BRIGHT LED ELECTRONICS CORP. BD-E815RD SINCE 1981 ● Features : 1. 0.80 inch (20.10 mm) Digit Height. 2. Continuous uniform segments. 3. Low power requirement. 4. Excellent characters appearance. 5. Solid state reliability. 6. Categorized for luminous intensity. 7. Duplex drive common anode. ● Package Dimensions : 12.30(.484) 10 25.70(1.011) 20.10(.791) 22.0(.866) + PIN 1. 35.60(1.402) 2.0(.079) 10.00(.394) ● 1. Description : The BD-E815RD is a 20.10 mm(0.80") high dual digit seven segments display. 2. This product use bright red chips, which are made from GaP on GaP substrate. 3. This product have a black face and white segments. 4. 0.50(.020) 3.00(.118)MIN. 2.54(.100) Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without notice. This product doesn't contain restriction substance, comply ROHS standard. ● Internal Circuit Diagram : 佰鴻工業股份有限公司 http://www.brtled.com Ver.1.0 1.1 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. BD-E815RD SINCE 1981 ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Per Segment Pd 40 mW Forward Current Per Segment IF 15 mA IFP (Duty 1/10, 1KHZ) 50 mA VR 5 V Operating Temperature Topr -40℃~80℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature (1/16" From Body) Tsol 260℃ For 5 Seconds - Peak Forward Current Per Segment Reverse Voltage Per Segment ● Electrical And Optical Characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Per Segment Vf IF=10mA - 2.1 2.5 V Luminous Intensity Per Segment Iv IF=10mA - 1.6 - mcd Reverse Current Per Segment IR VR=5V - - 100 µA Peak Wave Length λp IF=10mA - 700 - nm Dominant Wave Length λd IF=10mA - 650 - nm Spectral Line Half-width ∆λ IF=10mA - 100 - nm 佰鴻工業股份有限公司 http://www.brtled.com Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. BD-E815RD SINCE 1981 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength Relative Radiant Intensity 1.0 0.5 0 550 600 650 Fig.2 Forward Current VS. Forward Voltage 40 30 20 10 0 700 Wavelength(nm) Relative Luminous Intensity (@20mA) Forward Current (mA) 50 1 2 3 4 5 2.0 750 800 850 Fig.3 Relative Luminous Intensity VS. Ambient Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 Ambient Temperature Ta( C) Forward Voltage (V) Fig.4 Relative Luminous Intensity VS. Forward Current Fig.5 Forward Current Derating Curve VS. Ambient Temperature 25 20 佰鴻工業股份有限公司 http://www.brtled.com Forward Current(mA) Relative Luminous Intensity (@20mA) ● 1.5 1.0 0.5 0 10 20 30 40 Forward Current(mA) 50 15 10 5 0 20 40 60 80 100 120 Ambient Temperature Ta( C) Ver.1.0 Page 3 of 3