C Series High Q Capacitors Type: C0603 [EIA CC0201] Issue date: April 2011 TDK MLCC US Catalog Version B11 REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. 2. 3. 4. 5. 6. 7. If you intend to use a product listed in this catalog for a purpose that may cause loss of life or other damage, you must contact our company’s sales window. We may modify products or discontinue production of a product listed in this catalog without prior notification. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly recommend that you exchange these delivery specifications with customers that use one of these products. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you use a product listed in this catalog. We do not grant license of these rights. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to products that are purchased through other third parties. TDK MLCC US Catalog Page 148 Version B11 C Series High Q Capacitors Type: C0603 Available Through Distribution Only* Features Higher Q factor than standard capacitors High stability ith respect to ti e te perature fre uency and voltage cellent attenuation High self-resonant fre uency Lo er po er dissipation less energy absorption Capacitance range of 0.2pF to 15pF Available in standard and tight tolerance Please contact TDK for Q values Applications High-fre uency applications PA modules Cellular communication, Bluetooth Cable/satellite TV GPS/satellite radio Filter networks/matching networks RF amplifiers/Low noise amplifiers VCOs, TCXOs, etc. DC blocking circuits Shape & Dimensions LL W TW BT B Body BodyLength Length Body Width BodyHeight Width Body Terminal Width Body Height Terminal Width Dimensions in mm Part Number Construction C 0603 C0G 1E 150 J T XXXX Series Name Dimensions L x W (mm) Case Code C0603 Length 0.60 ± 0.03 Internal Codes Packaging Style Width 0.30 ± 0.03 Packaging Code T Temperature Characteristic Temperature Characteristics Capacitance Change Temperature Range C0G 0±30 ppm/ºC -55 to +125ºC Capacitance Tolerance Rated Voltage (DC) Voltage Code 1E Voltage (DC) 25V Nominal Capacitance (pF) The capacitance is expressed in three digit codes and in units of pico Farads (pF). The first and second digits identify the first and second significant figures of the capacitance. The third digit identifies the multiplier. R designates a decimal point. Capacitance Code 0R5 010 102 105 Style Tape & Reel Tolerance Code W B C D E G J Tolerance ± 0.05 pF ± 0.10 pF ± 0.25 pF ± 0.50 pF ± 0.20 pF ± 2% ± 5% Capacitance 0.5pF 1pF 1,000pF (1nF) 1,000,000pF (1μF) * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 149 Version B11 C0603 [EIA CC0201] Capacitance Range Chart Capacitance Range Chart Temperature Characteristics: C0G (0 ± 30ppm/ºC) Rated Voltage: 25V(1E) Capacitance (pF) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.2 2.4 2.7 3 3.3 3.6 3.9 4 4.3 4.7 5 5.1 5.6 6 6.2 6.8 7 7.5 8 8.2 9 9.1 10 11 12 13 15 16 18 20 Cap Code 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 010 1R1 1R2 1R3 1R5 1R6 1R8 020 2R2 2R4 2R7 030 3R3 3R6 3R9 040 4R3 4R7 050 5R1 5R6 060 6R2 6R8 070 7R5 080 8R2 090 9R1 100 110 120 130 150 160 180 200 Temperature Characteristics Tolerance W (±0.05) B C D E (±0.10pF) (±0.25pF) (±0.50pF) (±0.20pF) G (±2%) J (±5%) -55 to 125ºC, 0±30 ppm/ºC Standard Thickness 0.30 mm * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 150 Version B11 C0603 [EIA CC0201] Capacitance Range Table Class 1 (Temperature Compensating) Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC) TDK Part Number (Ordering Code) Temperature Characteristics Rated Voltage Capacitance (pF) Capacitance Tolerance Thickness (mm) C0603C0G1E0R2WTQ C0G 25V 0.2 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R2BTQ C0G 25V 0.2 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R3WTQ C0G 25V 0.3 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R3BTQ C0G 25V 0.3 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R4WTQ C0G 25V 0.4 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R4BTQ C0G 25V 0.4 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R5WTQ C0G 25V 0.5 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R5BTQ C0G 25V 0.5 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R6WTQ C0G 25V 0.6 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R6BTQ C0G 25V 0.6 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R7WTQ C0G 25V 0.7 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R8WTQ C0G 25V 0.7 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R7BTQ C0G 25V 0.7 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R8BTQ C0G 25V 0.8 ± 0.10pF 0.30 ± 0.03 C0603C0G1E0R9WTQ C0G 25V 0.9 ± 0.05pF 0.30 ± 0.03 C0603C0G1E0R9BTQ C0G 25V 0.9 ± 0.10pF 0.30 ± 0.03 C0603C0G1E010BTQ C0G 25V 1.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E010CTQ C0G 25V 1.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E1R1BTQ C0G 25V 1.1 ± 0.10pF 0.30 ± 0.03 C0603C0G1E1R1CTQ C0G 25V 1.1 ± 0.25pF 0.30 ± 0.03 C0603C0G1E1R2BTQ C0G 25V 1.2 ± 0.10pF 0.30 ± 0.03 C0603C0G1E1R2CTQ C0G 25V 1.2 ± 0.25pF 0.30 ± 0.03 C0603C0G1E1R3BTQ C0G 25V 1.3 ± 0.10pF 0.30 ± 0.03 C0603C0G1E1R3CTQ C0G 25V 1.3 ± 0.25pF 0.30 ± 0.03 C0603C0G1E1R5BTQ C0G 25V 1.5 ± 0.10pF 0.30 ± 0.03 C0603C0G1E1R5CTQ C0G 25V 1.5 ± 0.25pF 0.30 ± 0.03 C0603C0G1E1R6BTQ C0G 25V 1.6 ± 0.10pF 0.30 ± 0.03 C0603C0G1E1R6CTQ C0G 25V 1.6 ± 0.25pF 0.30 ± 0.03 C0603C0G1E1R8BTQ C0G 25V 1.8 ± 0.10pF 0.30 ± 0.03 C0603C0G1E1R8CTQ C0G 25V 1.8 ± 0.25pF 0.30 ± 0.03 C0603C0G1E020BTQ C0G 25V 2.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E020CTQ C0G 25V 2.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E2R2BTX C0G 25V 2.2 ± 0.10pF 0.30 ± 0.03 C0603C0G1E2R2CTX C0G 25V 2.2 ± 0.25pF 0.30 ± 0.03 C0603C0G1E2R4BTX C0G 25V 2.4 ± 0.10pF 0.30 ± 0.03 C0603C0G1E2R4CTX C0G 25V 2.4 ± 0.25pF 0.30 ± 0.03 C0603C0G1E2R7BTX C0G 25V 2.7 ± 0.10pF 0.30 ± 0.03 C0603C0G1E2R7CTX C0G 25V 2.7 ± 0.25pF 0.30 ± 0.03 C0603C0G1E030BTX C0G 25V 3.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E030CTX C0G 25V 3.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E3R3BTX C0G 25V 3.3 ± 0.10pF 0.30 ± 0.03 C0603C0G1E3R3CTX C0G 25V 3.3 ± 0.25pF 0.30 ± 0.03 C0603C0G1E3R6BTX C0G 25V 3.6 ± 0.10pF 0.30 ± 0.03 C0603C0G1E3R6CTX C0G 25V 3.6 ± 0.25pF 0.30 ± 0.03 * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 151 Version B11 C0603 [EIA CC0201] Capacitance Range Table Class 1 (Temperature Compensating) Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC) TDK Part Number (Ordering Code) Temperature Characteristics Rated Voltage Capacitance (pF) Capacitance Tolerance Thickness (mm) C0603C0G1E3R9BTX C0G 25V 3.9 ± 0.10pF 0.30 ± 0.03 C0603C0G1E3R9CTX C0G 25V 3.9 ± 0.25pF 0.30 ± 0.03 C0603C0G1E040BTX C0G 25V 4.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E040CTX C0G 25V 4.