Omron B3U-1000P Ultra-small tactile switch Datasheet

Ultra-small Tactile Switch
B3U
Ultra-small-sized Tactile Switch with High
Contact Reliability: 1.2 x 3 x 2.5 mm (H x W x D)
• Industry’s smallest switch* allows high-density mounting on
PCBs for mobile equipment.
*As of October 2006 (according to OMRON survey).
• Dust-proof construction provides high reliability in dusty
environments.
• Surface mounted: Ideal for high-density mounting.
• Models with ground terminals are available for protection
against static electricity.
• RoHS Compliant
Ordering Information
Model
Type
Quantity per reel Locating pin
Without ground terminal
Top-actuated
3,500 pieces
Without boss
B3U-1000P
With ground terminal
With boss
B3U-1000P-B
B3U-1100P-B
Side-actuated
4,000 pieces
Without boss
B3U-3000P
B3U-3100P
With boss
B3U-3000P-B
B3U-3100P-B
B3U-1100P
Note: 1. Order in multiples of the quantities given for each package
2. Replace “P” in the part number with “PM” to order versions with 1,000 pieces per reel. Example: B3U-3100PM-B
Specifications
■ Characteristics
Top-actuated
(B3U-1000 Series)
Item
Contact form
SPST-NO
Switching capacity
1 to 50 mA, 5 to 12 VDC (resistive load)
Side-actuated
(B3U-3000 Series)
Contact resistance
100 mΩ max. (rated: 1 mA, 5 VDC)
Insulation resistance
100 MΩ min. (at 100 VDC)
Dielectric strength
250 VAC, 50/60 Hz for 1 min
Bounce time
5 ms max.
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude
Shock resistance
1,000 m/s2 max.
Life expectancy
200,000 operations min.
Ambient operating temperature
–25 to 70°C, (at 60% RH max.) with no icing or condensation
Ambient operating humidity
35% to 85% (at 5 to 35°C)
Weight
Approx. 0.022 g
100,000 operations min.
Note: Data shown are of initial value
■ Operating Characteristics
Top-actuated
(B3U-1000 Series)
Characteristics
Operating force (OF)
153 ± 50 gf
Releasing force (RF) min.
20.3 gf
Pretravel (PT)
0.15 +0.2
– 0.1 mm
Side-actuated
(B3U-3000 Series)
162 ± 50 gf
0.2 +0.2
– 0.1 mm
Ultra-small Tactile Switch
B3U
243
Dimensions
Note: All dimensions are in millimeters unless otherwise indicated. Unless otherwise specified, a tolerance of ±0.2 mm applies to all dimensions.
■ Top-actuated Models
Without Ground Terminal, without Boss
With Ground Terminal, without Boss
B3U-1000P
B3U-1100P
PCB Mounting
(Top View)
1.6 +0.15
−0.10
4
3
2.5
1.4
4
3
4.2±0.1
2.6±0.1
1.2 +0.15
−0.10
2.5
1.7±0.1
PCB Mounting
(Top View)
1.6 +0.15
−0.10
4.2±0.1
2.6±0.1
1.2 +0.15
−0.10
1.4
1.7±0.1
1.1±0.1
1.9
1.1±0.1
1.5 dia.
1.5 dia.
0.5
0.8±0.1
Without Ground Terminal, with Boss
With Ground Terminal, with Boss
B3U-1000P-B
B3U-1100P-B
1.6
4
3
2.5
PCB Mounting
(Top View)
+0.15
−0.10
1.6 +0.15
−0.10
1.2
1.4
PCB Mounting
(Top View)
1.7±0.1
2.5
Hole:
1.5 dia.
4
3
4.2±0.1
2.6±0.1
+0.15
−0.10
4.2±0.1
2.6±0.1
1.2 +0.15
−0.10
1.4
1.7±0.1
1.1±0.1
1.9
0.75 +0.1
0 dia.
Hole:
1.5 dia.
0.75 +0.1
0 dia.
0.5
0.8±0.1
0.5
0.5
0.65±0.05 dia.
244
Ultra-small Tactile Switch
0.65±0.05 dia.
B3U
1.1±0.1
■ Side-actuated Models
Note: All dimensions are in millimeters unless otherwise indicated. Unless otherwise specified, a tolerance of ±0.2 mm applies to all dimensions.
