Marketing Bulletin DATE: January 15th, 2007 TO: All Sales Personnel FROM: Isaac Gonzalez RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective January 15th, 2008: Series ECCM5B Description 3.5x6.0mm Ceramic 2Pad SMD Crystal Recommended Replacement ECCM5A In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after January 1st, 2009, with delivery to conclude by April 1st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 ECCM5B Series ECCM5B • RoHS Compliant (Pb-Free) • Miniature two pad ceramic surface mount package • AT cut • Tight tolerance/stability • Frequencies to 32.000MHz available • Tape and reel available NOTES H L W 1.0 6.0 3.5 CRYSTAL OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 11.0592MHz to 32.000MHz Frequency Tolerance ±30ppm, or ±50ppm Frequency Stability Per Table 1 Operating Temperature Range Per Table 1 Aging (at 25°C) ±2ppm / year Maximum Storage Temperature Range -40°C to 85°C Shunt Capacitance 5pF Maximum Insulation Resistance 500 Megaohms Minimum at 100VDC Drive Level 100 µWatts Maximum Load Capacitance (CL) 18pF (Standard), CL ≥10pF, or Series Resonant Spurious Response -3dB Minimum; F0 to F0 +5000ppm EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range Mode / Cut ESR (Ω) 11.0592MHz to 24.000MHz 50 Maximum Fundamental / AT 24.001MHz to 32.000MHz 40 Maximum Fundamental / AT MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL ECCM5B CERAMIC CR39 09/03 800-ECLIPTEK www.ecliptek.com for latest revision 38 Specifications subject to change without notice. PART NUMBERING GUIDE ECCM5B 5 D C - 20 - 32.000M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY TOLERANCE (AT 25°C) 5=±30ppm, 6=±50ppm FREQUENCY FREQUENCY STABILITY D=±20ppm, E=±30ppm, F=±50ppm LOAD CAPACITANCE Blank=18pF (Standard) S=Series, XX=XXpF (Custom) OPERATING TEMPERATURE RANGE Per Table 1 OBSOLETE MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pad 1: Input/Output Pad 2: Input/Output TAPE AND REEL DIMENSIONS Tolerance = +0.2 ALL DIMENSIONS IN MILLIMETERS A B C D E 16±.3 7.5±.1 6.75±.2 4 ±.1 2±.05 TAPE M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL F G H J K L R S T U V 8±.1 3.9±.1 1.5±.1 6.4±.1 .3 ±.05 1.3±.1 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 *Compliant to EIA-481A Line 1: E XX.XX Frequency in MHz (4 Digits Maximum + Decimal) Line 2: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL ECCM5B CERAMIC CR39 09/03 800-ECLIPTEK www.ecliptek.com for latest revision 39 Specifications subject to change without notice.