Omron E39-L103 Mounting bracket Datasheet

Mounting Brackets
E39-L/F39-L
Slits/Reflectors
E39-S/E39-R
CSM_E39-L_F39-L_E39-S_E39-R_DS_E_3_1
Mounting Brackets
Model
Fitting
materials
Accessories
Count
Description
Material
Count
E39-L2
Iron, zinc plating
1
Hexagonal bolts M4 × 12
(with spring and plain washers)
Iron, zinc plating
2
E39-L4
Iron, zinc plating
1
Slotted/Phillips screws M3 × 12
(with spring and plain washers)
Iron, zinc plating
2
Iron, zinc plating
1
Hexagonal bolts M4 × 20
(with spring and plain washers)
Iron, zinc plating
E39-L5
Nuts M4
Iron, zinc plating
2
2
Applicable sensor
(mounting pitch on
sensor side)
E3S-RS30E4@ (25.4)
E3S-R1E4@ (25.4)
E32-T16 (20)
E3L-DS50E4
E39-L6
Iron, zinc plating
1
Hexagonal bolts M4 × 12
(with spring and plain washers)
Iron, zinc plating
2
E3L-2RC4 (25.4)
E3S-RS30E4@ (25.4)
E3S-R1E4@ (25.4)
E39-L31
Iron, zinc plating
1
Slotted/Phillips screws, M3 × 12
(with spring washers)
Iron, zinc plating
2
E3C-S50 (8)
2
Iron, zinc plating
1
Phillips screws M4 × 25
(with spring and plain washers)
Iron, zinc plating
E39-L40
Nuts M4
Iron, zinc plating
2
Phillips screws M3 × 14
(with spring washers)
Plain washer M3
Iron, zinc plating
Iron, zinc plating
4
Phillips screws M3 × 10
(with spring washers)
Plain washer M3
Iron, zinc plating
4
Iron, zinc plating
4
Stainless steel (SUS304)
2
Stainless steel (SUS304)
2
E39-L41
Iron, zinc plating
E39-L42
Iron,
black coating
E39-L43
Stainless steel
(SUS304)
Stainless steel
(SUS304)
E39-L44
E39-L51
Iron, zinc plating
E39-L53
Iron, zinc plating
E39-L54V
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
E39-L69
E39-L70
E39-L83
Stainless steel
E39-L85
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
E39-L86
E39-L87
Note:
2
2
1
1
1
Slotted/Phillips screws M3 × 8
(with spring and plain washers)
Slotted/Phillips screws M3 × 8
(with spring and plain washers)
Slotted/Phillips screws M4 × 30
(with spring and plain washers)
Nuts M4
Iron, zinc plating
Iron, nickel plating
4
2
E3C-1 (10)
E3C-2 (20)
E3C-DS10 (19)
E3C-VS1G (19)
E3C-VS3R (19)
E3Z pre-wired model
(25.4)
E3Z pre-wired model
(25.4)
E3JM (40)
---
---
E3JM (40)
1
---
---
---
E32-T54V
1
1
1
1
1
--Hexagonal bolts M4 × 12
(with spring and plain washers)
Hexagonal bolts M4 × 12
(with spring and plain washers)
Hexagonal bolts M4 × 12
(with spring and plain washers)
Stainless steel (SUS304)
2
Stainless steel (SUS304)
2
---
6
2
---
Slotted/Phillips screws M3 × 12
(with spring and plain washers)
Slotted/Phillips screws M3 × 12
(with spring and plain washers)
5
E3JK
1
1
Page
Dimensions
---
E3S-R1@ (20)
E3S-R3@ (20)
E3S-R6@ (20)
E3S-R8@ (20)
E32-T24S
E32-A03
Iron, zinc plating
2
E3S-C (25.4)
Iron, zinc plating
2
E3S-C (25.4)
Iron, zinc plating
2
E3S-C (25.4)
E3S-CR62/67 (25.4)
6
Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
1
E39-L/F39-L/E39-S/E39-R
Fitting
materials
Model
Accessories
Count
E39-L93FH
Stainless steel
(SUS304)
1
E39-L93FV
Stainless steel
(SUS304)
1
E39-L93H
Stainless steel
(SUS304)
1
E39-L93V
Stainless steel
(SUS304)
1
E39-L93XY
E39-L94
---
Iron, zinc plating
---
2
Description
Material
Count
Holder (upper)
Holder (lower)
Pipe
Bolts M4 × 12 with Hexagonal
holes
Heat-resistant ABS resin
66 nylon
Stainless steel (SUS304)