Without Ground Terminal, without Boss
With Ground Terminal, without Boss
B3U-3000P
B3U-3100P
4
3
PCB Mounting
(Top View)
1.2+0.15
−0.10
1.7
1±0.1
0.9
4
3
1.7
0.9
4.2±0.1
2.6±0.1
1±0.1
2.5
4.2±0.1
2.6±0.1
1.95
1.95
3.2
PCB Mounting
(Top View)
1.2+0.15
−0.10
3.2
1.7±0.1
1.4
2.5
1.7±0.1
1.4
1.1±0.1
1.9
1.1±0.1
0.5
0.8±0.1
Without Ground Terminal, with Boss
With Ground Terminal, with Boss
B3U-3000P-B
B3U-3100P-B
4
3
PCB Mounting
(Top View)
1.2+0.15
−0.10
1.7
4
3
1.7
1±0.1
0.9
1±0.1
0.9
4.2±0.1
2.6±0.1
1.95
3.2
2.5
4.2±0.1
2.6±0.1
1.95
3.2
1.7±0.1
1.4
PCB Mounting
(Top View)
1.2+0.15
−0.10
Hole:
2.5
1.7±0.1
1.4
1.1±0.1
1.9
0.75 +0.1
0 dia.
Hole:
0.75 +0.1
0 dia.
1.1±0.1
0.5
0.8±0.1
0.5
0.65±0.05 dia.
0.5
0.65±0.05 dia.
Ultra-small Tactile Switch
B3U
245
Precautions
Be sure to read the precautions common to all Tactile Switches, contained in the Technical User’s Guide, “Tactile Switches, Technical Information”
for correct use.
■ Precautions for Correct Use
Soldering
Packaging Specifications
Perform reflow soldering within the ranges shown in the terminal temperature profile in the following diagram.
The specifications for B3U Switches packaged on embossed tape
are as follows:
Temperature (°C)
B3U-1000 Series
(19)
13 dia.
Tape drawing 1.5 +0.1 dia.
0
direction
8+0.1
2
4+0.1
1.75±0.1
2.55
5.5
260 max.
12±0.3
220
Reel
Label
Tape drawing direction
B3U-3000 Series
180
(19)
150
330±2 dia.
Preheating time
Heating
time
13 dia.
Tape drawing
+0.1
1.5 0 dia.
direction
8+0.1
2
4+0.1
1.75±0.1
2.2
5.5
12±0.3
60 to 120
60 max.
Time (s)
Reel
Washing
B3U Switches cannot be washed. Doing so will cause the washing
agent, together with flux or dust particles on the PCB, to enter the
Switch, resulting in malfunction.
Compliance with RoHS Directive
The “RoHS Compliant” designation indicates that the product does
not contain the following six hazardous substances covered by the
RoHS Directive.
Reference: The following standards are used to determine compliance for the six substances.
Lead:1,000 ppm max.
Mercury:1,000 ppm max.
Cadmium:100 ppm max.
Hexavalent chromium:1,000 ppm max.
PBB:1,000 ppm max.
PBDE:1,000 ppm max.
330±2 dia.
Label
Tape drawing direction
Standards
Conforms to JEITA.
Package
3,500 Switches (B3U-1000 Series)
4,000 Switches (B3U-3000 Series)
Heat resistance
50°C for 24 hours (without deformation)
Operation
Do not repeatedly operate the Switch with excessive force. Applying
excessive pressure or applying additional force after the plunger has
stopped may deform the disc spring of the Switch, resulting in malfunction. (Maximum force = 30N)
Be sure to set up the Switch so that the plunger will be pressed
straight in. The life of the Switch may be reduced if the plunger is
pressed off-center or from an angle. Do not apply pressure from
above or below the plunger. Doing so may deform or damage parts
or cause faulty operation.
Storage and Operating Environment
Do not store the product under the following conditions to prevent
discoloration and other deterioration of the terminals.
1. Locations subject to high temperatures or humidity
2. Locations containing corrosive gases
3. Locations subject to direct sunlight
The Switch is not provided with a watertight or drip-proof construction. Do not install or operate the product in locations subject to water
spray or splashes.
Do not operate the plunger from the side. Doing so may deform or
damage the Switch.
246
Ultra-small Tactile Switch
B3U
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Ultra-small Tactile Switch
B3U
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X303-E-1
11/09
Ultra-small Tactile Switch
Specifications subject to change without notice
B3U
Printed in USA
Similar pages