10Base-T Interface Module ELECTRONICS INC. EPE6356S • General purpose 10Base-T Filter Module • Complies with or exceeds IEEE 802.3, 10Base-T Standards Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) (Ref.) Xmit/Rcv 1-10 MHz 5-10 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz @ 200 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 19/19 -1/-1 -15/-15 -5/-5 -10/-10 -16/-16 -40/-40 -30/-30 -25/-25 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 1-10 MHz -30 Isolation : Meets or exceeds 802.3 IEEE Requirements • Characteristic Filter Impedance : 100 Ω • • Referenced to the Output Level Fundamental Frequency @ 5 MHz • Schematic Receive Channel Transmit Channel 48,42,36,3 1,7,13,19 2,8,14,20 LPF 45,39,33,2 4,10,16,22 LPF 47,41,35,2 6,12,18,24 46,40,34,2 3,9,15,21 1:1 1: 2 43,37,31,25 Package 1.255 (31.88) .085 (2.16) .090 (2.29) .050 (1.27) 48 PCA EPE6356S Date Code .710 (18.03) .900 (22.90) 25 Solder Pad Layout 1 Pin 1 I.D. .030 (.762) 1.150 (29.20) .010/.015 (.254/.381) .300 (7.62) .016/.022 (.406/.559) 24 .008/.012 (.203/.305) 0°-8° .035 (.889) .850 (21.60) .050 (1.27) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6356S Rev. 1 5/6/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com