Iron, nickel plating
1
1
1
2
Bolts M4 × 30 with hexagonal
holes
Iron, nickel plating
1
Phillips screws M3 × 12
(with spring and plain washers)
Spring washer M4
Plain washer M4
Nuts M4
Holder
Pipe
Stainless steel (SUS304)
2
Iron, nickel plating
Iron, nickel plating
Iron, nickel plating
66 nylon
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Iron, zinc plating
Iron, zinc plating
1
1
3
1
1
2
2
4
4
Bolts M5 × 16 with hexagonal holes
Nuts M5
Phillips screws M3 × 10
Nuts M3
Applicable sensor
(mounting pitch on
sensor side)
E3Z (25.4)
E3S-R1@/R3@
/R6@/R8@ (20)
E39-R1/E39-R3
Page
Dimensions
8
E3Z (25.4)
E3S-R1@/R3@
/R6@/R8@ (20)
E39-R1/E39-R3
E32-T16P (19)
E39-L96
* For installation Stainless steel
of Sensor
(SUS304)
Adjuster E39L93
Stainless steel
E39-L97
(SUS304)
E39-L98
Stainless steel
(SUS304)
E39-L102
Stainless steel
(SUS304)
Stainless steel
(SUS304)
E39-L103
E39-L104
Stainless steel
(SUS304)
E39-L109
Stainless steel
(SUS430)
Stainless steel
(SUS430)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
E39-L114
E39-L115
E39-L116
E39-L117
E39-L118
E39-L119
E39-L120
Phillips screws M3 × 6
(with spring and plain washers)
Iron, nickel plating
2
1
Slotted/Phillips screws M3 × 12
(with spring and plain washers)
Stainless steel (SUS304)
2
1
1
1
1
1
Slotted/Phillips screws M3 × 12
(with spring and plain washers)
Hexagonal bolts M4 × 12
(with spring and plain washers)
Hexagonal bolts M4 × 12
(with spring and plain washers)
Slotted/Phillips screws M3 × 8
(with spring and plain washers)
---
Stainless steel (SUS304)
2
Iron, zinc plating
2
Iron, zinc plating
2
Stainless steel (SUS304)
2
---
E39-R1
E3S-R1@/R3@ (20)
E3Z pre-wired model
(25.4)
E3S-R6@/R8@ (20)
E3S-C (horizontal type)
(25.4)
E3S-C (vertical type) (25.4)
E3S-CR62/67 (25.4)
E3Z pre-wired model
(25.4)
E32-R21 (for installation of
E39-R3) (25.4)
---
E32-S15-@ (13.2)
2
Phillips screws M5 × 10
Iron, zinc plating
4
E3MC (28)
1
Phillips screws M5 × 8
Slotted/Phillips screws M3 × 8
Iron, zinc plating
Iron, nickel plating
4
2
E3MC
1
---
---
---
E3T-S (9/15)
1
---
---
---
E3T-S (9/15)
1
---
---
---
E3T-S (9/15)
1
---
---
---
E3T-F (8)
1
---
---
---
E3T-F (8)
4
4
4
4
4
4
E3C-S10 (7.5)
10
11
E39-L127-T1
Iron, zinc plating
1
E39-L127-T2
Iron, zinc plating
1
E39-L127-T3
Iron, zinc plating
1
Note:
9
1
Phillips screws M2.3 × 8
Spring washer M2.3
Phillips screws M2.3 × 8
Spring washer M2.3
Phillips screws M2.3 × 8
Spring washer M2.3
Iron, zinc plating
Iron, zinc plating
Iron, zinc plating
Iron, zinc plating
Iron, zinc plating
Iron, zinc plating
Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
2
E39-L/F39-L/E39-S/E39-R
Accessories
Model
Fitting
materials
E39-L131
Stainless steel
(SUS304)
1
E39-L132
Stainless steel
(SUS304)
1
E39-L135
Stainless steel
(SUS304)
1
E39-L136
Stainless steel
(SUS304)
1
E39-L142
Stainless steel
(SUS304)
1
E39-L143
Stainless steel
(SUS304)
1
None
E39-L144
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Iron,
black coating
1
Slotted/Phillips screws M3 × 12
(with spring and plain washers)
1
None
1
None
E39-L148
E39-L149
Count
Description
Slotted/Phillips screws M4 × 25
Spring washer M4
Plain washer M4
Nuts M4
Slotted/Phillips screws M4 × 25
Spring washer M4
Plain washer M4
