XP Power AG02 Isolated, proportional dc to hv dc converter Datasheet

Proven
Reliabilit y
AG SERIES
ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
100V to 6000V @ 1.0 and 1.5 Watts
Extremely Low Profile: 0.128 inches
and volume of < 0.100 cubic inches
PRODUCT SELECTION TABLE
*5
VDC
UL
NOW
IZED
N
G
O
REC
PRODUCT DESCRIPTION
The AG Series is a new line of ultra-miniature DC to HV DC converters
that set an industry standard in high voltage miniaturization. These
component-sized converters are ideal for applications requiring minimal size and weight. Occupying less than one tenth of a cubic inch
of volume*5, this unique package features an extremely low profile of
only 0.128 inches (3.25mm) when mounted in from the top, or 0.152
(3.86mm) when mounted in from the bottom of the PCB! The AG Series
converter can also mount off the PCB with .030” diameter pins. See
page 9 for illustrations. Controllable output voltages range from 100
volts to 6000 volts. Please refer to the A Series data sheet for PCB
pin mounting.
1.5 WATT OPTION AGH MODEL
STANDARD 1 WATT AG MODEL
MODEL
MAXIMUM
OUTPUT
CURRENT*1
MODEL
MAXIMUM
OUTPUT
CURRENT*1
100 VDC
AG01
10 mA
AGH01*7
15 mA
200 VDC
AG02
5 mA
AGH02
7.5 mA
250 VDC
AG025
4 mA
AGH025
6 mA
300 VDC
AG03
3.33 mA
AGH03
5mA
400 VDC
AG04
2.5 mA
AGH04
3.75 mA
500 VDC
AG05
2 mA
AGH05
3 mA
600 VDC
AG06
1.67 mA
AGH06
2.5 mA
700 VDC
AG07
1.43 mA
AGH07
2.15 mA
800 VDC
AG08
1.25 mA
AGH08
1.87 mA
900 VDC
AG09
1.1 mA
AGH09
1.67 mA
1000 VDC
AG10
1 mA
AGH10
1.5 mA
1200 VDC
AG12
0.83 mA
AGH12
1.25 mA
1500 VDC
AG15
0.66 mA
AGH15
1 mA
2000 VDC
AG20
0.5 mA
AGH20
0.75 mA
3000 VDC
AG30
0.32 mA
AGH30
0.5 mA
4000 VDC
AG40
0.24 mA
–
–
5000 VDC
AG50
0.2 mA
–
–
6000 VDC
AG60
0.167 mA
AGH60
0.25 mA
Complete List of Models on page 2
APPLICATIONS
Avalanche Photodiodes
Capacitor Charging
Electrophoresis
Photomultiplier Tubes
Piezo Devices
Mass Spectrometry
Sustaining Ion Pumps
OPTIONS
1 Watt and 1.5 Watt Versions Available (AG/AGH)
Available in 3 Standard Input Voltage Ranges: 0 to 5, 12 or 24VDC (up to 3 kV)
Polarity: Choose Positive or Negative Output (P/N)
Extended Operating Temperature (AG Models / 1.0W) (T Suffix)
Alternate Input / Output Voltages (Consult Factory)
See Ordering Information (Page 12)
WWW.XPPOWER.COM
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
Proportional Input/Output
Low Noise Quasi-sinewave Oscillator
Control Pin (can be used for on/off control)
Low Leakage Current
Low Input/Output Capacitance
Input to Output Galvanic Isolation
Short Circuit Protection, 1 Minute Minimum
No Minimum Load Required*2
MTBF > 1,862,000 hours, per Bellcore TR 332
Surface Mount Package
No external components required
