EPCOS B41112B4336M000 Aluminum electrolytic capacitor Datasheet

Aluminum electrolytic capacitors
SMD capacitors
Series/Type:
B41112
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
SMD capacitors
B41112
Standard series 85 °C
General-purpose grade capacitors
Applications
General-purpose applications in the entertainment industry
Features
Miniaturized dimensions
RoHS compatible
Load life of 2000 h at 85 °C
Suitable for reflow soldering, see chapter "SMD capacitors Mounting instructions"
Construction
Surface mounting device
Minus pole marking on the case
Delivery mode
Taped and reeledRefer to chapter "SMD capacitors - Taping
and packing" for further details.
Specifications and characteristics in brief
Rated voltage VR
4 ... 100 V DC
Operating temperature range 40 °C ... +85 °C
Rated capacitance CR
0.1 ... 1500 µF
(20 °C, 120 Hz)
Capacitance tolerance
±20% M
Load life
2000 h
Requirements:
(85 °C, VR)
≤ ±20% of initial value
∆C/C
(4 V: within ±25% of initial value)
tan δ
≤ 2 times initial specified limit
Ileak
≤ initial specified limit
Leakage current Ileak
(20 °C, after 2 minutes)
Low temperature stability
VR (V DC)
4 6.3 10 16 25 35 50 63 100
(impedance ratio)
<∅8
7
4
3
2
2
2
2
2
2
(120 Hz)
≥∅8
7
5
4
3
2
2
2
2
2
<∅8
≥∅8
Shelf life
Frequency multiplier
for rated ripple current
15
15
8
10
8
8
4
6
4
4
3
3
3
3
3
3
3
3
After storage for 1000 h at 85 °C, the capacitors shall meet the
requirement of load life test after reforming process. After test: VR
to be applied for 30 minutes, 24 to 48 hours before measurement.
50 Hz
120 Hz
300 Hz 1 kHz
≥10 kHz
0.70
1.00
1.17
1.36
1.50
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B41112
Standard series 85 °C
Dimensional drawings
d x l (mm)
4 × 5.4 ... 8 × 6.2:
* Applies to 6.3 × 5.8 mm, 6.3 × 7.7 mm and 8 × 6.2 mm
d x l (mm)
8 × 10 ... 10 × 10:
➀
➁
➂
➃
Case
Terminal base board
Minus pole
Plus pole
Case dimensions
d × l (mm)
A
B
C
E
H
4 × 5.4
5 × 5.4 6.3 × 5.4 6.3 × 5.8 6.3 × 7.7 8 × 6.2
1.8
4.3
4.3
1.0
Please read Cautions and warnings and
Important notes at the end of this document.
2.1
5.3
5.3
1.3
2.4
2.4
6.6
6.6
6.6
6.6
2.2
2.2
0.5 ... 0.8
Page 3 of 17
2.4
6.6
6.6
2.2
3.3
8.3
8.3
2.3
8 × 10
10 × 10
2.9
3.2
8.3
10.3
8.3
10.3
3.1
4.5
0.8 ... 1.1
B41112
Standard series 85 °C
Layout recommendation
Please read Cautions and warnings and
Important notes at the end of this document.