Nuts M4
Slotted/Phillips screws M4 × 35
Spring washer M4
Plain washer M4
Nuts M4
Slotted/Phillips screws M4 × 35
Spring washer M4
Plain washer M4
Nuts M4
Slotted/Phillips screws M3 × 8
(with spring and plain washers)
Stainless steel
(SUS304)
1
E39-L151
Stainless steel
(SUS304)
1
E39-L153
Stainless steel
(SUS304)
1
F39-L1
Iron, zinc plating
4
F39-L2
Iron, zinc plating
4
F39-L3
F39-L4
F39-L5
Iron, zinc plating
4
Iron, zinc plating
4
Iron, zinc plating
4
F39-L9
Stainless steel
(SUS304)
1
F39-L10
Iron
2
F39-L11
Iron
2
F39-L12
Iron
2
Note:
Count
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
Stainless steel (SUS304)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Stainless steel (SUS304)
2
---
Stainless steel (SUS304)
---
---
2
---
---
Holder/bracket
E39-L150
Material
Shaft (brace)
Bolt with hexagonal hole
Nut
Phillips screw
Slotted/Phillips screws
Holder/bracket
Shaft (brace)
Bolt with hexagonal hole
Nut
Phillips screw
Slotted/Phillips screws
Slotted/Phillips screws M3 × 8
(with spring and plain washers)
Phillips screws M4 × 20
Nuts M4
Phillips screws M4 × 25
Phillips screws M4 × 20
Nuts M4
Mounting Spacer
------Slotted/Phillips screws M3 × 25
Plain washer M3
Phillips screws M4 × 15
Nuts M4
Phillips screws M4 × 15
Nuts M4
Phillips screws M4 × 15
Nuts M4
Applicable sensor
(mounting pitch on
sensor side)
E3G-R1@ (25)
E3G-L7@ (25)
E3G-R1@ (25)
E3G-L7@ (25)
E3G-MR19 (T)
E3G-ML79 (T)
12
E3G-MR19 (T)
E3G-ML79 (T)
E3Z pre-wired model
(25.4)
E3X-DA-S/MDA
E3X-NA
E3C-LDA
E2C-EDA
E3Z pre-wired model
(25.4)
E3X-NA
E3Z-G
PBT (polybutylene terephthalate)
Stainless steel (SUS304)
Stainless steel (SUSXM7)
Stainless steel (SUS304)
Stainless steel (SUSXM7)
Stainless steel (SUS304)
PBT (polybutylene terephthalate)
Stainless steel (SUS304)
Stainless steel (SUSXM7)
Stainless steel (SUS304)
Stainless steel (SUSXM7)
Stainless steel (SUS304)
Stainless steel (SUSXM7)
Stainless steel (SUS304)
Brass, nickel-plated
Brass, nickel-plated
Brass, nickel-plated
Brass, nickel-plated
Brass, nickel-plated
Heat-resistant ABS resin
---
8
8
8
8
8
4
---
---
---
F3W-C
--2
2
4
4
4
4
4
4
F3W-C
--Iron, zinc plating
Iron, zinc plating
Iron
Iron
Iron
Iron
Iron
Iron
Page
Dimensions
1
1
1
1
1
2
E3Z (25.4)
E3S-R6@/R8@ (20)
E39-R3
1
1
1
1
1
2
2
13
E3Z (25.4)
E3S-R6@/R8@ (20)
E39-R3
E3Z pre-wired model
(25.4)
F3W-B
F3W-B
F3W-A
14
F3UV-A
F3W-D
15
F3W-D
Protective fittings
Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
3
E39-L/F39-L/E39-S/E39-R
Contact Mounting Plates
Model
Material
E39-L60
Note:
Count
Applicable type
1
E3S-R@6
PBT (polybutylene terephthalate)
Page
Dimensions
15
Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Slits
Model
Slit width
Installation procedure
E39-S39
Width 1 × 20 mm
Seal type
E39-S60
Width 0.5, 1 × 15 mm
Seal type
E39-S61
Width 0.5, 1, 2, 4 × 11 mm
Applicable type
E3JM-10@4 (T)
E3JK-5@@
E32-T16
E3S-CT@1
E39-S63
0.5-mm dia., 1 mm
E3T-ST1@
E39-S64
0.5-mm dia., 1 mm
E3T-FT1@
E39-S65A
0.5 mm dia.
E39-S65B
1-mm dia.
E39-S65C
2-mm dia.
Plug-in type
E39-S65D
Width 0.5 × 10 mm
E39-S65E
Width 1 × 10 mm
Width 2 × 10 mm
E39-S65F
Note:
E3Z-T@@
Applicable models that appear shaded come with the Slits at left as accessories
Reflectors
(Refer to Dimensions on page 16.)
