NSC DS1489N Quad line receiver Datasheet

DS1489/DS1489A
Quad Line Receiver
General Description
Features
The DS1489/DS1489A are quad line receivers designed to
interface data terminal equipment with data communications
equipment. They are constructed on a single monolithic silicon chip. These devices satisfy the specifications of EIA
Standard RS-232D. The DS1489/DS1489A meet and exceed the specifications of MC1489/MC1489A and are
pin-for-pin replacements.
n
n
n
n
n
Four separate receivers per package
Programmable threshold
Built-in input threshold hysteresis
“Fail safe” operating mode: high output for open inputs
Inputs withstand ± 30V
Schematic and Connection Diagrams
DS005777-1
(1⁄4 of unit shown)
DS1489: RF = 10k
DS1489A: RF = 2k
Dual-In-Line Package
DS005777-2
Top View
Order Number DS1489M, DS1489N
DS1489AM or DS1489AN
See NS Package Number M14A or N14A
© 1998 National Semiconductor Corporation
DS005777
www.national.com
DS1489/DS1489A Quad Line Receiver
May 1998
AC Test Circuit and Voltage Waveforms
DS005777-3
DS005777-4
FIGURE 1.
www.national.com
2
Absolute Maximum Ratings (Note 2)
Storage Temperature Range
−65˚C to +150˚C
Maximum Power Dissipation (Note 1) at 25˚C
Molded DIP Package
1207 mW
SO Package
1042 mW
Lead Temperature (Soldering, 4
sec.)
260˚C
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Power Supply Voltage
Input Voltage Range
Output Load Current
Power Dissipation (Note 3)
Operating Temperature Range
10V
± 30V
Note 1: Derate molded DIP package 9.7 mW/˚C above 25˚C; derate SO
package 8.33 mW/˚C above 25˚C.
20 mA
1W
0˚C to +75˚C
Electrical Characteristics (Notes 3, 4, 5)
DS1489/DS1489A: The following apply for VCC = 5.0V ± 1%, 0˚C ≤ TA ≤ +75˚C unless otherwise specified.
Symbol
VTH
Parameter
Conditions
VOUT ≤ 0.45V,
IOUT = 10 mA
Input High Threshold Voltage
DS1489
Min
Typ
Max
Units
1.0
1.25
1.5
V
TA = 25˚C
0.9
DS1489A
TA = 25˚C
1.75
1.6
V
2.00
2.25
V
2.40
V
1.00
1.25
V
1.35
V
+5.6
+8.3
mA
−8.3
mA
1.55
VTL
Input Low Threshold Voltage
VOUT ≥ 2.5V,
IOUT = −0.5 mA
IIN
Input Current
VIN = +25V
VIN = −25V
VIN = +3V
VOH
VIN = −3V
IOUT = −0.5 mA
Output High Voltage
TA = 25˚C
0.75
0.65
+3.6
−3.6
−5.6
+0.43
+0.53
−0.43
−0.53
2.6
3.8
5.0
V
2.6
3.8
5.0
V
0.33
0.45
VIN = 0.75V
Input = Open
VOL
Output Low Voltage
ISC
Output Short Circuit Current
ICC
Supply Current
VIN = 3.0V, IOUT = 10 mA
VIN = 0.75V
VIN = 5.0V
Pd
Power Dissipation
VIN = 5.0V
mA
mA
−3.0
V
mA
14
26
mA
70
130
mW
Switching Characteristics
VCC = 5V, TA = 25˚C
Symbol
tpd1
Parameter
Input to Output “High”
Conditions
RL = 3.9k, (Figure 1) (AC Test Circuit)
Min
Typ
Max
Units
28
85
ns
RL = 390Ω, (Figure 1) (AC Test Circuit)
20
50
ns
RL = 3.9k, (Figure 1) (AC Test Circuit)
RL = 390Ω, (Figure 1) (AC Test Circuit)
110
175
ns
9
20
ns
Propagation Delay
tpd0
Input to Output “Low”
Propagation Delay
tr
Output Rise Time
tf
Output Fall Time
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they
are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation.
Note 3: Unless otherwise specified min/max limits apply across the 0˚C to +75˚C temperature range for the DS1489 and DS1489A.
Note 4: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown
as max or min on absolute value basis.
Note 5: These specifications apply for response control pin = open.
3
www.national.com
Typical Characteristics
VCC = 5.0V, TA = +25˚C unless otherwise noted
DS005777-10
DS005777-7
FIGURE 5. Input Threshold Voltage vs Temperature
FIGURE 2. Input Current
DS005777-11
DS005777-8
FIGURE 6. Input Threshold vs Power Supply Voltage
FIGURE 3. DS1489 Input Threshold Voltage Adjustment
DS005777-12
DS005777-9
FIGURE 7. Noise Rejection vs Capacitance for
DS1489A
FIGURE 4. DS1489A Input Threshold Voltage
Adjustment
www.national.com
4
Typical Application Information
DS005777-5
*Optional for noise filtering.
Applications Using the Response Control Pin
Noise Filter
See Figure 7
Threshold Shift
See Figures 3, 4
Noise Filter and Threshold Shift
See Figures 3, 4, 7
DS005777-13
DS005777-14
DS005777-15
Application of DS1488, DS1489A and INS8250
DS005777-16
5
www.national.com
6
Physical Dimensions
inches (millimeters) unless otherwise noted
SO Package (M)
Order Number DS1489M or DS1489AM
NS Package Number M14A
Molded Dual-In-Line Package (N)
Order Number DS1489N or DS1489AN
NS Package Number N14A
7
www.national.com
DS1489/DS1489A Quad Line Receiver
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into
sonably expected to cause the failure of the life support
the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness.
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Similar pages