d × l (mm)
X
Y
a
4.0 × 5.4
1.6
2.6
1.0
5.0 × 5.4
1.6
3.0
1.4
6.3 × 5.4
1.6
3.5
2.1
6.3 × 5.8
1.6
3.5
2.1
6.3 × 7.7
1.6
3.5
2.1
8.0 × 6.2
2.5
4.0
2.1
8.0 × 10.0
2.5
3.5
3.0
10.0 × 10.0
2.5
4.0
4.0
Page 4 of 17
B41112
Standard series 85 °C
Overview of available types
VR (V DC)
4.0
6.3
10
16
25
Case dimensions d × l (mm)
CR (µF)
4
× 5.4
4
× 5.4
4
5
× 5.4
× 5.4
4.7
10
22
4
× 5.4
4
5
× 5.4
× 5.4
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
33
4
× 5.4
4
5
× 5.4
× 5.4
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
47
4
× 5.4
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
56
5
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 7.7
100
5
× 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.8
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
8 × 10
150
6.3 × 5.4
6.3 × 5.4
6.3 × 7.7
6.3 × 7.7
8
× 10
220
6.3 × 5.4
6.3 × 5.8
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
6.3 × 7.7
8 × 10
8
10
× 10
× 10
330
6.3 × 5.4
6.3 × 7.7
6.3 × 7.7
8 × 6.2
8
× 10
8
10
× 10
× 10
8
10
× 10
× 10
470
6.3 × 7.7
8
× 10
8
10
× 10
× 10
8
10
× 10
× 10
10
× 10
10
× 10
680
8
× 10
8
× 10
10
× 10
1000
8
× 10
8
10
× 10
× 10
10
× 10
1500
10
× 10
10
× 10
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 17
B41112
Standard series 85 °C
VR (V DC)
35
50
63
100
Case dimensions d × l (mm)
CR (µF)
0.10
4
× 5.4
4
× 5.4
0.22
4
× 5.4
4
× 5.4
0.33
4
× 5.4
4
× 5.4
0.47
4
× 5.4
4
× 5.4
1.0
4
× 5.4
4
× 5.4
2.2
4
× 5.4
4
× 5.4
3.3
4
× 5.4
4
× 5.4
6.3 × 7.7
8 × 6.2
× 5.4
× 5.4
4
× 5.4
6.3 × 7.7
8 × 10
6.3 × 7.7
8 × 10
4
× 5.4
4
5
10
4
5
× 5.4
× 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
22
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 10
33
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
8 × 10
8
× 10
47
6.3 × 5.4
6.3 × 7.7
8 × 6.2
6.3 × 7.7
8 × 10
10 × 10
8
× 10
56
6.3 × 7.7
8
× 10
8
× 10
100
6.3 × 7.7
8 × 10
10 × 10
8
10
× 10
× 10
10
× 10
4.7
150
8
× 10
10
× 10
220
8
10
× 10
× 10
10
× 10
330
10
× 10
Other voltage and capacitance ratings are available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
8
10
× 10
× 10
10
× 10
B41112
Standard series 85 °C
Technical data and ordering codes
VR
4
6.3
CR
120 Hz, 20 °C
µF
33
47
56
100
150
220
220
330
330
470
680
1000
1500
22
33
33
47
47
56
56
100
100
150
220
220
220
330
330
470
680
1000
1000
1500
Case dimensions
d×l
mm
4 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
6.3 × 5.4
6.3 × 7.7
6.3 × 7.7
8 × 10
8 × 10
10 × 10
4 × 5.4
4 × 5.4
5 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
8 × 10
8 × 10
8 × 10
10 × 10
10 × 10
Please read Cautions and warnings and
Important notes at the end of this document.
tan δmax
120 Hz, 20 °C
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.50
0.35
0.35
0.35
0.35
0.35
0.26
0.35
0.26
0.35
0.26
0.35
0.26
0.35
0.26
0.35
0.35
0.35
0.35
0.26
0.35
0.35
0.35
0.35
0.35
0.35
Page 7 of 17
IAC,R
120 Hz, 85 °C
mA
28
34
45
61
79
96
99
98
140
200
284
344
347
29
34
37
40
46
46
52
47
71
72
86
89
103
188
300
380
457
500
700
750
Ordering code
B41112A1336M000
B41112A1476M000
B41112A1566M000
B41112A1107M000
B41112A1157M000
B41112A1227M000
B41112B1227M000
B41112A1337M000
B41112B1337M000
B41112A1477M000
B41112A1687M000
B41112A1108M000
B41112A1158M000
B41112A2226M000
B41112A2336M000
B41112B2336M000
B41112A2476M000
B41112B2476M000
B41112A2566M000
B41112B2566M000
B41112A2107M000
B41112B2107M000
B41112A2157M000
B41112A2227M000
B41112B2227M000
B41112C2227M000
B41112A2337M000
B41112B2337M000
B41112A2477M000
B41112A2687M000
B41112A2108M000
B41112B2108M000
B41112A2158M000
B41112
Standard series 85 °C
Technical data and ordering codes
VR
10
16
CR
120 Hz, 20 °C
µF
22
22
33
33
47
47
56
56
100
100
100
150
220
220
330
470
470
680
1000
10
22
22
33
33
47
47
56
56
100
100
100
150
220
220
330
330
470
470
680
Case dimensions
d×l
mm
4 × 5.4
5 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.8
6.3 × 7.7
6.3 × 7.7
8 × 6.2
8 × 10
8 × 10
10 × 10
10 × 10
10 × 10
4 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
6.3 × 7.7
8 × 10
8 × 10
10 × 10
8 × 10
10 × 10
10 × 10
Please read Cautions and warnings and
Important notes at the end of this document.