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E4R3BTX C0G 25V 4.3 ± 0.10pF 0.30 ± 0.03 C0603C0G1E4R3CTX C0G 25V 4.3 ± 0.25pF 0.30 ± 0.03 C0603C0G1E4R7BTX C0G 25V 4.7 ± 0.10pF 0.30 ± 0.03 C0603C0G1E4R7CTX C0G 25V 4.7 ± 0.25pF 0.30 ± 0.03 C0603C0G1E050BTX C0G 25V 5.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E050CTX C0G 25V 5.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E5R1BTX C0G 25V 5.1 ± 0.10pF 0.30 ± 0.03 C0603C0G1E5R1CTX C0G 25V 5.1 ± 0.25pF 0.30 ± 0.03 C0603C0G1E5R6BTX C0G 25V 5.6 ± 0.10pF 0.30 ± 0.03 C0603C0G1E5R6CTX C0G 25V 5.6 ± 0.25pF 0.30 ± 0.03 C0603C0G1E060BTX C0G 25V 6.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E060CTX C0G 25V 6.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E6R2BTX C0G 25V 6.2 ± 0.10pF 0.30 ± 0.03 C0603C0G1E6R2CTX C0G 25V 6.2 ± 0.25pF 0.30 ± 0.03 C0603C0G1E6R8BTX C0G 25V 6.8 ± 0.10pF 0.30 ± 0.03 C0603C0G1E6R8CTX C0G 25V 6.8 ± 0.25pF 0.30 ± 0.03 C0603C0G1E070BTX C0G 25V 7.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E070CTX C0G 25V 7.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E7R5BTX C0G 25V 7.5 ± 0.10pF 0.30 ± 0.03 C0603C0G1E7R5CTX C0G 25V 7.5 ± 0.25pF 0.30 ± 0.03 C0603C0G1E080BTX C0G 25V 8.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E080CTX C0G 25V 8.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E8R2BTX C0G 25V 8.2 ± 0.10pF 0.30 ± 0.03 C0603C0G1E8R2CTX C0G 25V 8.2 ± 0.25pF 0.30 ± 0.03 C0603C0G1E090BTX C0G 25V 9.0 ± 0.10pF 0.30 ± 0.03 C0603C0G1E090CTX C0G 25V 9.0 ± 0.25pF 0.30 ± 0.03 C0603C0G1E9R1BTX C0G 25V 9.1 ± 0.10pF 0.30 ± 0.03 C0603C0G1E9R1CTX C0G 25V 9.1 ± 0.25pF 0.30 ± 0.03 C0603C0G1E100ETX C0G 25V 10 ± 0.20pF 0.30 ± 0.03 C0603C0G1E100DTX C0G 25V 10 ± 0.50pF 0.30 ± 0.03 C0603C0G1E110GTX C0G 25V 11 ± 2% 0.30 ± 0.03 C0603C0G1E110JTX C0G 25V 11 ± 5% 0.30 ± 0.03 C0603C0G1E120GTX C0G 25V 12 ± 2% 0.30 ± 0.03 C0603C0G1E120JTX C0G 25V 12 ± 5% 0.30 ± 0.03 C0603C0G1E130GTX C0G 25V 13 ± 2% 0.30 ± 0.03 C0603C0G1E130JTX C0G 25V 13 ± 5% 0.30 ± 0.03 C0603C0G1E150GTX C0G 25V 15 ± 2% 0.30 ± 0.03 C0603C0G1E150JTX C0G 25V 15 ± 5% 0.30 ± 0.03 C0603C0G1E160GTX C0G 25V 16 ± 2% 0.30 ± 0.03 C0603C0G1E160JTX C0G 25V 16 ± 5% 0.30 ± 0.03 * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 152 Version B11 C0603 [EIA CC0201] Capacitance Range Table Class 1 (Temperature Compensating) Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC) TDK Part Number (Ordering Code) Temperature Characteristics Rated Voltage Capacitance (pF) Capacitance Tolerance Thickness (mm) C0603C0G1E180GTX C0G 25V 18 ± 2% 0.30 ± 0.03 C0603C0G1E180JTX C0G 25V 18 ± 5% 0.30 ± 0.03 C0603C0G1E200GTX C0G 25V 20 ± 2% 0.30 ± 0.03 C0603C0G1E200JTX C0G 25V 20 ± 5% 0.30 ± 0.03 * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 153 Version B11 C0603 Series – High Q Capacitors General Specifications No. Item Performance Test or Inspection Method 1 External Appearance No defects which may affect performance. Inspect with magnifying glass (10). 2 Insulation Resistance 10,000M min. Apply rated voltage for 60s. 3 Voltage Proof Withstand test voltage without insulation breakdown or other damage. Class Apply voltage Class 1 3 rated voltage Above DC voltage shall be applied for 1 to 5s. Charge / discharge current shall not exceed 50mA. 4 5 Capacitance Q (Class 1) Within the specified tolerance. Q C 1,000 min. 30pF Measuring Frequency Measuring voltage Class 1 1MHz±10% 0.5 - 5 Vrms See No.4 in this table for measuring condition. Rated Capacitance C < 30pF Class 400 + 20C min. C : Rated capacitance (pF) 6 7 Temperature