RoHS Compliant
UL Recognized
E344664
4718L02
PAGE 1
AG SERIES
ELECTRICAL SPECIFICATIONS*3
STANDARD 1 WATT - AG MODEL
OUTPUT VOLTAGE*
2
1.5 WATT OPTION - AGH MODEL
(To select polarity, see pg. 12 - How to Order)
MODEL
MAXIMUM
OUTPUT
CURRENT*1
RIPPLE
P-P*4
MODEL
MAXIMUM
OUTPUT
CURRENT*1
RIPPLE
P-P*4
0 to 100 VDC
AG01
10 mA
5%
AGH01*7
15 mA
4%
0 to 200 VDC
AG02
5 mA
1%
AGH02
7.5 mA
3%
0 to 250 VDC
AG025
4 mA
.90%
AGH025
6 mA
1.2%
0 to 300 VDC
AG03
3.33 mA
.70%
AGH03
5 mA
.70%
0 to 400 VDC
AG04
2.5mA
.50%
AGH04
3.75 mA
.75%
0 to 500 VDC
AG05
2 mA
.50%
AGH05
3 mA
.70%
0 to 600 VDC
AG06
1.67 mA
1%
AGH06
2.5 mA
2%
0 to 700 VDC
AG07
1.43 mA
.50%
AGH07
2.15 mA
1.2%
0 to 800 VDC
AG08
1.25 mA
1%
AGH08
1.87 mA
1.2%
0 to 900 VDC
AG09
1.1 mA
1%
AGH09
1.67 mA
1.2%
0 to 1000 VDC
AG10
1 mA
.79%
AGH10
1.5 mA
1%
0 to 1200 VDC
AG12
0.83 mA
.50%
AGH12
1.25 mA
.60%
0 to 1500 VDC
AG15
0.67 mA
.40%
AGH15
1 mA
.60%
0 to 2000 VDC
AG20
0.5 mA
.30%
AGH20
0.75 mA
.50%
0 to 3000 VDC
AG30
0.33 mA
.20%
AGH30
0.5 mA
.20%
0 to 4000 VDC
AG40
0.25 mA
.12%
–
–
–
0 to 5000 VDC
AG50
0.2 mA
.15%
–
–
–
0 to 6000 VDC
AG60
0.167 mA
.15%
AGH60
0.25 mA
.25%
INPUT CURRENT
AG MODELS - 1 Watt
AGH MODELS - 1.5 Watt
VIN
NO-LOAD
FULL-LOAD
NO-LOAD
FULL-LOAD
5 VDC
<200mA
<470mA
<300mA
<550mA
12 VDC
<100mA
<185mA
<125mA
<250mA
24 VDC
<25mA
<60mA
<40mA
<120mA
WWW.XPPOWER.COM
4718L02
PAGE 2
AG SERIES
ELECTRICAL SPECIFICATIONS*3
PARAMETER
VALUE
0 TO 5, 12, OR 24V (FOR MODELS UP TO 3KV)
INPUT VOLTAGE
0 TO 5V (FOR MODELS OVER 3KV)
TURN-ON VOLTAGE
<0.7 VDC
ISOLATION
< +/- 500V BIAS ON PIN 4
OUTPUT VOLTAGE TOLERANCE
+10%, -10% FULL LOAD, MAX. INPUT VOLTAGE
INPUT/OUTPUT COUPLING CAPACITANCE
<250 pf TYPICAL
INPUT/OUTPUT LEAKAGE CURRENT
<100 nA TYPICAL
CONTROL PIN
0 TO MAX INPUT VOLTAGE
INTERNAL OSCILLATOR FREQUENCY
50kHz - 350kHz
OPERATING: -25° TO +75°C*6 (CASE)
STANDARD TEMPERATURE RANGES
STORAGE: -55° TO +105°C
EXTENDED TEMPERATURE RANGES (-T OPTION)
OPERATING: -55° TO +85°C*6 (CASE) (AG Models/1.0W)
STORAGE: -55° TO +105°C
DETAILED PRODUCT DESCRIPTION
The AG Series is a new line of ultra-miniature, DC to HV DC converters that set an industry standard in high voltage miniaturization. These
component-sized converters are ideal for applications requiring minimal
size and weight. Occupying less than one tenth of a cubic inch of volume*5,
this unique package features an extremely low profile of only 0.128 inches
(3.25mm) when mounted in from the top, or 0.152 (3.86mm) when mounted
in from the bottom of the PCB! The AG Series converter can also mount off
the PCB with .030” diameter pins. See page 9 for illustrations. Controllable
output voltages range from 100 volts to 6000 volts.
