AZETTLER AZ2280-1A-24DF 30 amp miniature power relay Datasheet

AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Quick-connect leads for contacts and coil
1 Form A, B and C contacts available
AC and DC coils available
Expoxy sealed versions available
UL Class F (155°C) standard
UL, CUR file E44211
TÜV pending
GENERAL DATA
CONTACTS
Arrangement
Ratings
SPST (1 Form A, or B)
SPDT (1 Form C)
Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A (Form A)
15 A (Form B)
Max. switched voltage: 277 VAC, 28 VDC
UL, CUR
1 Form A
30 A at 277 VAC, General Use [1][2]
2 Hp at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
30 A at 28 VDC [1]
20/60 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form B
15 A at 277 VAC, General Use [1]
10 A at 28 VDC [1]
0.5 HP at 250 VAC [1]
0.25 HP at 125 VAC [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form C
30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2]
20/10 A (N.O./N.C.) at 28 VDC[1]
2/0.5 HP (N.O./N.C.) at 250 VAC[1][2]
1/0.25 HP (N.O./N.C.) at 125 VAC[1][2]
20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1]
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. N.O.
Operate Time
15 ms at nominal coil voltage
Release Time
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
Insulation Resistance
1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-55°C (-67°F) to 85°C (185°F)
-55°C (-67°F) to 155°C (311°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp.
270°C (518°F)
Material
Silver cadmium oxide [1], silver tin oxide [2]
Max. Solder Time
5 seconds
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
36 grams
COIL
Power
At Pickup Voltage
(typical)
DC: 500 mW
AC: 1.4 VA
Max. Continuous
Dissipation
DC: 1.7 W at 20°C (68°F)
AC: 2.7 VA at 20°C (68°F)
Temperature Rise
38°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
Max. 155°C (311°F)
3. Specifications subject to change without notice.
Temperature
NOTES
1. All values at 20°C (68°F).
6/13/06W
AZ2280
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil
VDC
5
Must Operate
VDC
3.75
Max. Continuous
VDC
6.4
Nominal Current
mA ± 10%
185
Coil Resistance
± 10%
27
ORDER NUMBER*
AZ2280–1A–5DF
6
4.50
7.8
150
40
AZ2280–1A–6DF
9
6.75
12.2
93
97
AZ2280–1A–9DF
12
9.00
15.4
77
155
AZ2280–1A–12DF
15
11.25
19.8
59
256
AZ2280–1A–15DF
18
13.5
24.1
47
380
AZ2280–1A–18DF
24
18.00
32.0
36
660
AZ2280–1A–24DF
48
36.00
62.6
19
2560
AZ2280–1A–48DF
82.5
146.6
13450
AZ2280-1A-110DF
110
8.2
COIL SPECIFICATIONS – AC Coil 50/60 Hz
Coil Resistance
± 10%
25
ORDER NUMBER*
Nominal Coil
VAC
12
Must Operate
VAC
10.2
Max. Continuous
VAC
13.8
Nominal Coil
Power VA
2.3
24
20.4
27.6
2.1
120
102.0
138.0
2.3
2,500
AZ2280–1A–120AF
208
176.8
239.0
2.2
11,000
AZ2280–1A–208AF
220/240
187.0
276.0
2.2/2.6
13,490
AZ2280–1A–240AF
277
235.4
318.5
2.2
15,000
AZ2280–1A–277AF
100
AZ2280–1A–12AF
AZ2280–1A–24AF
*Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “1C.” Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version. For
0.110 coil terminals change “F” to “KF.”
MECHANICAL DATA
1.08
(27.5)
1.09
(27.8)
0.25 x 0.032
±0.003
3 places
1.27
(32.4)
1.98 1.71
(50.2) (43.5)
0.187 x 0.02*
±0.003
2 places
0.14
(3.5)
* "K" = 0.110 x .02
WIRING DIAGRAM (Top View)
3
2
4
1
5
1 FORM A
3
2
1
5
1 FORM B
2
4
1
5
1 FORM C
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
6/13/06W
Similar pages