Effciency Fast Rectifiers Formosa MS EF10A05 THRU EF10A60 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Tube packing.................................................................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date Revision DS-222506 2008/02/10 2015/07/06 D Page. 6 Effciency Fast Rectifiers Formosa MS EF10A05 THRU EF10A60 10.0A Glass Passivated Effciency Fast Rectifiers-50-600V Features • Reverse recovery time less than 25ns • High current capability. • Low reverse leakage current . • High surge capability. • Glass passivated chip junction. • Low forward drop down voltage. • High reliability. • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen-free parts, ex. ΕF10A05-H. Package outline TO-220AC 0.419(10.66) 0.387(9.85) 0.196(5.00) 0.163(4.16) 0.054(1.39) 0.045(1.15) 0.269(6.85) 0.226(5.75) 0.624(15.87) 0.548(13.93) 0.139(3.55) MIN Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : JEDEC TO-220AC molded plastic body over 0.177(4.50)MAX 0.038(0.96) 0.019(0.50) passivated chip 0.50(12.70)MIN • Lead : Axial leads, solderable per MIL-STD-202, Method 208 guranteed 0.1(2.54) • Polarity: As marked • Mounting Position : Any • Weight : Approximated 2.05 gram .025(0.65)MAX Dimensions in inches and (millimeters) Maximum ratings (AT o T A=25 C unless otherwise noted) SYMBOLS EF10A05 EF10A10 EF10A20 EF10A40 EF10A60 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC blocking voltage VDC 50 100 200 400 600 V PARAMETER Maximum average forward rectified current IO 10.0 A Peak forward surge current 8.3ms single half sine-wave(JEDEC method) IFSM 100 A Typical diode junction capacitance (Note 1) CJ 60 pF Operating junction temperature range TJ -55 to +150 °C Storage temperature range TSTG -65 to +175 °C Electrical characteristics (AT o T A=25 C unless otherwise noted) SYMBOLS PARAMETER EF10A05 EF10A10 EF10A20 EF10A40 EF10A60 UNIT 1.30 1.75 V Maximum forward voltage at IF=10.0A VF Maximum DC reverse current at rated DC blocking voltage IR 5.0 250 uA uA trr 25 ns at TJ =25 ° C at TJ =125 ° C Maximum reverse recovery time (Note 2) 0.98 Thermal characteristics PARAMETER Typical thermal resistance junction to case SYMBOLS EF10A05 RθJC EF10A10 EF10A20 EF10A40 EF10A60 UNIT °C/W 1.5 Note 1: Measure at 1 MHz and applied reverse voltage of 4.0 V D.C. Note 2: Reverse recovery time test condition, IF=0.5A, IR=1.0A, IRR=0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 2 Document ID Issued Date Revised Date Revision DS-222506 2008/02/10 2015/07/06 D Page. 6 Rating and characteristic curves (EF10A05 THRU EF10A60) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.3-TYPICAL FORWARD AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 40 INSTANTANEOUS FORWARD CURRENT,(A) 12.0 10.0 8.0 6.0 4.0 2.0 0 0 20 40 60 80 100 120 140 160 180 200 CASE TEMPERATURE,TC( C) 50 - 200V 400V 10 600V 1 T J= 25°C .1 FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) PEAK FORWARD SURGE CURRENT,(A) 100 8.3ms Single Half 80 Sine Wave JEDEC method 60 40 20 FIG.4 - TYPICAL REVERSE 0 CHARACTERISTICS 1 5 50 10 100 1000 REVERSE LEAKAGE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz FIG.5- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS trr 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) 0 PULSE GENERATOR -0.25A (NOTE 2) (+) 25Vdc (approx.) D.U.T. ( ) 1W NONINDUCTIVE | | | | | | | | +0.5A 2. Rise Time= 10ns max., Source Impedance= 50 ohms. TJ=125°C 10 TJ=25°C 1 0.1 (+) OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date Revision DS-222506 2008/02/10 2015/07/06 D Page. 6 Effciency Fast Rectifiers Formosa MS EF10A05 THRU EF10A60 Pinning information Pin Pin1 Pin2 Simplified outline cathode anode 1 Symbol PIN1 2 CASE PIN2 Marking Type number Marking code EF10A05 EF10A10 EF10A20 EF10A40 EF10A60 EF10A05 EF10A10 EF10A20 EF10A40 EF10A60 Tube packing PACKAGE TO-220AC TUBE (pcs) 50 TUBE SIZE (m/m) 525*32*7.5 BOX (pcs) INNER BOX (m/m) 1000 555*150*40 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 CARTON SIZE (m/m) 580*230*175 Page 4 CARTON (pcs) 5,000 APPROX. GROSS WEIGHT (kg) 15.0 Document ID Issued Date Revised Date Revision DS-222506 2008/02/10 2015/07/06 D Page. 6 Effciency Fast Rectifiers Formosa MS EF10A05 THRU EF10A60 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date Revision DS-222506 2008/02/10 2015/07/06 D Page. 6 Effciency Fast Rectifiers Formosa MS EF10A05 THRU EF10A60 High reliability test capabilities Item Test Conditions Reference O MIL-STD-750D METHOD-2031 O MIL-STD-202F METHOD-208 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16" ± 1/32" 2. Solderability at 245 ± 5 C for 5 sec. 3. High Temperature Reverse Bias V R=80% rate at T J=150 C for 168 hrs. 4. Forward Operation Life Rated average rectifier current at T A=25 C for 500hrs. MIL-STD-750D METHOD-1038 O MIL-STD-750D METHOD-1027 O O 5. Intermittent Operation Life 6. Pressure Cooker T A = 25 C, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 O 15P SIG at T A=121 C for 4 hrs. O MIL-STD-750D METHOD-1051 O 7. Temperature Cycling -55 C to +125 C dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Forward Surge 8.3ms single half sine-wave , one surge. 9. Humidity at T A=85 C , RH=85% for 1000hrs. 10. High Temperature Storage Life at 175 C for 1000 hrs. MIL-STD-750D METHOD-4066-2 MIL-STD-750D METHOD-1021 O http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 MIL-STD-750D METHOD-1031 O Page 6 Document ID Issued Date Revised Date Revision DS-222506 2008/02/10 2015/07/06 D Page. 6