MACOM A1211 10 to 1200 mhz cascadable amplifier Datasheet

A1211/SMA1211
10 TO 1200 MHz
CASCADABLE AMPLIFIER
· HIGH EFFICIENCY: 16 mA at +5 Vdc
· LOW NOISE FIGURE: 2.8 dB at 5 Vdc (TYP.)
· LOW CURRENT DRAIN: 15.5 mA at 5 Vdc
· MEDIUM OUTPUT POWER: +11 dBm at 8 Vdc (TYP.)
· MEDIUM THIRD I.P.: +25 dBm at 8 Vdc
Specifications (Rev. Date: 6/01)*
Characteristics
Typical
Frequency
Small Signal Gain (min.)
Gain Flatness (max.)
Reverse Isolation
Noise Figure (max.)
Power Output @ 1 dB comp. (min.)
IP3
IP2
Second Order Harmonic IP
VSWR Input / Output (max.)
DC Current @ 5 Volts (max.)
Guaranteed
0°° to 50°°C
-54°° to +85°°C
5-1300 MHz 10-1200 MHz 10-1200 MHz
14.0 dB
12.0 dB
12.5 dB
±0.6 dB
±0.3 dB
±0.8 dB
16 dB
2.8 dB
4.0 dB
3.5 dB
4.5 dBm
6.0 dBm
5.0 dBm
+20 dBm
+27 dBm
+33 dBm
1.4:1 / 1.4:1 1.9:1 / 1.9:1 2.0:1 / 2.0:1
15.5 mA
19 mA
18 mA
* Measured in a 50-ohm system at +5 Vdc Nominal. Subject to change without notice.
Absolute Maximum Ratings
Storage Temperature
Max. Case Temperature
Max. DC Voltage
Max. Continuous RF Input Power
Max. Short Term RF Input Power (1 minute max.)
Max. Peak Power (3 µsec max.)
“S” Series Burn-in Temperature (Case)
-62° to +125°C
125°C
+10 Volts
+10 dBm
50 mW
0.5 W
125°C
Thermal Data: Vcc = 5 Vdc
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise Above Case Tjc
184°C/W
0.051 W
9°C
Outline Drawings
Package
Figure
Model
TO-8
BG
A1211
Surface Mount
AA
SMA1211
SMA Connectorized
CE
CA1211
Specifications subject to change without notice. • North America: 1-800-366-2266
Visit www.macom.com for complete contact and product information.
Typical Performance @ 25°C
Similar pages