F-213 FFSD–20–S–10.00–01–N ™ (1,27 mm) .050" ••••••••••••••••••• FFMD–20–T–02.00–01–N–R FFSD, FFMD SERIES ™ TIGER EYE FLAT IDC WIRE CABLES SPECIFICATIONS Mates with: FTS, FTSH, EHF, SHF, ESHF TYPE STRIP END OPTION NO. PINS PER ROW OVERALL LENGTH For complete specifications see www.samtec.com?FFSD FFSD –“XX.XX” Assembled Length in INCHES (± .130") 2 inches minimum = Notch Polarization (FFSD only) –D = Double End Reverse Daisy –RW = Wiring –D “XX” = Chain 2" min. Transfer End –T = (FFMD only) –R = Reverse Strain –SR = Relief Outside –O = Reverse (Mates only with ESHF Series) ± 1/8" 3 No. of positions x (1,27) .050 + (8,00) .315 Requires –DXX 3 Middle –M = Reverse SPECIFICATIONS 4" minimum 02 Mates with: FLE*, SFMC*, Transfer End Option Mates with: FTS, FTSH, EHF, SHF, ESHF Leave blank for –S and –D End Options. For –T End Option Specify “–N” (Socket has notch polarization) (FFMD only) “XX” 01 Blue or black wire opposite position #1. 1 2 Requires –DXX Not available with –O, –M, –R or –DXX 3 • Strain relief option For complete specifications see www.samtec.com?FFMD FFSD = Socket Strip FFMD Insulator Material: Black Glass Filled Polyester Terminal: Phosphor Bronze Contact: BeCu (-T) Plating: Sn over 50µ" (1,27 µm) Ni Wire: 30 AWG Current Rating: 0.5A/contact Operating Temp Range: -40°C to +105°C RoHS Compliant: Yes *Note: Standard FFMD callout will not mate with FLE, SFMC. Must use gold plated callouts. (See drawing on web.) When mated with a socket, Wire 1 mates with Pin 2; Wire 2 mates with Pin 1, etc. Note: This Series is non-standard, non-returnable. –N (Call for other sizes) –S = Single End OTHER OPTION OPTION = Assembled Length –05, –08, –10, –13, –17, –20, –25 Insulator Material: PBT Contact: BeCu Plating: 10µ" (0,25 µm) Au over 50µ" (1,27 µm) Ni on contact area; Sn over 50µ" (1,27 µm) Ni on balance Wire: 30 AWG Current Rating: 0.5A per contact Operating Temp Range: -40°C to +105°C Lead Size Accepted: (0,41 mm) .016" SQ Contact Resistance: 15 mΩ Insertion Depth: (2,64 mm) .104" to (3,17 mm) .125" Insertion Force: (Single contact only) 5 oz (1,39 N) avg. Withdrawal Force: (Single contact only) 3 oz (0,83 N) avg. RoHS Compliant: Yes Note: This Series is non-standard, non-returnable. 01 FFMD = Terminal Strip (1,90) .075 01 01 (3,05) .120 (3,05) .120 (1,02) .040 No. of positions x (1,27) .050 + (4,19) .165 No. of positions x (1,27) .050 + (4,19) .165 (5,08) .200 (5,08) .200 (3,07) .121 (1,27) .050 (0,41) .016 SQ WWW.SAMTEC.COM (1,27) .050