Turn-on voltage is very low at less than 0.7 volts, allowing for wide output
voltage operating range. Use of a resonant, quasi-sinewave oscillator and
fully shielded transformer result in clean, reliable high voltage conversion
with inherently low ripple, EMI/RFI and input ripple current, making this
product ideal for integration into noise sensitive equipment.
Output power is 1 watt standard, with 1.5 watts available as an option. No
minimum load is required. A proprietary vacuum encapsulation process and
custom 94V-0 listed, high performance formula are used to achieve excellent
high voltage and thermal properties. Isolation is +/- 500V bias on the output
return. Input to output leakage current is very low at less than 100 nA and
coupling capacitance is also low at <250 pF.
The AG Series leverages XP EMCO’s Best-in-Class long-term reliability, utilizing proven DC to high voltage DC conversion technology,
perfected by over four decades of high voltage design experience
in the most demanding applications. Our extensive in-house capabilities enable us to meet specific customer requirements with standard,
modified and custom solutions quickly, easily, and economically. Technical
assistance is readily available.
A separate high impedance control pin is standard and is designed for
external error amplifier and/or DAC control in closed or open loop systems,
or simply connect the control pin to the + input for proportional input to
output operation (see performance charts below).
WWW.XPPOWER.COM
4718L02
PAGE 3
AG SERIES & AGH SERIES
MECHANICAL SPECIFICATIONS (100V - 2,000V)
TOP VIEW
RECOMMENDED
PCB LAYOUT
TOP VIEW
AG Series
BOTTOM VIEW
DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS)
DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127)
PARAMETER
VALUE
PIN #
FUNCTION
WEIGHT
< 0.20 OZ. (5.66 GRAMS)
1
(–) INPUT
VOLUME
< 0.10 CUBIC INCHES (1.639 CUBIC CENTIMETERS)
2
(+) INPUT
BODY DIMENSIONS
0.92L (23.37L) x 0.45W (11.43W) x 0.25H (6.35H)
3
HV OUT
BODY + WING
DIMENSIONS
0.92L (23.37L) x 0.69W (17.53W) x 0.25H (6.35H)
4
HV RTN
5
CONTROL
WWW.XPPOWER.COM
4718L02
PAGE 4
AG SERIES & AGH SERIES
MECHANICAL SPECIFICATIONS (3,000V – 5,000V)
TOP VIEW
RECOMMENDED
PCB LAYOUT
TOP VIEW
AG Series
BOTTOM VIEW
DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS)
DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127)
PARAMETER
VALUE
PIN #
FUNCTION
WEIGHT
0.25 OZ. (7.09 GRAMS)
1
(–) INPUT
VOLUME
<0.125 CUBIC INCHES (2.048 CUBIC CENTIMETERS)
2
(+) INPUT
BODY DIMENSIONS
1.13L (28.70L) x 0.45W (11.43W) x 0.25H (6.35H)
3
HV OUT
BODY + WING
DIMENSIONS
1.13L (28.70L) x 0.69W (17.53W) x 0.25H (6.35H)
4
HV RTN
5
CONTROL
WWW.XPPOWER.COM
4718L02
PAGE 5
AG SERIES & AGH SERIES
MECHANICAL SPECIFICATIONS (6,000V)
TOP VIEW
RECOMMENDED
PCB LAYOUT
TOP VIEW
AG Series
BOTTOM VIEW
DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS)
DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127)
PARAMETER
VALUE
PIN #
FUNCTION
WEIGHT
0.3 OZ (8.51 GRAMS)
1
(–) INPUT
VOLUME
<0.156 CUBIC INCHES (2.556 CUBIC CENTIMETERS)
2
(+) INPUT
BODY DIMENSIONS
1.32L (33.53L) x 0.45W (11.43W) x 0.25H (6.35H)
