PERT1602CT \ ERT1602FCT SUPERFAST RECOVERY RECTIFIERS Voltage 200 V Current 16 A ERT1602CT TO-220AB Features Plastic package has Underwriters Laboratory. Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. Hyperfast recovery time. Epitaxial construction. Low forward voltage, high current capability. Hermetically sealed. Low leakage. High surge capability. Lead free in compliance with EU RoHS 2011/65/EU directive. ERT1602FCT ITO-220AB Mechanical Data Case: Molded plastic, TO-220AB, ITO-220AB Terminals: Axial leads,solderable per MIL-STD-750, Method 2026 TO-220AB Weight: 0.067 ounces, 1.89 grams. ITO-220AB Weight: 0.056 ounces, 1.6 grams. Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Maximum repetitive peak reverse voltage VRRM 200 V Maximum rms voltage VRMS 140 V VR 200 V Maximum dc blocking voltage Maximum average forward rectified current per device per diode Peak forward surge current : 8.3ms single half sinewave superimposed on rated load per diode Maximum forward voltage at 8A per diode Maximum dc reverse current at rated dc blocking voltage per diode Typical junction capacitance (Note 1) Operating junction temperature range Storage temperature range IF(AV) 16 8 A IFSM 125 A VF 0.95 V IR 1 A CJ 75 pF TJ -55 to +150 o TSTG -55 to +150 o C C Note:1. Measured at 1 MHz and Applied Reverse Voltage of 4 Volts. July 9,2015-REV.00 Page 1 PERT1602CT \ ERT1602FCT o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER Maximum reverse recovery (Note 2) time Typical thermal resistance TO-220AB (Note 3) per diode ITO-220AB (Note 3) SYMBOL LIMIT UNIT TRR 25 ns 1.5 RθJC o C/W 5 Note:2. Reverse Recovery Test Conditions : IF=0.5A, IR=-1A, Recovery to -0.25A IF, Forward Current (A) 10 8 6 TO-220AB ITO-220AB 4 2 0 per diode 0 25 50 75 100 125 150 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) 3. Device mounted on a infinite heatsink , then measured the center of the marking side. 10 1 TJ = 125°C 0.1 TJ = 75°C per diode TJ = 25°C 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics July 9,2015-REV.00 10 per diode 1 1 10 100 VR, Reverse Bias Voltage (V) 100 TJ = 150°C 0.01 100 Fig.2 Typical Junction Capacitance IF, Forward Current (A) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve 1000 10 TJ = 150°C 1 TJ = 75°C TJ = 125°C TJ = 25°C 0.1 0.01 per diode 0 0.2 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 0.038(0.96) 0.019(0.50) 0.100(2.54) July 9,2015-REV.00 0.50(12.7)MIN. 0.058(1.47) 0.042(1.07) 0.177(4.5) MAX. 0.100(2.54) 0.115(2.92) 0.080(2.03) 0.025(0.65)MAX. 0.055(1.4) 0.039(1.0) 0.055(1.4) 0.039(1.0) 0.028(0.7) 0.019(0.5) 0.100(2.55) 0.100(2.55) 0.128(3.25) MIN. 0.130(3.3) 0.114(2.9) 0.606(15.4) 0.583(14.8) 0.134(3.4) 0.118(3.0) 0.146(3.7) 0.130(3.3) 0.624(15.87) 0.548(13.93) 0.054(1.39) 0.045(1.15) 0.189(4.8) 0.165(4.2) 0.543(13.8) 0.512(13.0) 0.156(3.95) 0.147(3.75) 0.406(10.3) 0.381(9.7) 0.272(6.9) 0.248(6.3) 0.196(5.00) 0.163(4.16) 0.177(4.5) 0.137(3.5) 0.419(10.66) 0.387(9.85) 0.112(2.85) 0.100(2.55) PERT1602CT \ ERT1602FCT 0.114(2.9) 0.098(2.5) 0.027(0.67) 0.022(0.57) Page 3 PERT1602CT \ ERT1602FCT Part No_packing code_Version ERT1602CT_T0_00001 ERT1602CT_T0_10001 ERT1602FCT_T0_00001 ERT1602FCT_T0_10001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D July 9,2015-REV.00 Page 4 PERT1602CT \ ERT1602FCT Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 9,2015-REV.00 Page 5