Datatronic DR332-1-105C Data line low profile smd choke Datasheet

February 23, 2009
DR332-2 Series DATA LINE Low Profile SMD CHOKE
Features
z
z
z
z
z
z
z
Inductance Range from 5 µH to 4.7mH
Operating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +125°C
Wide Frequency Range Over 100 MHz
Laser Marking
Tinned Leads with Leaded Solder is Available (Note 3)
Custom Inductance Values Available
ELECTRICAL SPECIFICATIONS AT 25ºC
Inductance
Leakage
Ind. (nH typ)
DCR
(Ω typ)
Rated Current
(A max)
HIPOT
(Vdc)
5 μH +/- 30% @ 100KHz
6 μH +/- 30% @ 100KHz
6 μH +/- 30% @ 100KHz
11 μH +/- 30% @ 100KHz
25 μH +/- 30% @ 100KHz
25 μH +/- 30% @ 100KHz
51 μH +/- 30% @ 100KHz
51 μH +/- 30% @ 100KHz
100 μH +/- 30% @ 100KHz
470 μH +/- 30% @ 100KHz
1.0 mH -30/+50% @ 100KHz
2.2 mH -30/+50% @ 10KHz
4.7 mH -30/+50% @ 10KHz
50
50
400
50
150
1500
200
2000
180
200
250
250
300
0.100
0.022
0.022
0.120
0.130
0.130
0.160
0.160
0.200
0.200
0.200
0.400
0.550
1.2
2.5
2.5
0.8
0.8
0.8
0.8
0.8
0.5
0.7
0.7
0.5
0.4
250
250
250
250
250
250
250
250
250
750
750
750
750
Part Number
DR332-1-502C
DR332-2-602C
DR332-2-602D
DR332-1-113C
DR332-1-253C
DR332-1-253D
DR332-1-513C
DR332-1-513D
DR332-2-104C
DR332-1-474C
DR332-1-105C
DR332-1-225C
DR332-1-475C
MECHANICAL OUTLINES
0.362 (9.2)
1
4
2
3
0.28 (7.1)
MAX
1
2
2
-2
3
3
X
X
X
X
WC
WO
Y C
Y
4
3
0.236 (6.0)
MAX
SCHEMATIC
TOP VIEW
0.189 (4.8)
MAX
0.012 (0.3)
FRONT
NOTES:
1. All dimensions are shown in inches “IN” (millimeters “mm”).
2. Rated voltage 80VDC, 42VAC.
3. For non-RoHS parts replace SM prefix with 42- (e.g. DR3322-502C becomes 42-332-2-502C).
4. Terminal finish is compliant to RoHS requirements. Solder in
accordance with J-STD-020C.
0.024 (0.6)
0.098 (2.5)
BOTTOM
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700, Fax: 951-928-7701, Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
Similar pages