Ordering number : EN6084E CPH3105/CPH3205 Bipolar Transistor http://onsemi.com (–)50V, (–)3A, Low VCE(sat), (PNP)NPN Single CPH3 Applications • DC-DC converters, relay drivers, lamp drivers, motor drivers, flash Features • • • • • • Adoption of FBIT, MBIT processes Large current capacity Low collector-to-emitter saturation voltage High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) High allowable power dissipation Specifications ( ): CPH3105 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Conditions Ratings Unit VCBO VCES (--50)100 V (--50)100 V VCEO VEBO (--)50 V Collector Current (Pulse) IC ICP Base Current IB Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg (--)6 V (--)3 A (--)6 A (--)600 When mounted on ceramic substrate (600mm2×0.8mm) mA 0.9 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7015A-003 • Package : CPH3 • JEITA, JEDEC : SC-59, TO-236, SOT-23 • Minimum Packing Quantity : 3,000 pcs./reel 0.6 2.9 CPH3105-TL-E CPH3205-TL-E 0.15 Packing Type: TL Marking 0.9 1 0.95 2 0.4 1 : Base 2 : Emitter 3 : Collector CPH3 CPH3105 Electrical Connection 3 1 CPH3105 CE LOT No. TL LOT No. 0.05 1.6 0.2 0.6 2.8 0.2 AE 3 CPH3205 3 1 2 CPH3205 2 Semiconductor Components Industries, LLC, 2013 September, 2013 70412 TKIM/62005EA MSIM TB-00001407/63004 TSIM TB-00000304/41000 TS(KOTO) TA-2926 No.6084-1/7 CPH3105 / CPH3205 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)500mA Output Capacitance Cob VCE(sat)1 VCB=(--)10V, f=1MHz IC=(--)1A, IB=(--)50mA VCE(sat)2 VBE(sat) IC=(--)2A, IB=(--)100mA IC=(--)2A, IB=(--)100mA V(BR)CBO V(BR)CES IC=(--)10μA, IE=0A IC=(--)100μA,RBE=0Ω V(BR)CEO V(BR)EBO IC=(--)1mA, RBE=∞ IE=(--)10μA, IC=0A Emitter Cutoff Current DC Current Gain Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time ton tstg Fall Time tf Ratings Conditions min typ Unit max 200 (--)1 μA (--)1 μA 560 (360)380 MHz (24)13 pF (--100)80 (--200)120 mV (--185)140 (--500)210 mV (--)0.88 (--)1.2 V (--50)100 V (--50)100 V (--)50 V (--)6 V (30)35 See specified Test Circuit. ns (230)300 ns (15)22 ns Switching Time Test Circuit IB1 PW=20μs DC≤1% OUTPUT INPUT RB VR OUTPUT RB VR + 100μF IB2 INPUT RL + 50Ω IB1 PW=20μs DC≤1% IB2 + 100μF 470μF VBE=5V RL + 50Ω 470μF VBE= --5V VCC= --25V VCC=25V 10IB1= --10IB2=IC=1A --10IB1=10IB2=IC= --1A CPH3105 CPH3205 Ordering Information Package Shipping memo CPH3105-TL-E Device CPH3 3,000pcs./reel Pb Free CPH3205-TL-E CPH3 3,000pcs./reel Pb Free IC -- VCE CPH3105 mA Collector Current, IC -- A 0 --4 --1.6 CPH3205 mA --30 mA --20 4.5 mA --10 --8mA --6mA --1.2 --4mA --0.8 IC -- VCE 5.0 Collector Current, IC -- A --2.0 --2mA A 100m 80mA 4.0 60mA 3.5 40mA 3.0 2.5 20mA 2.0 10mA 1.5 5mA 1.0 --0.4 0.5 IB=0mA 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V --1.0 IT08051 IB=0mA 0 0 0.4 0.8 1.2 1.6 Collector-to-Emitter Voltage, VCE -- V 2.0 IT08052 No.6084-2/7 CPH3105 / CPH3205 IC -- VBE 3.0 3.0 CPH3105 VCE= --2V 2.0 1.0 0.5 --25°C 1.5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Base-to-Emitter Voltage, VBE -- V 1.0 0 DC Current Gain, hFE Ta=75°C 7 5 3 2 25°C 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 