tan δmax
120 Hz, 20 °C
0.30
0.20
0.30
0.20
0.30
0.26
0.30
0.26
0.30
0.26
0.26
0.26
0.20
0.26
0.26
0.26
0.26
0.26
0.26
0.16
0.26
0.16
0.26
0.16
0.26
0.16
0.26
0.20
0.26
0.26
0.20
0.26
0.26
0.20
0.20
0.20
0.20
0.20
0.20
Page 8 of 17
IAC,R
120 Hz, 85 °C
mA
30
33
34
43
47
52
50
57
54
76
78
142
173
250
390
390
400
481
580
28
30
39
44
49
52
70
57
63
86
89
200
135
162
280
320
380
350
420
505
Ordering code
B41112A3226M000
B41112B3226M000
B41112A3336M000
B41112B3336M000
B41112A3476M000
B41112B3476M000
B41112A3566M000
B41112B3566M000
B41112A3107M000
B41112B3107M000
B41112C3107M000
B41112A3157M000
B41112A3227M000
B41112B3227M000
B41112A3337M000
B41112A3477M000
B41112B3477M000
B41112A3687M000
B41112A3108M000
B41112A4106M000
B41112A4226M000
B41112B4226M000
B41112A4336M000
B41112B4336M000
B41112A4476M000
B41112B4476M000
B41112A4566M000
B41112B4566M000
B41112A4107M000
B41112B4107M000
B41112C4107M000
B41112A4157M000
B41112B4227M000
B41112A4227M000
B41112A4337M000
B41112B4337M000
B41112A4477M000
B41112B4477M000
B41112A4687M000
B41112
Standard series 85 °C
Technical data and ordering codes
VR
25
35
CR
120 Hz, 20 °C
µF
4.7
10
10
22
22
33
33
47
47
56
100
100
100
150
220
220
330
330
470
4.7
10
10
22
22
33
33
33
47
47
47
56
100
100
100
150
220
220
330
Case dimensions
d×l
mm
4 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
6.3 × 7.7
6.3 × 7.7
8 × 6.2
8 × 10
8 × 10
8 × 10
10 × 10
8 × 10
10 × 10
10 × 10
4 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 5.4
6.3 × 7.7
8 × 6.2
6.3 × 7.7
6.3 × 7.7
8 × 10
10 × 10
8 × 10
8 × 10
10 × 10
10 × 10
Please read Cautions and warnings and
Important notes at the end of this document.
tan δmax
120 Hz, 20 °C
0.14
0.20
0.14
0.20
0.14
0.20
0.14
0.20
0.20
0.20
0.14
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.12
0.16
0.12
0.16
0.12
0.16
0.16
0.14
0.16
0.16
0.14
0.16
0.16
0.14
0.14
0.14
0.14
0.14
0.14
Page 9 of 17
IAC,R
120 Hz, 85 °C
mA
22
24
28
38
55
46
65
70
72
107
143
145
180
192
232
310
284
340
393
22
24
30
39
60
60
61
130
70
77
165
98
132
175
210
214
246
310
350
Ordering code
B41112A5475M000
B41112A5106M000
B41112B5106M000
B41112A5226M000
B41112B5226M000
B41112A5336M000
B41112B5336M000
B41112A5476M000
B41112B5476M000
B41112A5566M000
B41112B5107M000
B41112C5107M000
B41112A5107M000
B41112A5157M000
B41112A5227M000
B41112B5227M000
B41112A5337M000
B41112B5337M000
B41112A5477M000
B41112A7475M000
B41112A7106M000
B41112B7106M000
B41112A7226M000
B41112B7226M000
B41112A7336M000
B41112B7336M000
B41112C7336M000
B41112A7476M000
B41112B7476M000
B41112C7476M000
B41112A7566M000
B41112C7107M000
B41112A7107M000
B41112B7107M000
B41112A7157M000
B41112A7227M000
B41112B7227M000
B41112A7337M000
B41112
Standard series 85 °C
Technical data and ordering codes
VR
50
CR
120 Hz, 20 °C
µF
0.1
0.22
0.33
0.47
1.0
2.2
3.3
4.7
4.7
10.0
10.0
22
22
22
33
33
33
47
47
47
56
100
100
150
220
Case dimensions
d×l
mm
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
5 × 5.4
5 × 5.4
6.3 × 5.4
6.3 × 5.4
6.3 × 5.8
8 × 6.2
6.3 × 7.7
8 × 6.2
8 × 10
6.3 × 7.7
8 × 10
10 × 10
8 × 10
8 × 10
10 × 10
10 × 10
10 × 10
Please read Cautions and warnings and
Important notes at the end of this document.
