting
• Provides health reports of various module
functions
• Reduces maintenance downtime
– CPU health
– Dual-power status
– Communication activity
– PoE status
– Port link status
NETWORKING OPTIONS
Break in Cable
Active Data Path
Real-Time Ring Switch Mode
Create redundant Ethernet reliability
without additional cost
Backup Data Path
Switch Elimination Mode
Daisy-chain modules without external
switches to save money and simplify
connectivity
LAN A LAN B
Two Networks Mode
Each Ethernet port has a unique MAC
and IP address for connection to two
independent physical networks
FLEX
XII B L E . R E L I A B L E.
E . POWERF
POWE RF U L.
EtherTRAK®-2 Ethernet I/O Module Specifications
SPECIFICATIONS
General I/O Performance
•
•
•
•
•
Power supply voltage: 10-30 VDC
Input current requirement: 100 mA @ 24 VDC typical with no loads
PoE power (EB modules only): 10 watts at 60°C for user loads
De-rate: up to 5 watts at 75°C
I/O: 512 discrete inputs and outputs plus 256 analog input and
output registers
• Unique station addresses: 16,000+ (Sixnet or 247 Modbus)
Discrete Input Channels
•
•
•
•
•
•
•
•
Voltage range: 10–30 VDC or 60–140 VAC
Input isolation: 150 volts (16 channel modules only)
Input resistance: 10 Kohms
Slow response (software configurable): 25 mS (20 Hz. maximum
counting rate)
Fastest response (software configurable): 1 mS (400 Hz. maximum
counting rate)
Special fast counting rate: up to 50 KHz on channels 1 and 2
Count up: pulse timing and pulse rate 16 or 32-bit reporting
Refer to user manual for additional specifications
Ethernet Performance
Discrete Output Channels
•
•
•
•
•
•
•
•
•
•
•
•
Ethernet ports: 10/100BaseTx (auto-detecting)
Connection: RJ45 (auto-crossover)
Isolation: 1500 volts RMS 1 minute (60 Hz.)
Message response time: <1 mS per message
Diagnostic LEDs: solid indicates link, blinking indicates activity
Protocol support: TCP/IP, ARP, UDP, ICMP, DHCP, HTTP, Modbus
UDP/TCP slave mode, Modbus UDP master mode, Sixnet UDR UDP/
TCP slave mode, Sixnet UDR UDP master mode
• Real-Time Ring: 5ms per hop recovery time
• Independent networks: 1 or 2 with unique MAC and IP addres
Serial Ports
Output voltage range: 10-30 VDC or 10-30VDC/AC
Maximum output power: up to 1A per channel
Short circuit protection: self-reset fuses (trip above 1.5 Amp)
Input isolation: 150 volts (16 channel modules only)
All channels scan rate: 1 mS
Refer to user manual for additional specifications
Web Interface
• Secure web access with password protection for multiple users
• 1 simultaneous user
• 750K memory for user pages (more with special order)
• RS-485 port: screw terminals (485+, 485-, GND; 2-wire halfduplex, not isolated)
• RS-485 networking: up to 32 (full load) stations
• RS-485 distance: up to 0.5 miles (baud-rate dependent)
• Baud rates: from 300 to 57,600 baud
• Protocols: master and slave; Sixnet and Modbus RTU/ASCII
• Diagnostic LEDs: transmit (TD) and receive (RD)
Environmental
Analog Output Channels
Standards Compliance
•
•
•
•
•
•
•
• Electrical safety : UL 508, CSA C22.2/142; EN61010-1; CE
• EMI emissions: FCC part 15, ICES-003, Class A; EN55022;
IEC6100-6-4; CE
• EMC immunity : IEC61000-6-2 (EN61000-4-2,3,4, 5, 6, 8); CE
• Hazardous locations: Class 1, Div 2, Groups A, B, C, D; ISA12.12.01;
CSA C22.2/213; ATEX (Zone 2) IEC60079-0,-15
• Marine and offshore: tested and/or verified to meet various
standards such as ABS, DNV No. 2.4, and Lloyds
Analog output range: 4-20 mA
D/A resolution: 16 bits (less than 1 uA)
Full scale accuracy: +/-0.02% (at 20°C)