Characteristics of Capacitance (Class 1) Robustness of Terminations T.C. Temperature Coefficient C0G 0 r 30 ppm/ºC Temperature coefficient shall be calculated based on values at 25ºC and 85ºC temperature. Capacitance drift Within r 0.2% or r0.05pF, whichever larger. Measuring temperature below 20ºC shall be -10ºC and -25ºC. No sign of termination coming off, breakage of ceramic, or other abnormal signs. Reflow solder the capacitor on P.C. board (shown in Appendix 1) and apply a pushing force of 2N for 10r1s. Pushing force P.C. board Capacitor 8 Bending No mechanical damage. Reflow solder the capacitor on P.C. board (shown in Appendix 2) and bend it for 1mm. 20 50 F R230 1 45 45 Unit: mm * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 154 Version B11 C0603 Series – High Q Capacitors General Specifications No. Item Performance Test or Inspection Method 9 Solderability New solder to cover over 75% of termination. Completely soak both terminations in solder at 235r5ºC for 2r0.5s. 25% may have pinholes or rough spots but not concentrated in one spot. Solder: H63A (JIS Z 3282) Ceramic surface of A sections shall not be exposed due to melting or shifting of termination material. Flux: Isopropyl alcohol (JIS K 8839) Rosin (JIS K 5902) 25% solid solution. A section 10 Resistance to solder heat External appearance Capacitance No cracks are allowed and terminations shall be covered at least 60% with new solder. Characteristics Class 1 Q (Class 1) C0G Change from the value before test Capacitance drift within r2.5% or r0.25pF, whichever larger. Rated Capacitance Q C 1,000 min. 30pF C < 30pF Completely soak both terminations in solder at 260㫧5ºC for 5㫧1s. Preheating condition Temp.: 150㫧10ºC Time : 1 to 2min. Flux: Isopropyl alcohol (JIS K 8839) Rosin (JIS K 5902) 25% solid solution. Solder: H63A (JIS Z 3282) Leave the capacitor in ambient conditions for 6 to 24h before measurement. 400 + 20C min. C : Rated capacitance (pF) 11 Insulation Resistance Meet the initial spec. Voltage Proof No insulation breakdown or other damage. Reflow solder the capacitor on P.C. board (shown in Appendix 1) before testing. Vibration External appearance Capacitance No mechanical damage. Characteristics Class 1 Q (Class 1) C0G Change from the value before test Capacitance drift within r2.5% or r0.25pF, whichever larger. Rated Capacitance Q C 1,000 min. 30pF C < 30pF Vibrate the capacitor with amplitude of 1.5mm P-P sweeping the fre uencies from 10Hz to 55Hz and back to 10Hz after 1min. Repeat this for 2h each in 3 perpendicular directions. 400+20C min. C : Rated capacitance (pF) * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 155 Version B11 C0603 Series – High Q Capacitors General Specifications No. Item 12 Temperature cycle External appearance Capacitance Performance Reflow solder the capacitors on a P.C. board (shown in Appendix 1) before testing. No mechanical damage. Expose the capacitor in the conditions in step 1 through step 4, and repeat 5 times consecutively. Change from the value before test Characteristics Class 1 Q (Class 1) Test or Inspection Method C0G Capacitance drift within r2.5% or r0.25pF, whichever larger. Leave the capacitor in ambient conditions for 6 to 24h before measurement. Step Temperature (ºC) Time (min.) 1 Min. operating temp. r3 30 ± 3 2–5 Rated Capacitance Q 2 Reference Temp. C 1,000 min. 3 Max. operating temp. r 2 30 ± 2 400 + 20C min. 4 Reference Temp. 