STEALTHTM II Rectifier FFPF08S60SN tm Features 8A, 600V STEALTHTM II Rectifier • High Speed Switching, trr < 25ns @ IF = 8A The FFPF08S60SN is STEALTHTM II rectifier with soft recovery characteristics. It is silicon nitride passivated ion-implanted epitaxial planar construction. • High Reverse Voltage and High Reliability This device is intended for use as freewheeling of boost diode in switching power supplies and other power swithching applications. Their low stored charge and hyperfast soft recovery minimize ringing and electrical noise in many power switching circuits reducing power loss in the switching transistors. • RoHS compliant Applications • General Purpose • Switching Mode Power Supply • Boost Diode in continuous mode power factor corrections • Power switching circuits TO-220F-2L 1. Cathode 2. Anode 1. Cathode 2. Anode Absolute Maximum Ratings TC = 25oC unless otherwise noted Symbol VRRM Peak Repetitive Reverse Voltage VRWM VR IF(AV) Average Rectified Forward Current IFSM Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave TJ, TSTG Parameter Ratings 600 Units V Working Peak Reverse Voltage 600 V DC Blocking Voltage 600 V 8 A @ TC = 60oC 60 Operating and Storage Temperature Range A o -65 to +150 C Thermal Characteristics Symbol RθJC Parameter Ratings Maximum Thermal Resistance, Junction to Case Units o 6.8 C/W Package Marking and Ordering Information Device Marking Device Package Reel Size Tape Width Quantity F08S60SN FFPF08S60SNTU TO220F-2L - - 50 ©2008 Fairchild Semiconductor Corporation FFPF08S60SN Rev. A 1 www.fairchildsemi.com FFPF08S60SN May 2008 Symbol Min. Typ. Max. Units VFM1 IF = 8A IF = 8A Parameter TC = 25oC TC = 125oC - 2.7 2.1 3.4 - V IRM1 VR = 600V VR = 600V TC = 25oC TC = 125oC - - 100 500 μA trr IF = 1A, di/dt = 100A/μs, VR = 30V TC = 25oC - 13 - ns - 15 2.5 0.4 19 25 - ns A - 32 3.8 0.7 62 - nC 10 - - mJ trr Irr S factor Qrr IF = 8A, di/dt = 200A/μs, VR = 390V trr Irr S factor Qrr IF = 8A, di/dt = 200A/μs, VR = 390V WAVL Avalanche Energy ( L = 40mH) o TC = 25 C TC = 125oC nC ns A Notes: 1: Pulse: Test Pulse width = 300μs, Duty Cycle = 2% Trr test circuit and waveform Avalanch energy test circuit and waveform FFPF08S60SN Rev. A 2 www.fairchildsemi.com FFPF08S60SN Electrical Characteristics TC = 25oC unless otherwise noted FFPF08S60SN Typical Performance Characteristics Figure 2. Typical Reverse Current vs. Reverse Voltage Figure 1. Typical Forward Voltage Drop vs. Forward Current 20 40 10 10 o TC = 125 C TC = 125 C Reverse Current , IR [μA] Forward Current, IF [A] o o TC = 75 C 1 o TC = 25 C 1 o TC = 75 C 0.1 0.01 o TC = 25 C 0.1 0 1 2 3 4 Forward Voltage, VF [V] 5 Figure 3.Typical Junction Capacitance 0.001 Reverse Recovery Time, trr [ns] Capacitances , Cj [pF] 30 20 10 1 10 Reverse Voltage, VR [V] o o TC = 75 C 20 o TC = 25 C 200 300 400 di/dt [A/μs] 500 600 Figure 6. Forward Current Derating Curve 10 12 Average Forward Current, IF(AV) [A] Reverse Recovery Current, Irr [A] 600 TC = 125 C 30 10 100 100 Figure 5. Typical Reverse Recovery Current vs. di/dt 8 o TC = 125 C 4 o TC = 75 C o TC = 25 C 2 FFPF08S60SN Rev. A 500 IF = 8A 40 0 100 200 300 400 Reverse Voltage, VR [V] 40 Typical Capacitance at 0V = 43 pF 6 100 Figure 4. Typical Reverse Recovery Time vs. di/dt 50 0 0.1 10 9 6 3 IF = 8A 200 300 400 di/dt [A/μs] 500 0 25 600 3 50 75 100 125 o Case temperature, TC [ C] 150 www.fairchildsemi.com TO220F 2L ø3.18 ±0.10 2.54 ±0.20 3.30 ±0.10 10.16 ±0.20 MAX1.47 15.87 ±0.20 (1.80) (6.50) (1.00x45°) 12.00 ±0.20 9.75 ±0.30 15.80 ±0.20 6.68 ±0.20 (0.70) 2.76 ±0.20 0.80 ±0.10 0.35 ±0.10 2.54TYP [2.54 ±0.20] 9.40 ±0.20 +0.10 0.50 –0.05 4.70 ±0.20 2.54TYP [2.54 ±0.20] Dimensions in Millimeters FFPF08S60SN Rev. A 4 www.fairchildsemi.com FFPF08S60SN Mechanical Dimensions The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidianries, and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ™ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 ® tm SupreMOS™ SyncFET™ ® The Power Franchise® tm TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 FFPF08S60SN Rev. A 5 www.fairchildsemi.com FFPF08S60SN TRADEMARKS