tan δmax
120 Hz, 20 °C
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.14
0.12
0.14
0.12
0.14
0.14
0.12
0.14
0.12
0.12
0.14
0.12
0.12
0.12
0.12
0.12
0.12
0.12
Page 10 of 17
IAC,R
120 Hz, 85 °C
mA
1
2
3
5
10
16
17
18
23
30
35
43
44
120
94
95
110
105
132
146
150
200
250
247
300
Ordering code
B41112A6104M000
B41112A6224M000
B41112A6334M000
B41112A6474M000
B41112A6105M000
B41112A6225M000
B41112A6335M000
B41112A6475M000
B41112B6475M000
B41112A6106M000
B41112B6106M000
B41112A6226M000
B41112B6226M000
B41112C6226M000
B41112B6336M000
B41112C6336M000
B41112A6336M000
B41112C6476M000
B41112A6476M000
B41112B6476M000
B41112A6566M000
B41112A6107M000
B41112B6107M000
B41112A6157M000
B41112A6227M000
B41112
Standard series 85 °C
Technical data and ordering codes
VR
63
100
CR
120 Hz, 20 °C
µF
0.1
0.22
0.33
0.47
1.0
2.2
3.3
4.7
10
10
22
22
33
47
56
100
3.3
3.3
4.7
4.7
10
10
22
22
33
Case dimensions
d×l
mm
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
4 × 5.4
6.3 × 5.4
6.3 × 5.8
6.3 × 7.7
8 × 10
8 × 10
8 × 10
8 × 10
10 × 10
6.3 × 7.7
8 × 6.2
6.3 × 7.7
8 × 10
6.3 × 7.7
8 × 10
8 × 10
10 × 10
10 × 10
Please read Cautions and warnings and
Important notes at the end of this document.
tan δmax
120 Hz, 20 °C
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
Page 11 of 17
IAC,R
120 Hz, 85 °C
mA
1
2.3
3.5
5
10
15
20
23
34
35
70
78
160
170
230
280
44
50
62
80
66
85
90
120
190
Ordering code
B41112A8104M000
B41112A8224M000
B41112A8334M000
B41112A8474M000
B41112A8105M000
B41112A8225M000
B41112A8335M000
B41112A8475M000
B41112A8106M000
B41112B8106M000
B41112B8226M000
B41112A8226M000
B41112A8336M000
B41112A8476M000
B41112A8566M000
B41112A8107M000
B41112A9335M000
B41112B9335M000
B41112A9475M000
B41112B9475M000
B41112B9106M000
B41112A9106M000
B41112A9226M000
B41112B9226M000
B41112A9336M000
B41112
Standard series 85 °C
Mounting instructions
Soldering
Recommended conditions
For reflow, use thermal conduction systems such as infrared radiation (IR) or hot blast. Vapor
heat transfer systems (VPS) are not recommended.
Observe proper soldering conditions (temperature, time, etc.).
Do not exceed the specified limits.
Temperature measuring method: Measure temperature in assuming quantitative production, by
sticking the thermo-couple to the capacitor upper part with epoxy adhesives.
Consult us for additional reflow restrictions.
