Kingbright APKA2810SECK-F01 2.8x1.0mm right angle smd chip led lamp Datasheet

2.8X1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
Part Number: APKA2810SECK-F01
Super Bright Orange
Features
Description
z 2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm
The Super Bright Orange device is made with DH InGaAlP
THICKNESS.
(on GaAs substrate) light emitting diode chip.
z LOW POWER CONSUMPTION.
z IDEAL FOR BACKLIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(±0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF1351
REV NO: V.4
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/08/2007
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1204000237
Selection Guide
Part No.
Dice
APKA2810SECK-F01
Lens Type
Super Bright Orange (InGaAlP)
WATER CLEAR
Viewing
Angle [1]
Iv (mcd) [2]
@ 20mA
Min.
Typ.
2θ1/2
70
250
90°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Orange
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
610
nm
IF=20mA
Super Bright Orange
601
nm
IF=20mA
Spectral Line Half-width
Super Bright Orange
29
nm
IF=20mA
C
Capacitance
Super Bright Orange
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Orange
2.1
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Orange
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Orange
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
195
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF1351
REV NO: V.4
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/08/2007
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1204000237
Super Bright Orange
APKA2810SECK-F01
SPEC NO: DSAF1351
REV NO: V.4
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/08/2007
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1204000237
APKA2810SECK-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAF1351
REV NO: V.4
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/08/2007
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1204000237
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAF1351
REV NO: V.4
APPROVED: WYNEC
CHECKED: Allen Liu
APKA2810SECK-F01
DATE: MAY/08/2007
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1204000237
Similar pages