7N70 700V N-Channel Power MOSFET ● ● ● ● ● RDS(ON), VGS@10V,[email protected]<1.6Ω Fast switching capability Low gate charge Lead free in compliance with EU RoHS directive. Green molding compound PRODUCT SUMMARY VDS (V) Current(A) 7 700 RDS(on)(Ω) 1.6 @ VGS =10V Pin Definition: ● 1. Gate 2. Drain 3. Source Case: TO-220,ITO-220,TO-262,TO-263 Package Ordering Information Package Packing DMT7N70-TU TO-220 50pcs / Tube DMF7N70-TU ITO-220 50pcs / Tube DMK7N70-TU TO-262 50pcs / Tube DMG7N70-TU TO-263 50pcs / Tube DMG7N70-TR TO-263 800pcs / 13" Reel Part No. Block Diagram D G S ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage VDSS 700 V Gate-Source Voltage VGSS ±30 Continuous Drain Current ID 7 V A Pulsed Drain Current IDM 28 A Single Pulse Avalanche Energy (Note 1) EAS 530 mJ TO-220/TO-262/TO-263 Power Dissipation ITO-220 142 W 45 W PD Junction Temperature TJ +150 Operating Temperature TOPR -55 ~ +150 Storage Temperature TSTG -55 ~ +150 NOTES : 1. L=19.5mH, IAS=7A, VDD=50V, RG=25ohm, Starting TJ=25oC 2. Pulse width<300us, Duty cycle<2% 3. Essentially independent of operating temperature typical characteristics. 4. Guaranteed by design, not subject to production testing May.2015-REV.00 www.dyelec.com °C °C °C 1/7 7N70 700V N-Channel Power MOSFET THERMAL DATA PARAMETER Junction to Ambient SYMBOL RATING UNIT θJA 62.5 °C/W TO-220/TO-262/TO-263 ITO-220 0.9 TO-220/TO-262/TO-263 Junction to Case θJC ITO-220 °C/W 2.6 ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS - - V Static Drain-Source Breakdown Voltage BVDSS VGS=0V,ID=250uA 700 Gate Threshold Voltage VGS(th) VDS=VGS,ID=250uA 2 - 4 V 1.6 Ω RDS(on) VGS=10V,ID=3.5A - 1.4 Zero Gate Voltage Drain Current IDSS VDS=700V,VGS=0V - - 1.0 uA Gate-Source Leakage Current IGSS VGS=+30V,VDS=0V - - +100 nA Diode Forward Voltage VSD IS=7A,VGS=0V - - 1.4 V - 163 - - 12 - - 30 - - 1200 1600 - 150 190 - 60 80 - 60 80 - 200 230 - 280 350 - 250 300 Drain-Source On-State Resistance Dynamic (Note 4) Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-On Delay Time td(on) Turn-On Rise Time tr Turn-Off Delay Time td(off) Turn-Off Fall Time VDS=100V, ID=7A, VGS=10V (Note 2,3) VDS=25V, VGS=0V, f=1.0MHZ VDD=30V, ID=1A, RG=25Ω (Note 2,3) tf nC pF ns Drain-Source Diode Maximum Continuous Drain-Source Diode Forward Current Maximum Pulsed Drain-Source Diode Forward Current Reverse Recovery Time Reverse Recovery Charge May.2015-REV.00 IS --- - - 6 A ISM --- - - 24 A - 320 - ns - 2.4 - uC trr Qrr VGS=0V, IS=7A dIF/ dt=100A/us www.dyelec.com (Note 2) 2/7 7N70 700V N-Channel Power MOSFET TYPICAL CHARACTERISTICS May.2015-REV.00 www.dyelec.com 3/7 7N70 700V N-Channel Power MOSFET TYPICAL CHARACTERISTICS On State Current vs. Allowable Case Temperature 1 0.1 Notes: 1. θJC (t) = 0.88℃/W Max. 2. Duty Factor, D=t1/t2 3. TJM-TC=PDM×θJC (t) 0.01 1E-5 1E-4 1E-3 0.01 0.1 1 10 Square Wave Pulse Duration, t1 (sec) May.2015-REV.00 Reverse Drain Current, IDR (A) Thermal Response, θJC (t) Transient Thermal Response Curve www.dyelec.com 10 150℃ 25℃ 1 Notes: 1. GS=0V 2. 250µs Test 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Source-Drain Voltage, VSD (V) 4/7 7N70 700V N-Channel Power MOSFET TO-220 Mechanical Drawing ITO-220 Mechanical Drawing May.2015-REV.00 www.dyelec.com 5/7 7N70 700V N-Channel Power MOSFET TO-262 Mechanical Drawing TO-263 Mechanical Drawing May,2015-REV.00 www.dyelec.com 6/7 7N70 700V N-Channel Power MOSFET Notice Specifications of the products displayed herein are subject to change without notice. DIYI or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in DIYI’s terms and conditions of sale for such products, DIYI assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of DIYI products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify DIYI for any damages resulting from such improper use or sale. May.2015-REV.00 www.dyelec.com 7/7