VER : B_7 update : 2016.06.07 AC-DC Power Module ALC SERIES 8 Watts KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-305VAC, 47-440 Hz Single and Dual Output Low Ripple and Noise Isolation Class II Maximum No-Load Watts < 0.3W CE , UL Approval 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage Frequency (Hz) Input Output Protection Isolation Environment Physical Safety EMC ALC- ALC- ALC- ALC- ALC- 3.3S 5S 8S 9S 12S ALC14S ALC15S ALC24S 6.6W 8W 8W 8W 8W 8W 8W 8W 90-305 VAC or 120-430 VDC 47-440 Hz Current (Full load) 190 mA max. (115 VAC) / 120 mA max. (230 VAC) Inrush Current (<500us) 25 A max. (115 VAC) / 45 A max. (230 VAC) Leakage Current 0.25 mA max. External Fuse (recommend) 2 A slow blow type Voltage (V.DC.) 3.3V Voltage Accuracy ±2% Current (mA) max 2000 Line Regulation (LL-HL) (typ.) ±0.2% Load Regulation (0-100%) (typ.) ±3%. Minimum Load 0% Maximum Capacitive Load (at 230VAC) 8000uF Ripple 3.3S~15S : <100mV max (Vp-p) Noise 3.3S~15S : <150mV max (Vp-p) Efficiency 69% Hold-up Time 10 ms min. Switching Frequency 132±8 KHz 5V 8V 9V 12V 14V 15V 24V 1600 1000 888 666 571 533 335 ±2% ±0.5%. 8000uF 4000uF 4000uF 1300uF 820uF 820uF 270uF 80% 81% 75% 78% 24S : <150mV max (Vp-p) 24S : <200mV max (Vp-p) 79% Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) 79% 80% Input-Output (V.AC) 3000V Operating Temperature -40°C…+70°C ( with derating ) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >500,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 1.48 x 1.11 x 1.08 Inches ( 37.66 x 28.16 x 27.5 mm ) Tolerance 0.5 mm Case Material Plastic resin (flammability to UL 94V-0) Weight 45 g Cooling Method Free air convection Agency Approvals CE, UL, cUL EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : B_7 update : 2016.06.07 AC-DC Power Module ALC SERIES 8 Watts ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Dual Output ) Max Output Wattage (W) Voltage Input Output ALC-5S3.3S 9W ALC-8S5S 8.5W ALC-12S5S 8.5W 90-305 VAC or 120-430 VDC Frequency (Hz) 47-440 Hz Current (Full load) 200 mA max. (115 VAC) / 125 mA max. (230 VAC) Inrush Current (<500us) 25 A max. (115 VAC) / 45 A max. (230 VAC) Leakage Current 0.25 mA max. External Fuse (recommend) 2 A slow blow type Voltage (V.DC.) Vo : 5V Voltage Accuracy Vo : ±2% Current (mA) max 1600 / 310 Line Regulation (LL-HL) (typ.) Vo : ±0.2% Vr : ±3% Load Regulation (10-100%) (typ.) Vo : ±0.5% Vr : ±5% Minimum Load 25% Maximum Capacitive Load (at 230VAC) Vo : 4500uF Ripple <100mV max (Vp-p) Noise <150mV max (Vp-p) Efficiency 73% Hold-up Time 10 ms min. Switching Frequency 132±8 KHz Vr : 3.3V Vr : ±15% Vo : 8V Vr : 5V Vo : ±2% Vo : 800uF 666 / 100 Vr :3800uF 78% Over Power Protection Hiccup technique, auto-recovery Protection Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Isolation Input-Output (V.AC) 3000V Operating Temperature -40°C…+70°C ( with derating ) Environment Physical Safety EMC Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH Vr : 5V Vr : ±10% 1000 / 100 Vr : 3800uF Vo : 12V Vo : 260uF 79% MTBF >500,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 1.48 x 1.11 x 1.08 Inches ( 37.66 x 28.16 x 27.5 mm ) Tolerance 0.5 mm Case Material Plastic resin (flammability to UL 94V-0) Weight 45 g Cooling Method Free air convection Agency Approvals CE, UL, cUL EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 Vr : 3800uF NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. It's necessary Varistor 14S561K at L / N input side in parallel. 3. It's necessary 10R / 15φ thermistor at L input side in series connection. 4. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : B_7 update : 2016.06.07 AC-DC Power Module ALC SERIES MECHANICAL DIMENSION 8 Watts ( Top View ) BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single Dual 1 AC IN (N) AC IN (N) 2 AC IN (L) AC IN (L) 3 NC +Vr 4 +VO +VO 5 GND GND DERATING -3-