2-5 30pF C < 30pF C : Rated capacitance (pF) 13 Insulation Resistance Meet the initial spec. Voltage Proof No insulation breakdown or other damage. Reflow solder the capacitor on P.C. board (shown in Appendix 1) before testing. Moisture Resistance (Steady State) External appearance Capacitance No mechanical damage. Class 1 Q (Class 1) Change from the value before test Characteristics C0G Capacitance drift within r5% or r0.5pF, whichever larger. Rated Capacitance Q C 350 min. 30pF 10pF C < 30pF C < 10pF Leave at temperature 40㫧2ºC, 90 to 95%RH for 500 +24,0h. Leave the capacitor in ambient condition for 6 to 24h before measurement. 275 + 5/2C min. 200 + 10C min. C : Rated capacitance (pF) Insulation Resistance 1,000M min. * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 156 Version B11 C0603 Series – High Q Capacitors General Specifications No. Item 14 Moisture Resistance External appearance Capacitance Performance Reflow solder the capacitors on P.C. board (shown in Appendix 1) before testing. No mechanical damage. Apply the rated voltage at temperature 40r2ºC and 90 to 95%RH for 500 +24,0h. Characteristics Class 1 Q (Class 1) Test or Inspection Method C0G Change from the value before test Charge/discharge current shall not exceed 50mA. Capacitance drift within r7.5% or r0.75pF, whichever larger. Leave the capacitor in ambient conditions for 6 to 24h before measurement. Use this measurement for initial value. Rated Capacitance Q C 200 min. 30pF C < 30pF 100 + 10/3C min. C : Rated capacitance (pF) Insulation Resistance 15 500M min. Reflow solder the capacitor on P.C. board (shown in Appendix 1) before testing. Life External appearance Capacitance No mechanical damage. Apply 2x rated voltage at 125㫧2ºC for 1,000 +48, 0h. Class 1 Q (Class 1) Change from the value before test Characteristics C0G Capacitance drift within r3% or r0.3pF, whichever larger. Rated Capacitance Q C 350 min. 30pF 10pF C < 30pF C < 10pF Charge/discharge current shall not exceed 50mA. Leave the capacitors in ambient condition for 6 to 24h before measurement. Use this measurement for initial value. 275 + 5/2C min. 200 + 10C min. C : Rated capacitance (pF) Insulation Resistance 1,000M min. * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 157 Version B11 C0603 Series – High Q Capacitors General Specifications Appendix - 1a Appendix - 2a P.C. Board for reliability test Applied for C0603, C1005, C1608, C2012, C3216 P.C. Board for bending test Applied for C0603, C1005 100 mm 100 mm b Solder Resist Copper 40 mm 1.0 mm 40 mm a b c a Solder resist c b Copper Material : Glass Epoxy ( As per JIS C6484 GE4 ) P.C. Board thickness : Appendix - 2 0.8mm Appendix - 1 1.6mm Case Code Dimensions (mm) JIS EIA a b c C0603 CC0201 0.3 0.8 0.3 Copper ( thickness 0.035mm ) Solder resist * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 158 Version B11 C0603 Series – High Q Capacitors Soldering Information ¬ Recommended Soldering Land Pattern Chip capacitor ¬ Recommended Soldering Profile Reflow Soldering Solder land Preheating 300 Solder resist 0 Reflow Soldering Type Symbol Unit: mm 0.25 ~ 0.35 B 0.2 ~ 0.3 C T Ade uate solder Insufficient solder Preheating Peak Temp time 3sec. (As short as possible) Recommended soldering duration Temp./ Dura. 0.25 ~ 0.35 Reflow Soldering Peak temp (°C) Duration (sec.) Sn-Pb Solder 230 max. 20 max. Lead-Free Solder 260 max. 10 max. Solder ¬ Recommended Solder Amount Excessive