CHENMKO ENTERPRISE CO.,LTD CHUMC4PT SURFACE MOUNT Dual Digital Silicon Transistor APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. FEATURE * Small surface mounting type. (SC-88A/SOT353) * High current gain. * Suitable for high packing density. SC-88A/SOT353 * Low colloector-emitter saturation. * High saturation current capability. * Both the CHDTA114Y & CHDTC144E in one package. (1) (5) 0.65 1.2~1.4 2.0~2.5 0.65 MARKING (2) * UC4 (3) 0.15~0.35 1.15~1.35 0.8~1.1 0.08~0.15 0~0.1 0.1 Min. CIRCUIT 1 3 R1 R2 2.15~2.45 R2 R1 4 5 SC-88A/SOT353 Dimensions in millimeters CHDTA114Y LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − -50 V VIN Input voltage -40 +6 V − -100 − -100 − 150 mW IO DC Output current IC(Max.) Tamb ≤ 25 OC, Note 1 mA PTOT Total power dissipation TSTG Storage temperature −55 +150 O TJ Junction temperature − 150 O Note Transistor mounted on an FR4 printed-circuit board. C C CHDTC144E LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. VCC Supply voltage − VIN Input voltage -10 IO DC Output current IC(Max.) Tamb ≤ 25 OC, Note 1 MAX. UNIT 50 V +40 V − 30 − 100 − 150 mW mA PTOT Total power dissipation TSTG Storage temperature −55 +150 O C TJ Junction temperature − 150 O C Note Transistor mounted on an FR4 printed-circuit board. CHDTA114Y CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VIoff) Input off voltage IO=-100uA; VCC=-5.0V -0.3 − − V VI(on) Input on voltage IO=-1.0mA; VO=-0.3V − − -1.4 V VO(on) Output voltage IO=-5mA; II=-0.25mA − -0.1 -0.3 V II Input current VI=-5.0V − − -0.88 mA IC(off) Output current VI=0V; VCC=-50V − − -0.5 uA hFE DC current gain IO=-5.0mA; VO=-5.0V 68 − − R1 Input resistor 7.0 10.0 13.0 KΩ R2/R1 fT Resistor ratio Transition frequency 3.7 − 4.7 250 5.7 − MHz IC=-5mA, VCE=-10.0V = f=100MHz Note Pulse test: tp≤300uS; δ≤0.02. CHDTC144E CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VIoff) Input off voltage IO=100uA; VCC=5.0V − − 0.5 V VI(on) Input on voltage IO=10mA; VO=0.3V 3.0 − − V VO(on) Output voltage IO=10mA; II=0.5mA − 0.1 0.3 V II Input current VI=5V − − 0.18 mA IC(off) Output current VI=0V; VCC=50V − − 0.5 uA hFE DC current gain IO=5mA; VO=5.0V 68 − − R1 Input resistor 32.9 47.0 61.1 KΩ R2/R1 fT Resistor ratio Transition frequency 0.8 − 1.0 250 1.2 − MHz Note Pulse test: tp≤300uS; δ≤0.02. IE=-5mA, VCE=10.0V f=100MHz = RATING CHARACTERISTIC CURVES ( CHUMC4PT) CHDTA114Y Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) -100 Fig.2 Output current vs. input voltage (OFF characteristics) -10m -5m VO=- 0.3V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) -50 -20 -10 -5 -2 Ta =- 40OC O 25 = C 100OC -1 -500m -200m -100m -100 -200 -500 -1m -2m -2m -1m -500 Ta=100OC 25OC -40 OC -200 -100 -50 -20 -10 -5 -2 -1 -0 -5m -10m -20m -50m -100m VCC =- 5V -0.5 -1.5 -2.0 -2.5 Fig.3 DC current gain vs. output current Fig.4 Output voltage vs. output current 1k -1 200 VO =- 5V Ta=100 C 25OC -40OC 100 50 20 10 5 2 1 -100 -200 lO/lI=20 -500m O OUTPUT VOLTAGE : VO(on) (V) 500 -3.0 INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A) DC CURRENT GAIN : GI -1.0 O -200m -100m Ta=100 C 25OC -40 OC -50m -20m -10m -5m -2m -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO (A) -1m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO (A) RATING CHARACTERISTIC CURVES ( CHUMC4PT) CHDTC144E Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) 100 Fig.2 Output current vs. input voltage (OFF characteristics) 10m 5m VO=0.3V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) 50 20 10 5 O Ta =- 40 C O 25 = C 100OC 2 1 500m 200m 100m 100 200 500 1m 2m 2m 1m 500 VCC=5V Ta=100OC 25OC -40 OC 200 100 50 20 10 5 2 1 5m 10m 20m 50m 100m 0 0.5 OUTPUT CURRENT : IO (A) 1 VO =5V 2.5 3.0 lO/lI=20 500m OUTPUT VOLTAGE : VO(on) (V) DC CURRENT GAIN : GI 100 2.0 Fig.4 Output voltage vs. output current 500 200 1.5 INPUT VOLTAGE : VI(off) (V) Fig.3 DC current gain vs. output current 1k 1.0 Ta=100 OC 25OC -40OC 50 20 10 5 2 1 100 200 200m 100m Ta=100OC 25OC -40 OC 50m 20m 10m 5m 2m 500 1m 2m 5m 10m 20m 50m100m OUTPUT CURRENT : IO (A) 1m 100 200 500 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A)