Lead-free reflow
d (mm)
4 ... 6.3
8 ... 10
Peak temperature
250 °C
235 °C
Time in peak temperature
5s
5s
Time in 200 °C or more
60 s
60 s
Time of reflow
1 time
1 time
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B41112
Standard series 85 °C
Taping and packing
Taping of SMD capacitors
Case dimensions
d × l (mm)
W
P
F
A0
B0
T2
4 × 5.4
4 × 5.8
5 × 5.4
5 × 5.8
12.0
8.0
5.5
5.0
5.0
5.8
12.0
8.0
5.5
5.0
5.0
6.3
12.0
12.0
5.5
6.0
6.0
5.8
12.0
12.0
5.5
6.0
6.0
6.3
Case dimensions
d × l (mm)
W
P
F
A0
B0
T2
6.3 × 5.8
6.3 × 7.7
8 × 6.2
8 × 10
16.0
12.0
7.5
7.0
7.0
6.3
16.0
12.0
7.5
7.0
7.0
8.2
16.0
12.0
7.5
8.7
8.7
6.8
24.0
16.0
11.5
8.7
8.7
11.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
6.3 × 5.4
16.0
12.0
7.5
7.0
7.0
5.8
10 × 10
24.0
16.0
11.5
10.7
10.7
11.0
B41112
Standard series 85 °C
Reel packing
Capacitor dimensions
d × l (mm)
Quantity per reel
pcs.
4×l
2000 pcs.
5 × l, 6.3 × l, 8 × 6.2
1000 pcs.
8 × 10, 10 × l
500 pcs.
d × l (mm)
4 × l, 5 × l
6.3 × l, 8 × 6.2
8 × 10, 10 × l
A
14
18
26
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
B41112
Standard series 85 °C
Cautions and warnings
General
1
Aluminum electrolytic capacitors have a bi-polar structure. This is marked on the body of the
capacitor. A capacitor must not be mounted with reversed polarity. The application of an AC
or reverse voltage may cause a short circuit or damage the capacitor. Bi-polar capacitors
must not be used in AC applications, where the polarity may be reversed in the circuits or is
unknown.
2
The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage,
as this will result in a rapid increase of the leakage current and may damage the capacitor. It
is recommended to operate the capacitor at 70 – 80% of its rated voltage to optimize its
service life.
3
The ripple current applied to the capacitor must be within the permitted range. An excessive
ripple current leads to impaired electrical properties and may damage the capacitor. Note
that the sum of the peak values of the ripple voltage and the DC operating voltage must not
exceed the rated DC voltage.
4
Capacitors must be used within their permitted range of operating temperature. Operation at
room temperature optimizes their service life.
5
Capacitors with case diameter ≥8 mm are equipped with a safety vent. In capacitors fitted
with a lead or soldering lug, the safety vent is usually located at the base of the case. It
needs sufficient space around it to operate optimally. The following dimensions are
recommended: for case diameter d = 8 to 16 mm, more than 2 mm; for d = 18 to 35 mm,
more than 3 mm; and for d = 42 mm or more, more than 5 mm.
6
Capacitors should not be mounted with the safety vent face down on the board. Do not
locate any wire or copper trace near the safety vent. Do not reverse the voltage, as this may
result in excess pressure and the leakage of electrolyte.
7
Gas is released through the safety vent when the pressure inside the capacitor is too high. A
gaseous liquid around the safety vent does not indicate a leakage of electrolyte.
8
The capacitor should be stored under conditions of normal temperature and in a non-acid,
non-alkali environment of normal humidity. Exposure to high temperatures, for example
under direct sunlight, will reduce its operating life. If the capacitor is stored in an environment
containing acids or alkalis, the solderability of the leads may be affected.
9
containing acids or alkalis, the solderability of the leads may be affected.The leakage current
of an aluminum electrolytic capacitor may increase after a long period of storage. After such
storage, the capacitor must be aged by applying the rated operating voltage for 6 – 8 hours
before use.
10
Manual soldering:
a Soldering must be performed within the specified conditions.
Bit temperature: 350 °C; application time of soldering iron: 3 seconds.
b Ensure that the soldering iron does not touch any part of the capacitor body.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 17
B41112
Standard series 85 °C
11
Do not apply excessive force to the leads and terminals. Do not move the capacitor after
soldering it onto the PC board and do not carry the PC board by gripping the capacitor.
Observe the following rules to prevent undue stress to the capacitor:
a Do not tilt or bend the capacitor after soldering.
b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board.
12
The aluminum case is not insulated from the cathode. Do not place a conductor under the
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink
sleeve to ensure safe usage.
13
The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 17 of 17
Similar pages