EF6A02F THRU EF6A06F Glass Passivated Super Fast Recovery Rectifier Voltage Range 100 to 600 V Current 6.0 Ampere Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic ITO-220AC Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity:Color band denotes cathode Mounting position: Any Weight: 1.73 grams ITO-220AC .185(4.70) .175(4.44) MAX.412(10.5) DIA .140(3.56) .130(3.30) .140(3.56) .130(3.30) .594(15.1) .587(14.9) PIN 2 1 .053(1.35) .045(1.15) .160(4.06) .140(3.56) .026(0.65) .022(0.55) .131(3.39) .122(3.08) .560(14.20) .492(12.50) .136(3.45) .110(2.80) .025(0.64) .014(0.35) .205(5.20) .195(4.95) 1 .125(3.18) .115(2.92) .27(6.86) .23(5.84) .108(2.75) .098(2.50) MAX.0.05(1.5) YENYO 2 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMTER SYMBOL EF 6A02F EF 6A03F EF 6A05F EF 6A06F UNIT Maximum Recurrent Peak Reverse Voltage VRRM 100 200 400 600 V Maximum RMS Voltage VRMS 70 140 280 420 V VDC 100 200 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TC=100 C IF(AV) 6.0 A IFSM 125 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 6.0 A 0.95 VF 1.25 o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range 2.4 V 5.0 uA 250 uA 25 nS 85 pF 50 R JC 2.2 TJ, TSTG -55 to +150 o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to case. 1/2 R1,JUN-12 RATINGS AND CHARACTERISTIC CURVES EF6A02F THRU EF6A06F FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 125 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 6.0 5.0 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 100 75 50 25 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o CASE TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 EF6A05F EF6A06 EF6A06F 1.0 EF6A02F-EF6A03F 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 o TJ=125 C 100 10 o TJ=25 C 1 0.1 0 2.2 2.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p EF6A02F-EF6A05F 100 EF6A06F 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R1,JUN-12