AZETTLER AZ725 Miniature power relay Datasheet

AZ725
MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Dielectric strength 5000 Vrms
20 Amp switching — single pole contacts
Isolation spacing greater than 8mm
Molded materials: all 94 V–0
VDE 6010 - unsealed version only
Sealed version available
UL, CUR file E43203
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 480 W or 5000 VA
Max. switched current: 20 A
Max. switched voltage: 150* VDC or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL
20 A at 250 VAC resistive
Material
Silver cadmium oxide
Resistance
< 30 milliohms initially
COIL
Power
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 107
1 x 105 at 16 A 240 VAC Res.
Operate Time (typical)
7 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 130°C (266°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
At Pickup Voltage
(typical)
270 mW
Terminals
Tinned copper alloy
Max. Continuous
Dissipation
2.6 W at 20°C (68°F) ambient
2.0 W at 40°C (104°F) ambient
Max. Solder Temp.
270°C (518°F)
Temperature Rise
32°C (58°F) nominal coil voltage
Max. Solder Time
5 seconds
Max. 130°C (266°F)
Max. Immersion Time
30 seconds
Max. Solvent Temp
80°C (176°F)
Weight
19 grams
Temperature
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/16/05W
AZ725
RELAY ORDERING DATA
COIL SPECIFICATIONS — DC Coil
Nominal Coil
VDC
5
Must Operate
VDC
3.5
Max. Continuous
VDC
11.3
ORDER NUMBER*
Nominal
mA ± 10%
102.0
Coil Resistance
±10%
49
Form A
(SPST)
AZ725–1A–5D
Form C
(SPDT)
AZ725–1C–5D
6
4.2
13.3
88.21
68
AZ725–1A–6D
AZ725–1C–6D
12
8.4
26.0
46.2
260
AZ725–1A–12D
AZ725–1C–12D
24
16.8
53.5
21.8
1,100
AZ725–1A–24D
AZ725–1C–24D
48
33.6
107.0
10.9
4,400
AZ725–1A–48D
AZ725–1C–48D
60
42.0
135.0
8.6
7,000
AZ725–1A–60D
AZ725–1C–60D
*Add suffix “E” for epoxy sealed version
.
HARDWARE ORDERING DATA
DESCRIPTION
ORDER NUMBER
Socket
ST484–U1
Retaining Clip
ST482–2
MECHANICAL DATA
.045
(1.1) TYP
HARDWARE
PC BOARD LAYOUT
.500
(12.7)
.177
(4.5)
MAX
.493
(12.5)
.354
(9.0)
.197 (5)
.197 (5)
.051 DIA
(1.3)
(8 HOLES)
1.14 MAX
(29)
1.28
(32.5)
1.22
(30.9)
.590
(15)
.414
(10.5)
.016
(0.4) TYP
.366
(9.3)
.125 DIA
(0.5)
.115 (2.9)
.295
(7.5)
.197
(5)
1.10 MAX
(27.9)
PC BOARD LAYOUT
Viewed toward terminals
.295
(7.5)
WIRING DIAGRAMS
1 FORM A
(SPST-NO)
8
7
RETAINING CLIP
.197
(5.0)
1.217
(30.9)
.158
(4.0)
1 FORM C
(SPDT)
5
4
8
5
7
4
6
3
.197
(5.0)
.590 (15)
.059 DIA
(1.5)
.118
(3.0)
1.044
(26.5)
.138 (3.5)
Viewed toward terminals
1
2
1
2
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
5/16/05W
Similar pages