Powerex Power CD631015C Dual scr isolated module Datasheet

®
CD63__15C
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
http://www.pwrx.com
POW-R-BLOK
Dual SCR Isolated Module
150 Amperes / 800 to 1800 Volts
TM
Description:
Powerex Dual SCR Modules are
designed for use in applications
requiring phase control and isolated
packaging. The modules are isolated
for easy mounting with other
components on a common heatsink.
Features:
 Electrically Isolated Heatsinking
 Compression bonded construction
 Low Thermal Impedance
for Improved Current Capability
 Quick Connect Gate Terminal
with Provision for Keyed Mating
Plug
 RoHS Compliant
 UL Recognized (E78240)
Benefits:
 No Additional Insulation
Components Required
 Easy Installation
 No Clamping Components
Required
 Reduce Engineering Time
Applications:








Outline Dimensions
Bridge Circuits
AC & DC Motor Drives
Battery Supplies
Power Supplies
Large IGBT Circuit Front Ends
Lighting Control
Heat & Temperature Control
Welders
Ordering Information:
Dimension
Inches
Millimeters
A
3.70
94
B
1.34
34
C
1.15
29.2
D
3.15
80
E
0.94
24
F
0.91
23
G
0.51
13
H
0.35
9
J
M6
M6
K
0.24
6.2
M
0.19
4.9
R
0.03 X 0.11
2.8 X 0.8
Note: Dimensions are for reference only.
Select the complete nine digit module
part number from the table below.
Example: CD631615C is a 1600Volt,
150 Ampere Dual SCR Isolated
TM
POW-R-BLOK Module
Type
CD63
Voltage Current
Volts Amperes
(x100)
08
10
12
14
16
18
15
(150 A)
Version
C
Revision Date: 04/11/2012
®
CD63__15C
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
http://www.pwrx.com
POW-R-BLOK
Dual SCR Isolated Module
150 Amperes / 800 to 1800 Volts
TM
Absolute Maximum Ratings
Characteristics
Conditions
Symbol
Units
Repetitive Peak Forward and Reverse Blocking
Voltage
VDRM & VRRM
800 to 1800
V
Non-Repetitive Peak Reverse Blocking Voltage
(t < 5 msec)
VRSM
VRRM + 100
V
RMS Forward Current
180° Conduction, TC=86°C
IT(RMS)
235
A
Average Forward Current
180° Conduction, TC=86°C
IT(AV)
150
A
Peak One Cycle Surge Current, Non-Repetitive
50 Hz, 60% VRRM reapplied, Tj=125°C
ITSM
5400
A
I2t for Fusing for One Cycle
50 Hz, 60% VRRM reapplied, Tj=125°C
I2t
149,000
A2 sec
Tj=125°C,
ITM=320A , IG=1.5 A,
Tr < 0.5µs
di/dt
100
A/µs
Operating Temperature
TJ
-40 to +125
°C
Storage Temperature
Tstg
-40 to +125
°C
53
6
53
6
320
0.71
in.-Lb.
Nm
in.-Lb.
Nm
g
lb
2500
V
Maximum Rate-of-Rise of On-State Current,
Repetitive
Max. Mounting Torque, M6 Mounting Screw on
Terminals
Max. Mounting Torque, Module to Heatsink
Module Weight, Typical
V Isolation @ 25C
Tj= 25°C, 1 minute
Vrms
Information presented is based upon manufacturers testing and projected capabilities.
This information is subject to change without notice.
The manufacturer makes no claim as to the suitability of use, reliability, capability,
or future availability of this product.
Revision Date: 04/11/2012
®
CD63__15C
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
http://www.pwrx.com
POW-R-BLOK
Dual SCR Isolated Module
150 Amperes / 800 to 1800 Volts
TM
Electrical Characteristics, TJ=25°C unless otherwise specified
Characteristics
Repetitive Peak Forward Leakage Current
Repetitive Peak Reverse Leakage Current
Symbol
Test Conditions
IDRM
At VDRM, TJ=125°C
Min.
Max.
Units
25
mA
IRRM
At VRRM, TJ=125°C
25
mA
VTM / VFM
ITM / IFM =480A
1.60
V
Threshold Voltage, Low-level
Slope Resistance, Low-level
V(TO)1
rT1
TJ = 125°C, I = 16.7% x IT(AV) to IT(AV)
0.8
1.69
V
m
Minimum dV/dt
dV/dt
Exponential to 2/3 VDRM
Tj=125°C, Gate Open
Gate Trigger Current
IGT
Tj= 25°C, VD=12V, IA= 1A
150
mA
Gate Trigger Voltage
VGT
Tj= 25°C, VD=12V, IA= 1A
2.5
Volts
Non-Triggering Gate Voltage
VGDM
Tj=125°C, VD=VDRM
1.0
Volts
Non-Triggering Gate Current
IGDM
Tj=125°C, VD=VDRM
30
mA
IH
TJ=25°C
(Typical)
mA
Peak On-State Voltage
Holding Current
800
150
V/µs
Thermal Characteristics
Characteristics
Thermal Resistance, Junction to Case
DC Operation
Thermal Resistance, Case to Sink Lubricated
Symbol
Max.
Units
RΘJ-C
Per Junction, both conducting
0.17
°C/W
RΘC-S
Per Module
0.08
°C/W
Revision Date: 04/11/2012
®
CD63__15C
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
http://www.pwrx.com
POW-R-BLOK
Dual SCR Isolated Module
150 Amperes / 800 to 1800 Volts
TM
Maximum On-State Forward Voltage Drop
Maximum Transient Thermal Impedance
(Junction to Case)
( Tj = 125 C )
0.18
5
Thermal Impedance - Rjc - °C/W
On-State Voltage - Vtm - Volts
0.16
4
3
2
0.14
0.12
0.1
0.08
0.06
0.04
1
0.02
0
10
100
1000
0
0.0001
10000
0.001
0.01
Instantaneous On-State Current - Itm - Amperes
0.1
1
10
100
Time - t - Seconds
Maximum Allowable Case Temperature
Maximum On-State Power Dissipation
(Sinusoidal Waveform)
(Sinusoidal Waveform)
180°
120°
200
90°
60°
30°
150
15°
100
50
120
Max. Case Temperature - Tcase - °C
Maximum Power Dissipation Per SCR - Watts
250
0
110
15°
100
30°
60°
90
120°
180°
80
70
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
Average On-State Current - It(av) - Amperes
Average On-State Current - It(av) - Amperes
Maximum On-State Power Dissipation
Maximum Allowable Case Temperature
(Rectangular Waveform)
140
160
(Rectangular Waveform)
300
360°
120
270°
250
Max. Case Temperature - Tcase - °C
Maximum Power Dissipation Per SCR - Watts
90°
180°
120°
90°
200
60°
30°
150
15°
100
50
110
100
90
30°
80
60°
90°
120°
180°
15°
270°
360°(DC)
70
60
0
0
50
100
150
Average On-State Current - It(av) - Amperes
200
250
0
50
100
150
200
250
Average On-State Current - It(av) - Amperes
Revision Date: 04/11/2012
Similar pages