5 3 2 100 7 5 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 7 3 5 3 2 100 7 5 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Output Capacitance, Cob -- pF 5 IT08058 Cob -- VCB CPH3205 f=1MHz 7 2 3 5 Collector Current, IC -- A CPH3105 f=1MHz 3 2 IT08056 CPH3205 VCE=10V IT08057 5 7 1.0 f T -- IC 100 7 2 0.1 7 2 0.01 5 Cob -- VCB 100 5 Collector Current, IC -- A Gain-Bandwidth Product, f T -- MHz CPH3105 VCE= --10V 3 3 1000 7 2 2 IT08055 f T -- IC 1000 2 --0.01 10 0.01 3 --25°C 100 3 2 1.0 IT08054 CPH3205 VCE=2V 5 100 10 --0.01 0.8 7 Ta=75°C 25°C --25°C 2 0.6 hFE -- IC 1000 7 3 0.4 Base-to-Emitter Voltage, VBE -- V CPH3105 VCE= --2V 5 0.2 IT08053 hFE -- IC 1000 DC Current Gain, hFE 1.0 0 0 Gain-Bandwidth Product, f T -- MHz 1.5 0.5 0 Output Capacitance, Cob -- pF 2.0 Ta=75°C 25°C --25°C Collector Current, IC -- A 2.5 Ta=7 5°C 25°C Collector Current, IC -- A 2.5 IC -- VBE CPH3205 VCE=2V 5 3 2 10 7 5 3 10 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 IT08059 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 7 IT08060 No.6084-3/7 CPH3105 / CPH3205 VCE(sat) -- IC --1000 7 5 3 2 5°C °C --25 7 Ta= 3 2 --10 --0.01 25° 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 2 --100 7 5 C 75° Ta= °C C --25 25° 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Ta= --25°C 7 75°C 25°C 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 5 7 1.0 2 3 5 IT08062 CPH3205 IC / IB=50 100 7 C 75° Ta= °C C --25 25° 5 3 2 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 IT08064 VBE(sat) -- IC CPH3205 IC / IB=50 3 2 1000 Ta= --25°C 7 75°C 25°C 5 3 2 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 IT08066 PC -- Ta CPH3105 / CPH3205 0.9 s 10 ms 10 3 2 DC s s 0μ 1.0 7 5 Collector Dissipation, PC -- W 0μ 10 50 1m 0m s op era tio n CPH3105 / CPH3205 Ta=25°C Single pulse Mounted on a ceramic board(600mm2×0.8mm) For PNP, minus sign is omitted. 3 2 VCE(sat) -- IC 1.0 IC=3A 2 7 0.1 2 ASO 0.01 0.1 5 3 ICP=6A 3 2 3 5 5 7 --10 IT08065 Collector Current, IC -- A 10 7 5 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 2 --100 --0.01 25 10 0.01 5 7 --10 IT08063 CPH3105 IC / IB=50 5 °C 2 5 3 --1000 = Ta 3 VBE(sat) -- IC 5 °C 75 C 5° --2 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 7 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 100 1000 CPH3105 IC / IB=50 --10 --0.01 Collector Current, IC -- A 2 VCE(sat) -- IC --1000 7 5 3 2 3 5 7 --10 IT08061 3 0.1 7 5 5 C Collector Current, IC -- A --10000 7 5 CPH3205 IC / IB=20 7 3 2 --100 7 5 VCE(sat) -- IC 1000 CPH3105 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --10000 7 5 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V 0.8 M ou nt ed 0.6 on ac er am ic bo ar 0.4 d (6 00 m m2 ×0 .8 0.2 m m ) 0 3 5 7 IT08067 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT08068 No.6084-4/7 CPH3105 / CPH3205 Embossed Taping Specification CPH3105-TL-E, CPH3205-TL-E No.6084-5/7 CPH3105 / CPH3205 Outline Drawing CPH3105-TL-E, CPH3205-TL-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6084-6/7 CPH3105 / CPH3205 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6084-7/7