Span and offset temperature: +/- 50 ppm per °C
Load resistance (@ 24 V): 0-750 Ohms
Current limiting short circuit protection
Refer to user manual for additional specifications
Analog Input Channels
•
•
•
•
•
•
•
•
•
•
•
•
Input range: 4-20mA, 0-10VDC, RTD, thermocouple and 250mV
A/D resolution: 16 bits (0.003%); 10 bits (1mS fast option)
Input impedance (resistance): 100 ohms or 200 Kohms
Fuses: self-resetting short circuit protection (4-20 mA inputs)
DMRR (differential mode): 66 db at 50/60 Hz
Update time: from 880 mS to 1 mS (depending configuration)
Temperature accuracy: typical uncalibrated +/-0.5°C
RTD type: 100 Ohm platinum
RTD alpha: 0.00385 or 0.00392
RTD connections: 2 or 3-wire
RTD input range: -200 to 850°C
Refer to user manual for additional specifications
• Operating temperature: -40 to 75°C (-40 to 85°C storage)
• Humidity: 5 to 95% RH (non-condensing; optional conformal
coating)
• Flammability: UL 94V-0 materials
• Vibration: IEC60068-2-6
• Shock: IEC60068-2-27
Physical
• Mounting: DIN rail (EN50022), direct to panel or flat panel
• Packaging: impact resistant Lexan® polycarbonate
• Dimensions (module and base): 5.5”L x 3.5”W x 5.1”H (14cm x
8.9cm x 13cm)
Warranty
• 2 years on design and manufacturing defects
All specifications are subject to change. Contact Sixnet to learn more.
Industrial Automation
Industrial Automation
EtherTRAK®-2 Ethernet I/O Module Specifications
ORDER GUIDE
ORDER GUIDE
PART NUMBER
PART NUMBER
E2 or EB-MIX24880-D
E2 or EB-MIX24880-D
E2 or EB-MIX24882-D
E2 or EB-MIX24882-D
E2-MIX20884-D
E2-MIX20884-D
DI
DI
24
24
24
24
20
20
E2 or EB-32DI24-D
E2 or EB-32DI24-D
E2 or EB-16DI24-D
E2 or EB-16DI24-D
E2-16DIAC-D
E2-16DIAC-D
32
32
16
16
16
16
DO
DO
8
8
8
8
8
8
E2 or EB-32DO24-D
E2 or EB-32DO24-D
E2 or EB-16DO24-D
E2 or EB-16DO24-D
32
32
16
16
E2-16DORLY
E2-16DORLY
16
16
AI
AI
8
8
8
8
8
8
E2 or EB-32AI20M-D
E2 or EB-32AI20M-D
E2 or EB-32AI10V-D
E2 or EB-32AI10V-D
E2 or EB-16AI20M-D
E2 or EB-16AI20M-D
E2 or EB-8AO20M-D
E2 or EB-8AO20M-D
32
32
32
32
16
16
E2 or EB-16AI-8AO-D
E2 or EB-16AI-8AO-D
16
16
E2 or EB-16ISOTC-D
E2 or EB-16ISOTC-D
E2or
orEB-16ISO20M-D
EB-16ISO20M-D
E2
E2 or
orEB-10RTD-D
EB-10RTD-D
E2
AO
DESCRIPTION
AO
DESCRIPTION
32 channel combination I/O with 1 isolated input counter
32 channel combination I/O with 1 isolated input counter
2
34 channel combination I/O with 2 analog outputs
2
34 channel combination I/O with 2 analog outputs
4
32 channel combination I/O with 4 analog outputs and 4 isolated
4
32input
channel
combination I/O with 4 analog outputs and 4 isolated
counters
8
16TC
16TC
1616
10RTD
10RTD
8
8
8
input counters
32 discrete inputs (10-30 VDC) including 16 multifunction counters
32 discrete inputs (10-30 VDC) including 16 multifunction counters
16 individually isolated discrete inputs (10-30 VDC) with counters
16 individually isolated discrete inputs (10-30 VDC) with counters
16 individually isolated discrete inputs (120 VAC nominal; 10-30
16 individually isolated discrete inputs (120 VAC nominal; 10-30
VDC) with counters
VDC) with counters
32 discrete outputs (10-30 VDC) 0.5 Amp each, 8 Amps total
32 discrete outputs (10-30 VDC) 0.5 Amp each, 8 Amps total
16 individually isolated discrete ouputs (10-30VDC) 1 Amp outputs,
16 individually isolated discrete ouputs (10-30VDC) 1 Amp outputs,
16 Amps total
16 Amps total
16 individually isolated discrete outputs (10-30VDC/VAC relay) 1
16 individually isolated discrete outputs (10-30VDC/VAC relay) 1
Amp outputs, 16 Amps total
