Suntan Su ® ® ABS1 THRU ABS10 SURFACE MOUNT FAST SWITCHING RECTIFIER REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere ABS FEATU RE S ◆Glass passivated chip junction. ◆Ideal for surface mounted applications. ◆Low leakage. ◆High forward surge current capability. ◆High temperature soldering guaranteed: 260℃/10 seconds at terminals. Mechanical Data ◆Case: Molded plastic body. ◆Epoxy: UL94V-0 rate flame retardant. ◆Polarity: Molded on body. ◆Lead: Plated terminals solderable per MIL-STD-202E method 208C. ◆Weight: 0.003 ounce, 0.1 gram. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL ABS1 ABS2 ABS3 ABS4 ABS6 ABS8 PARAMETER ABS10 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current, 0.06”(1.5mm) lead length at TL=90℃ (Note 2) Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 1.0A VDC 50 100 200 400 600 800 1000 V I(AV) 1.0 A IFSM 30 A I2 t 10 A2s VF 1.1 V Maximum DC Reverse Current at TA=25℃ at Rated DC Blocking voltage TA=125℃ 5 0.5 µA IR mA Typical Junction Capacitance (Note 1) CJ 25 pF RθJC 40 ℃/W TJ , TSTG -55 to +150 ℃ Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2. Unit mounted on P.C.B. with5.72mm×7.22mm copper pads. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan Su ® ® ABS1 THRU ABS10 SURFACE MOUNT FAST SWITCHING RECTIFIER REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere RATING AND CHARACTERISTIC CURVES ABS1 THRU ABS10 Note: Specifications are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246