NAIS AQW215 Gu (general use) type [2-channel (form a) type] Datasheet

GU (General Use) Type
[2-Channel (Form A) Type]
FEATURES
6.4
.252
3.9±0.2
.154±.008
9.78
.385
6.4
.252
3.6±0.2
.142±.008
9.78
.385
mm inch
1
8
2
7
3
6
4
5
1. Compact 8-pin DIP size
The device comes in a compact (W) 6.4 ×
(L) 9.78 ×(H) 3.9 mm (W) .252×(L)
.385×(H) .154 inch, 8-pin DIP size
(through hole terminal type).
2. Applicable for 2 Form A use as well
as two independent 1 Form A use
3. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
4. High sensitivity, high speed response
Can control a maximum 0.13 A load current with a 5 mA input current. Fast operation speed of 310 µs (typical). (AQW214)
PhotoMOS
RELAYS
5. Low-level off state leakage current
The SSR has an off state leakage current
of several milliamperes whereas the PhotoMOS relays has only 100 pA even with
the rated load voltage of 400 V
(AQW214).
6. Low-level thermal electromotive
force (Approx. 1 µV)
7. Eliminates the need for a counter
electromotive force protection diode in
the drive circuits on the input side
8. Stable ON resistance.
9. Eliminates the need for a power supply to drive the power MOSFET
TYPICAL APPLICATIONS
• High-speed inspection machines
• Telephones equipment
• Computer
TYPES
1. AC/DC type
Part No.
Through hole
Surface-mount terminal
terminal
Load voltage
Load current
Tube packing style
Tape and reel packing style
60V
350 mA
AQW212
AQW212A
AQW212AX
AQW212AZ
100 V
300 mA
AQW215
AQW215A
AQW215AX
AQW215AZ
200 V
160 mA
AQW217
AQW217A
AQW217AX
AQW217AZ
350 V
120 mA
AQW210
AQW210A
AQW210AX
AQW210AZ
400 V
100 mA
AQW214
AQW214A
AQW214AX
AQW214AZ
600 V
40 mA
AQW216
AQW216A
AQW216AX
AQW216AZ
*Indicate the peak AC and DC values.
Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal.
Output rating*
Packing quantity
Tube
Tape and reel
1 tube contains
40 pcs.
1 batch contains
400 pcs.
1,000 pcs.
RATING
1. AC/DC type
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
LED forward current
LED reverse voltage
Input
Peak forward current
Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A)
IF
50 mA
3V
VR
f = 100 Hz,
Duty factor = 0.1%
IFP
1A
Power dissipation
Load voltage
(peak AC)
Continuous load
Output current
Pin
75 mW
VL
60 V
100 V
200 V
350 V
400 V
600 V
IL
0.35 A
(0.40A)
0.30 A
(0.35 A)
0.16 A
(0.2 A)
0.12 A
(0.14 A)
0.10 A
(0.13 A)
0.04 A
(0.05 A)
1.0 A
0.9 A
0.48 A
0.36 A
0.3 A
0.12 A
Peak load current
Ipeak
Power dissipation
Total power dissipation
Pout
PT
800 mW
850 mW
I/O isolation voltage
Viso
1,500 V AC
Operating
Topr
–40°C to +85°C –40°F to +185°F
Storage
Tstg
–40°C to +100°C –40°F to +212°F
Temperature
limits
Remarks
( ): in case of using only 1 channel
A connection: Peak AC, DC
A connection: 100 ms (1 shot),
VL = DC
Between input and output/
between contact sets
Non-condensing at low
temperatures
57
AQW21❍
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Item
LED operate
current
LED turn off
current
Input
LED dropout
voltage
On resistance
Output
Typical
Maximum
Minimum
Typical
Typical
Maximum
Typical
Maximum
Off state leakage
Maximum
current
Turn on time*
Transfer
characteristics
Turn off time*
I/O capacitance
Typical
Maximum
Typical
Maximum
Typical
Maximum
Initial I/C isolation
Minimum
resistance
Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A)
Condition
0.9 mA
IFon
IL = Max.
3 mA
0.4 mA
IFoff
IL = Max.
0.8 mA
1.14 V (1.25 V at IF = 50 mA)
VF
IF = 5 mA
1.5 V
0.83 Ω
2.3 Ω
11 Ω
23 Ω
30 Ω
70 Ω
IF = 5 mA
Ron
IL = Max.
2.5 Ω
4.0 Ω
15 Ω
35 Ω
50 Ω
120 Ω
Within 1 son time
IF = 0
ILeak
1 µA
VL = Max.