Amp outputs, 16 Amps total
32 analog inputs (4-20 mA) with 16-bit accuracy
32 analog inputs (4-20 mA) with 16-bit accuracy
32 analog inputs (0-10VDC)
32 analog inputs (0-10VDC)
16 analog inputs (4-20 mA)
16 analog inputs (4-20 mA)
8 analog outputs (4-20 mA)
8 analog outputs (4-20 mA)
24 channel combination, 16 analog inputs (4-20 mA) and 8 analog
24 channel combination, 16 analog inputs (4-20 mA) and 8 analog
outputs (4-20 mA)
outputs (4-20 mA)
16 individually isolated analog inputs (thermocouple and
16 individually isolated analog inputs (thermocouple and
+/- 250 mV) with J, K, E, R, T, C, N, S
+/- 250 mV) with J, K, E, R, T, C, N, S
ABOUT SIXNET
ABOUT
SIXNET
Celebrating
35 years in operation,
Celebrating
35 years
in operation,
Sixnet provides
innovative
machin
Sixnet
provides(M2M)
innovative
machineto-machine
connectivity
to-machine
(M2M)
connectivity
to industrial
customers
and
to markets
industrialworldwide.
customersSixnet’s
and
flexibl
markets
worldwide.
Sixnet’s flexible
solutions
enable organizations
to
solutions
enable organizations
to
cost-effectively
increase business
cost-effectively
increase
business
productivity. By
integrating
powerf
productivity.
By
integrating
powerful
enterprise-class networking
with
enterprise-class
networking
with the
rugged reliability,
Sixnet meets
rugged
reliability,
Sixnet
the
standards
of the
mostmeets
demanding
standards
of applications
the most demanding
industrial
in industries
industrial
in industries
such asapplications
power & energy,
banking
such
as
power
&
energy,
& retail, transportation,banking
video &
& retail,
transportation,
videomobile
&
security,
utilities, military,
security,
utilities,
military,
mobile
data, maritime and more. Based in
data,
maritime
Based in ha
Ballston
Lake,and
NY,more.
the company
Ballston
Lake,
NY,
the
company
offices across North America,has
Asia
offices across North America, Asia
and Europe.
and Europe.
more
information,
ForFor
more
information,
visit
www.sixnet.com,
visit
www.sixnet.com,
email
[email protected]
email [email protected]
or or
call
518
877
5173
call
+1+1
518
877
5173
individually
isolated
analgo
inputs
(4-20
mA)
1616
individually
isolated
analgo
inputs
(4-20
mA)
analog
inputs
(100
Ohm
platinum
RTD),
rang
is -200
to 850°C
1010
analog
inputs
(100
Ohm
platinum
RTD),
rang
is -200
to 850°C
MECHANICALDRAWING
DRAWING
MECHANICAL
As the global experts in communication, monitoring and control for
industrial automation and networking, Red Lion has been delivering
innovative solutions for over forty years. Our award-winning
Asia-Pacific
technology enables companies worldwide to gain real-time data
FLEXI
B LE.LE.
RE
LIA
LE.
ERFEUL.
[email protected]
F LEXIB
R
E LBI A
BL POW
ELion,
. P OW
RFU
visibility that drives productivity. Product
brands
include
Red
Sixnet,
Sixnet,LLC
LLCCorporate
CorporateHeadquarters
Headquarters
N-Tron
and
Sixnet.
With
headquarters
in
York,
Pennsylvania,
the
TT
+1 +1
518518
877
5173
877877
8346
331
NY
12019
Europe
© 2011 Sixnet. All Rights Reserved. DEC2013
877
5173 F +1
F 518
+1 518
8346
331Ushers
UshersRoad,
Road,Ballston
BallstonLake,
Lake,
NY
12019
© 2011 Sixnet. All Rights Reserved. DEC2013
company has offices across the Americas, Asia-Pacific
and Europe.
Middle East
For
more
information,
please
visit
www.redlion.net.
Red Lion is a
Africa
w w w. re d l i o n . n e t
Spectris company.
[email protected]
Connect. Monitor. Control.
ADLD0181 122313 © 2013 Red Lion Controls
+1 (717) 767-6511
Americas
[email protected]
Similar pages