1 D Description Nut Washer Main Body Pin Insulator Socket Spacer Shield Sleeve Retaining Nut Crimp Ring Material Brass Brass Brass Teflon BE CU Teflon Brass Brass Brass 2 Finish Nickel Nickel Nickel Teflon Gold Teflon Nickel Nickel Nickel 3 4 RECOMMENDED MOUNTING HOLE RECOMMENDED CABLE STRIPPING DIMENSIONS 0.134 (3.40) 0.268 (6.80) 0.276 (7.00) ∅0.254 (6.50) RG-58 Cable D 0.234 (6.00) SIDE VIEW 1/4-36UNS-2A THREADS SOCKET ∅0.177 (4.50) Ø0.256 (6.50) 0.354 (9.00) C WASHER 0.446 (11.40) CRIMP RING ∅0.049 (1.24) C NUT 0.276 (7.00) 0.500 (12.70) H8 1/4-36UNS-2B THREADS Ø0.402 (10.20) 0.636 (16.30) 0.996 (25.30) 0.065 (1.65) 0.020 (0.50) B B CONREVSMA005-R58 ASSEMBLY INSTRUCTIONS WASHER RETAINING NUT SPACER PIN INSULATOR CRIMP RING SOCKET NUT A 1. 2. 3. 4. 5. 6. STRIPPED CABLE SHIELD SLEEVE MAIN BODY Insert the center conductor through the retaining nut, shield sleeve, and spacer. Solder the pin to the center conductor. Insert the pin into the pin insulator, then screw the main body onto the retaining nut. Wrap the braid around the tail of the body and crimp the ring with a Title hex crimp tool. SMA FEMALE BULKHEAD MOUNT Use the shrink wrap to cover the crimp ring. CABLE END CRIMP FOR RG58 CABLE Use the nut and washer to secure the connector to a case. Part No. Revision: 1.0 CONSMA005-R58 Dimensions: 1 2 INCHES (mm) Date: 5/29/2007 3 SHRINK WRAP A CONNECTOR CITY 159 ORT LANE MERLIN, OR 97532 PH (541)-471-6256 FAX (541)-471-6251 Sheet 1 of 1 4