3
HV OUT
BODY + WING
DIMENSIONS
1.32L (33.53L) x 0.69W (17.53W) x 0.25H (6.35H)
4
HV RTN
5
CONTROL
WWW.XPPOWER.COM
4718L02
PAGE 6
AG SERIES
AG INSTALLATION
AG Mounted
on Top of PCB
AG Mounted
From Bottom
of PCB
AG Mounted Off
PCB With .030”
DIA Pins
*Height of pin can vary depending upon application
WWW.XPPOWER.COM
4718L02
PAGE 7
AG SERIES
AG RoHS REFLOW PROFILE
Reflow Results
Probe
(°C) Module Lead Top
Positive
Slope
(°C/sec)
Positive
Slope Time
(mm:ss.tt)
Rise Time
(120.0 - 180.0°C)
(mm:ss.tt)
Mean Slope
to Peak
(°C/sec)
Time Above
Liquidus
(217.0°C)
(mm:ss.tt)
Peak
Temperature
(°C)
Negative
Slope
(°C/sec)
2.62
03:43.50
01:17.00
0.77
00:44.00
237.5
-2.59
Maximum / Minimum
Probe
(°C) Module Lead Top
Maximum
(°C)
Max. Reached
(mm:ss.tt)
Mean
(°C)
Deviation from
255.0°C
Standard
deviation
Minimum
(°C)
Min. Reached
(mm:ss.tt)
237.5
04:18.00
139.8
-17.5
56.5
38.5
00:00.00
Time at Temperature
Probe
(°C) Module Lead Top
Slopes
Time Above 230.0°C
(mm:ss.tt)
Time to Reach 230.0°C
(mm:ss.tt)
Positive Slope
(°C/sec)
Mean Slope
(°C/sec)
00:16.00
04:09.50
2.62
0.38
*Reflow profile is subject to change based on your application
WWW.XPPOWER.COM
4718L02
PAGE 8
AG SERIES
APPLICATION NOTES
Typical HV Output vs. Control Voltage
300
Full Load Output
No Load Output (AG)
No Load Output (AGH)
Safe Operating Limit
250
% HV Output
200
150
100
50
0
0
10
20
30
40
50
60
70
80
90
100
% Control Voltage
NOTE: Vin held at maximum
TYPICAL INPUT vs. OUTPUT VOLTAGE
100
loaded
unloaded (AG)
90
unloaded (AGH)
80
% OUTPUT VOLTAGE
70
60
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
90
100
% INPUT VOLTAGE
NOTE: Control Pin tied to Vin Pin
Output Voltage is load dependent. Under light or no-load conditions, reduce
the Input Voltage so maximum rated Output Voltage is not exceeded.
WWW.XPPOWER.COM
4718L02
PAGE 9
AG SERIES
OPTION CODES
ORDERING INFORMATION
OUTPUT VOLTAGE
POLARITY DESIGNATOR
INPUT VOLTAGE
OPTIONS
ORDER CODE
AVAILABILITY
1 WATT
AG
ALL
1.5 WATT
AGH
ALL
POSITIVE OUTPUT
P
ALL
NEGATIVE OUTPUT
N
ALL
5 VDC
5
ALL/Except AGH01 Model
12 VDC
12
UP TO 3KV
24 VDC
24
UP TO 3KV
EXTENDED TEMP
T
AG MODELS/1W
HOW TO ORDER
PART NUMBER SELECTOR:
Model Number:
AG 20 N - 12 T
T - Extended Operating Temperature
12 - Input Voltage
N - Polarity Designator
AG - Model
20 - Output Voltage/100 (See table)
EXAMPLE: AG20N-12T (AG - Model, 20 - Output Voltage, N - Negative, 12 - Input Voltage, T - Extended Operating Temperature)
*Note:
1. At maximum rated output voltage.
2. Output Voltage is load dependent. Under light or no-load conditions, reduce the Input Voltage so maximum rated Output Voltage is not exceeded.
3. Specifications after 30 minute warm-up, full-load, at 25ºC, unless otherwise noted.
4. Ripple may be reduced substantially by the addition of an external RC filter.
5. Volume will vary depending on package size.
6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output.
7. The AGH01 is only available in 12V or 24V.
XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product
changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details.
WWW.XPPOWER.COM
4718L02
PAGE 10
Similar pages