Name
Item
Model
Non-fogging
reflective plate
Reflectors
E39-R1
E39-R1S
Directional angle
E39-R1K
E39-R2
30° min. *1
Special Reflector for E3ZM-B
Reflectors
E39-R6
E39-R10
30° min. *2
Ambient operating
temperature range
−25 to 55°C
Ambient storage
temperature range
−40 to 70°C
−40 to 60°C
−40 to 55°C
Ambient operating
humidity range
E39-RP1
30° min.
−40 to 70°C
35% to 85%
35% to 95%
Ambient storage
humidity range
35% to 85%
35% to 95%
Degree of protection
IEC IP67
Accessories
---
*1. 40° or higher for E3JM-R and E3JK-R.
*2. 40° or higher for E3G-R.
Name
Item
Model
Small reflector
E39-R9
Directional angle
E39-R3
Tape reflector
E39-R4
30° min.
2° to 20° min.
Ambient operating
temperature range
0 to 40°C
35% to 95%
35% to 85%
35% to 95%
35% to 85%
Degree of protection
IEC IP67
---
Mounting Brackets E39-L104
(with screws)
Name
Model
---
Phillips screws M3
× 3, spring washers M3, nuts M3
---
Laser Reflectors
Short-distance transparent object detection
Standard
Item
E39-RS3
E39-RS3-CA
30° min.
−40 to 70°C
Ambient storage
humidity range
Accessories
E39-RS2
E39-RS2-CA
−25 to 55°C
Ambient storage
temperature range
Ambient operating
humidity range
E39-R37-CA
E39-RS1
E39-RS1-CA
E39-R12
E39-R13
E39-R14
Ambient operating
temperature range
−10 to 55°C (No icing)
Ambient storage
temperature range
−25 to 70°C (No icing)
Ambient operating
humidity range
35 to 85% (No condensation)
Ambient storage
humidity range
35 to 85% (No condensation)
Sheets
E39-RS4
E39-RS5
4
E39-L/F39-L/E39-S/E39-R
(Unit: mm)
Mounting Bracket Dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-L2
E39-L4
Four, R1.6
4
5
3.2
20 33
4
3.2
Four,
1.2 R1.6
20
11
2.3
3.2
5.5
92.1
82.1
Material: Iron
20±0.2
10.2
58
20.2
Optical axis
Material: Iron
41 25.4
5
Two,
3.2 dia.
4.2
Two, M4
slotted,
hexagonal
bolts
4.2
5.6
2.1R
5
25
1.6
25.4
9
E39-L5
29.1
20
3
4.2
E39-L6
6
4.2
5
24
6.5
25.4
11
4.2
(2.1R)
34
24.2±0.2
1.6
12
20
5
Three, 4.4 dia.
4.9
5
5
4.2
25
6R
4.2
5
1.6
Material: Iron
(2.1R)
(R2.1)
45
4.2
70
4.2
Material: Iron
12
5
6.5
25.4
39
24°
20
8.6
15.8
E39-L31
E39-L40
Four, R1.6
3.2
R3.2
6 dia.
18±0.1
R3.2
17
10.5
12
6.4
4
Two, R5
6
6
Material: Iron
1
10.5
17
Material: Iron
6.4
9
3.9
3.2
4.2
42±0.1
7
50
Two, R5
2
5
40±0.1
3.2
16°
12
Two, 4.4 dia.
Two, R5
Two, R5.6 Two, R5
R3
8
22
10±0.1
3.2
3.9
4.2
Two, M3
6
R56.6±0.1
31.2
4.5 dia. max.
Pushing out height: 0.6 min.
60
R2.2
21.9
60°
45°
1
10°
R2.2
24
4.4
58
5
E39-L/F39-L/E39-S/E39-R
E39-L41
E39-L42
R1.6
5.5
7
5
3.2
R1.6
3.2
11
6.5
8
13.5
1
R1.6
23
27
3.2
1
Material: Iron
11.5
10
10±0.1
4.5
15.5
3.2
R1.6
3.2
Material: Iron
17.5
R3
3.2
4.5
5
3.2
12
3.2
17
15.5
21
2-M3
6
4.5 dia. max.
Pushing out height: 0.6 min.
1
E39-L43
E39-L44
30
3.5
3.5
R2
7
16.2
8.7
23.2
3.5
1.2
Four, 3.2 dia.
25.4
R3.5
1.2
40
9
18
3.2
6
±0.1
14
R20
13
R1
6
3.4
5
3.4
E39-L51
36
20°
3.4 15
R2
Material: Stainless
steel (SUS304)
3.2 dia.