solder T 0 Over 60 sec. C0603 [CC0201] A Temp (ºC) A B Temp (ºC) Peak Temp C Manual soldering (Solder iron) Soldering Natural cooling Recommended solder compositions Sn-37Pb (Sn-Pb solder) Sn-3.0Ag-0.5Cu (Lead Free Solder) Higher tensile force on the chip capacitor may cause cracking. Preheating Condition Soldering Maximum amount Minimum amount Temp. (ºC) Reflow soldering T 150 Manual soldering T 150 Small solder fillet may cause contact failure or failure to hold the chip capacitor to the P.C. board. * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 159 Version B11 C0603 Series – High Q Capacitors Packaging Information ¬ Carrier Tape Configuration Bulk 160mm min. Bulk 160mm min Chips Leader Drawing direction 400mm min ¬ Peel Back Force (Top Tape) Direction & angle of pull Top cover tape Carrier tape 0.05 – 0.7 N 0~15q Direction of pull force Carrier tape shall be flexible enough to be wound around a minimum radius of 30mm with components in tape. The missing of components shall be less than 0.1% Components shall not stick to the cover tape. The cover tape shall not protrude beyond the edges of the carrier tape and shall not cover the sprocket holes. Bottom cover tape (Paper carrier tape) ¬ Chip Quantity Per Reel and Structure of Reel Paper Carrier Tape & Reel Top cover tape Pitch hole Paper carrier tape Bottom cover tape (Bottom cover tape is not always applied) Case Code JIS EIA C0603 CC0201 Chip Thickness (mm) 0.30 Taping Material Paper Chip quantity (pcs.) ijPP ´ UHHO 15,000 * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 160 Version B11 C0603 Series – High Q Capacitors Ad dditional Information ¬ Shape & Dimensions ¬ Environmental Information Terminal electrode L B W G B T TDK Corporation established internal product environmental assurance standards that include the six hazardous substances banned by the EU RoHS Directive1 enforced on July 1, 2006 along with additional substances independently banned by TDK and has successfully completed making general purpose electronic components conform to the RoHS Directive2. 1. Abbreviation for Restriction on Hazardous Substances, which refers to the regulation EU Directive 2002/95/EC on hazardous substances by the European Union (EU) effective from July 1, 2006. The Directive bans the use of six specific hazardous substances in electric and electronic devices and products handled within the EU. The six substances are lead, mercury, cadmium, hexavalent chromium, PBB (polybrominated biphenyls), and PBDE (polybrominated diphenyl ethers). 2. This means that, in conformity with the EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Internal electrode Ceramic dielectric Case Code JIS EIA C0603 CC0201 L 0.60 Dimensions (mm) W T B 0.30 0.30 0.15 G 0.20 min. ¬ Inside Structure & Material System 3 4 1 5 For REACH (SVHC : 15 substances according to ECHA / October 2008) : All TDK MLCC do not contain these 15 substances. For European Directive 2000/53/CE and 2005/673/CE : Cadmium, Hexavalent Chromium, Mercury, Lead are not contained in all TDK MLCC. For European Directive 2003/11/CE : Pentabromodiphenylether, Octabromodiphenyl-ether are not contained in all TDK MLCC. 2 No. NAME MATERIAL (1) Ceramic Dielectric CaZrO3 (2) Internal Electrode Nickel (Ni) Class 1 (3) (4) Copper (Cu) Termination (5) Nickel (Ni) Tin (Sn) * This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors. TDK MLCC US Catalog Page 161 Version B11