A14 RoHS Compliant 32.6 x 34.6 x 34.0 mm Features • • • • • Large switching capacity up to 100A Ideal for high inrush applications Quick connect mounting available Suitable for automobile and lamp accessories QS-9000, ISO-9002 Certified Manufacturing Contact Data Dimensions shown in mm. Dimensions are shown for reference purposes only. Specifications and availability subject to change without notice. Contact Arrangement Contact Rating 1A = SPST N.O. Contact Resistance < 30 milliohms initial 1C = SPDT Contact Material AgSnO2In2O3 1A : 100A @ 12VDC Maximum Switching Power 1200W 1A : 50A @ 24VDC Maximum Switching Voltage 75VDC 1C : N.O. 100A @ 12VDC Maximum Switching Current 100A 1C : N.O. 50A @ 24VDC 1C : N.C. 70A @ 12VDC 1C : N.C. 35A @ 24VDC Coil Data Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage VDC (max) Release Voltage VDC (min) 70% of rated voltage 10% of rated voltage Rated Max 12 15.6 50 8.40 1.2 24 31.2 155 16.80 2.4 Coil Power W Operate Time ms Release Time ms 2.90 10 5 General Data Electrical Life @ rated load 100K cycles, typical Mechanical Life 10M cycles, typical Insulation Resistance 100M Ω min. @ 500VDC Dielectric Strength, Coil to Contact 2500V rms min. @ sea level Contact to Contact 1500V rms min. @ sea level Shock Resistance 147m/s2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 30N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 60g Caution 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 2. For Dry Circuit application contact factory 3. The coil has a 1K ohm resistor in parallel that is taken into account in the coil resistance specification page 97 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 A14 Ordering Information 1. Series A14 1C C Q 12VDC A14 2. Contact Arrangement 1A = SPST N.O. 1C = SPDT 3. Sealing Option C = Dust Cover 4. Termination Options Q = Quick Connect 6. Coil Suppression Blank = 680Ω for 12VDC; 2700Ω for 24VDC D = Diode (1N4005) 2D = 2 Diodes (1N4005) **Consult factory if other values are needed Dimensions Units = mm ** We recommend the PR Series socket from Custom Connector Corporation Bottom Views 1A 1C page 98 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 Specifications and availability subject to change without notice. Schematics Dimensions shown in mm. Dimensions are shown for reference purposes only. 5. Coil Voltage 12VDC 24VDC