0.65 ms
0.60 ms
0.25 ms
0.25 ms
0.31 ms
0.28 ms IF = 5 mA
Ton
IL = Max.
2 ms
2 ms
1.0 ms
0.5 ms
0.5 ms
0.5 ms
0.08 ms
Toff
Ciso
0.06 ms
0.05 ms
0.05 ms
0.2 ms
0.8 pF
1.5 pF
0.05 ms
IF = 5 mA
IL = Max.
f = 1 MHz
VB = 0
1,000 MΩ
Riso
0.04 ms
500 V DC
Note: Recommendable LED forward current IF = 5mA.
For type of connection, see page 32.
*Turn on/Turn off time
Input
90%
Output
10%
Ton
Toff
■ For Dimensions, see Page 27.
■ For Schematic and Wiring Diagrams, see Page 32.
■ For Cautions for Use, see Page 36.
REFERENCE DATA
1. Load current vs. ambient temperature characteristics
2.-(1) On resistance vs. ambient temperature
characteristics
2.-(2) On resistance vs. ambient temperature
characteristics
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
500
AQW212
300
200
100
AQW215
AQW217
AQW210
AQW214
120
100
4
AQW215
3
2
AQW212
1
On resistamce, Ω
Load current, mA
400
On resistamce, Ω
5
AQW216
80
60
AQW214
40
AQW210
20
AQW216
0
–40 –20
58
8085 100
0
20
40
60
Ambient temperature, °C
0
–40
–20
0
20
40
60
8085
Ambient temperature, °C
0
AQW217
–40
–20
0
20
40
60
8085
Ambient temperature, °C
AQW21❍
3. Turn on time vs. ambient temperature characteristics
4. Turn off time vs. ambient temperature characteristics
5. LED operate current vs. ambient temperature characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
5
1.5
AQW212,AQW215
1.0
AQW214
0.3
0.2
AQW212,215
AQW216,210,217
0.1
0.5
LED operate ourrent, mA
0.4
Turn off time, ms
Turn on time, ms
2.0
4
3
2
1
AQW216,AQW210,AQW217
0
–40
–20
0
20
40
60
0
8085
–40
–20
0
20
AQW214
40
60
0
8085
–40
–20
Ambient temperature, °C
Ambient temperature, °C
0
20
40
60
8085
Ambient temperature, °C
6. LED turn off current vs. ambient temperature
characteristics
7. LED dropout voltage vs. ambient temperature characteristics
8.-(1) Voltage vs. current characteristics of output at MOS portion
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Sample: All types;
LED current: 5 to 50 mA
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
0.5
4
3
2
Current, A
1.5
LED dropout voltage, V
LED turn off current, mA
5
1.4
1.3
1.2
–0.2
–0.3
1.0
0
20
40
60
8085
Ambient temperature, °C
8.-(2) Voltage vs. current characteristics of output at MOS portion
Current, mA
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
–0.4
–40
–20
–0.5
0
20
40
60
8085
Ambient temperature, °C
9. Off state leakage current
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
1.2
AQW217
160
AQW210
AQW214
120
80
AQW216
40
1
–40
2 3 4 5
Voltage, V
–80
10–3
1.0
10–6
10–9
AQW212,AQW215
0.6
AQW210,AQW216,AQW217
AQW216
0.2
AQW214
10–12
–160
–200
0
20
60
40
80
Load voltage, V
100
0
10
20
30
40
50
LED forward current, mA
11. LED forward current vs. turn off time characteristics
12. Applied voltage vs. output capacitance
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
Measured portion: between terminals 5 and 6, 7 and 8;
Frequency: 1 MHz;
Ambient temperature: 25°C 77°F
200
Output capacitamce, pF
0.12
0.10
AQW212
Turn off time, ms
0.8
0.4
AQW214
–120
0.08
AQW215
0.06
AQW216
AQW210,217
0.04
AQW214
150
100
AQW216,AQW210
AQW217
AQW214
AQW212
AQW215
50
0.02
0
10
20
30
40
50
LED forward current, mA
5/7/2001
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
200
–5 –4 –3 –2 –1
0
10. LED forward current vs. turn on time characteristics
Turn on time, ms
–20
Off state leakage current, A
–40
0.2
0 0.2 0.4 0.6 0.8 1.0
–0.1 Voltage, V
50mA
30mA
20mA
10mA
5mA
1.1
0
AQW212
AQW215
0.3
0.1
–1.0 –0.8 –0.6 –0.4 –0.2
1
0
0.4
0
0
10
20
30
40
50
Applied voltage, V
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
59
Go To Online Catalog
Similar pages