Kingbright AM2520SGC08 Subminiature solid state lamp Datasheet

SUBMINIATURE SOLID STATE LAMP
AM2520SGC08
Features
SUPER BRIGHT GREEN
Description
SUBMINIATURE PACKAGE.
The Super Bright Green source color devices are made
WIDE VIEWING ANGLE.
with Gallium Phosphide Green Light Emitting Diode.
YOKE LEAD.
LONG LIFE - SOLID STATE RELIABILITY.
LOW PACKAGE PROFILE.
PACKAGE : 1000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD1275
REV NO: V.2
DATE:JAN/14/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP:1202000633
Selection Guide
Part No.
Dice
AM2520SGC08
Iv (mcd)
@ 20mA
Lens Type
SUPER BRIGHT GREEN (GaP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2 θ 1/2
36
80
20°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Green
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
565
nm
IF=20mA
Super Bright Green
568
nm
IF=20mA
Spectral Line Half-width
Super Bright Green
30
nm
IF=20mA
C
Capacitance
Super Bright Green
15
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Green
2.2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Green
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
Power dissipation
105
mW
DC Forward Current
25
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1275
REV NO: V.2
DATE:JAN/14/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP:1202000633
Super Bright Green
AM2520SGC08
SPEC NO: DSAD1275
REV NO: V.2
DATE:JAN/14/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP:1202000633
AM2520SGC08
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1275
REV NO: V.2
DATE:JAN/14/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP:1202000633
Similar pages