Kingbright BLS101SURC/E12V 10mm screw based led lamp Datasheet

10mm SCREW BASED LED LAMP
BLS101SURC/E12V HYPER RED
Features
Description
!BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT
APPLICATION OF DIFFERENT ACROSS CURRENT.
!LONG LIFE.
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
!LOW CURRENT, POWER SAVINGS.
!LOW MAINTENANCE.
!DIFFERENT COLOR AVAILABLE.
!SOLID STATE, HIGH VIBRATION RESISTANT.
! 12V
INTERNAL RESISTOR
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAB2236
APPROVED: J.LU
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/14/2003
DRAWN:S.J.HOU
PAGE: 1 OF 3
Selection Guide
Par t No .
Dic e
BLS101SURC/E12V
Iv (m c d )
V=12V
L en s Ty p e
HYPER RED (InGaAlP)
WATER CLEAR
V i ew i n g
An g l e
Min .
Ty p .
2θ1/2
650
1800
20 °
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T)=25°°C
Sy m b o l
Par am et er
Un it s
Tes t Co n d it io n s
λpeak
Peak Wavelength
Hyper Red
640
nm
VF=12V
Dominate Wavelength
Hyper Red
6 30
nm
VF=12V
∆λ1/2
Spectral Line Half-width
Hyper Red
25
nm
VF=12V
IF
Forward Current
Hyper Red
21.7
mA
VF=12V
IR
Reverse Current
Hyper Red
uA
V R = 5V
D
D ev i c e
Ty p .
Max .
10
Absolute Maximum Ratings at T)=25°°C
Par am et er
H y p e r R ed
Un it s
270
mW
DC Forward Voltage for 12V
14
V
Reverse Voltage
5
V
Power dissipation for 12V
Operating Temperature
-40°C To +70°C
Storage Temperature
-40°C To +85°C
SPEC NO: DSAB2236
APPROVED: J.LU
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/14/2003
DRAWN:S.J.HOU
PAGE: 2 OF 3
Hyper Red
SPEC NO: DSAB2236
APPROVED: J.LU
BLS101SURC/E12V
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/14/2003
DRAWN:S.J.HOU
PAGE: 3 OF 3
Similar pages