R25.4±0
Material: Stainless
steel (SUS304)
20°
7.5
.1
6
R2
31.2
R1
R1
E39-L53
6.5
35.5
Two, 3 dia.
20
R3.2
12
E3A2
12.4
22
E3A-M
E3A3
45
6.4
OA-5, OA-5N
6 dia.
R3.2
12.4
6.4
18
6
39.5
Material: Iron
37.5
35
1.6
4.5 dia.
4.5
R2.25
Material: Iron
13.5
E3A2, OA-5N
6.5
29.5
20
E3A-M, OA-5
70
E3A3
40±0.2
5
54.5
58
E39-L54V
E39-L69
3.2
5
4.5
20±0.2
3.110.7
16.5
8
7.2
4.1
Material: Stainless steel (SUS304)
4
23
1.2
15
7.2
3.1
3.2
3.1
7.2
7.2
3.1 10.7
Material: Stainless steel (SUS304)
0.5
4.1
5
16.5
20±0.2
30
6
E39-L/F39-L/E39-S/E39-R
E39-L70
E39-L83
20±0.2
16.3
16.3
20±0.2
0.4
3.1 10.7
7.2
3.2
3.1
2.05
4.3
Two, R1.6
3.1
7.2
1.8
16.5
3.5
Material: Stainless steel (SUS304)
Six, R1.2
11
17.6
7.2
R1.6
2.05
3.1
1.2
Material: Stainless steel
2.05
31.7±0.1
11.4
3.1
7.2
7.2
3.2
10
2.8
16.5
10.7
41.7
E39-L85
9.8
E39-L86
15.6
4.2
20
2.6
37
32 (44.7)
4.2
15
8
32.2
9.2 4.2
39
4.2
8
9.2
12.9
Material: Stainless steel (SUS304)
4.2
2.6
16
31
43.8
Material: Stainless steel (SUS304)
4.2
12.9
31
43.8
31
1.5
19
12.9
4.2
9.2
4.2
12
20
28.9 32.2
15.1
1.5
E39-L87
10
9.2
4.2
25.4 41
4.2
4.2
10
25
12.4
1.5
6.2
4.1
8.2
7.2
25.4
Material:
Stainless steel (SUS304)
4.2
75.6
43.7
2.6
15
7
E39-L/F39-L/E39-S/E39-R
E39-L93FH
E39-L93FV
26.3
26.3
20.9
20.9
48
8
E3Z
8
48
E3Z
15°
15°
15°
15°
12 dia.
12 dia.
208
215
188
183
181
176
59
54
30
53
48
6
24
12
Two, 6.6 dia.
35
50
35
Two, 6.6 dia.
50
53
45
26
29
22.5
48
E39-L93H
E39-L93V
26.3
26.3
20.9
8
48
20.9
E3Z
8
48
E3Z
15°
15°
15°
12 dia.
12 dia.
216
15°
208
189
184
181
176
59
54
49
44
30
20
10
8
32
34
27
Two, 6.6 dia.
46
Two, 6.6 dia.
15
10
48
24
8
14
32
45
8
E39-L/F39-L/E39-S/E39-R
E39-L94
E39-L93XY
4
Four, R1.6
197
4.8
3.2
165
8
20+0.20
35
22
4
23
38
Pipe (B)
3.2
15
20
1.2
20.9 26.3
3.2
Two, R1.6
2.3
5.8
E3Z
Holder (A)
40
19 ±0.2
170
52
15° 15°
8
Material: Iron
12 dia.
11
3.2 dia.
24
48
E39-L96
213
189
60
Center of
pole brace
E39-R1 9.5
reflector
29.5
12 dia.
E39-L96
27
34.5
15.5
Note: The E39-L93XY consists of only the one joint holder
(A) and pipe, and the two hexagonal bolts and nuts. It
cannot be mounted to the Sensor alone.
E39-L97
E39-L98
Mounting Holes
Mounting Holes
Two, M6
30°
30°
Stainless steel
(SUS 304)
30°
Two, M6
30°
Two, R28
44±0.2
44±0.2
56 dia.
56 dia.
Stainless steel
(SUS 304)
Four, R3.3
Four, R3.3
E3S-R
34
2.6
26
20
2
An attached
screw
61
15
6.5
(For E3S-B)
(For E3S-R)
20
20
50
25.4
20
25
16
(A)*
2
56
(E3S-R)
16
48
38.5
3
Two, R22
4
(For E3Z)
An attached
screw
56
8.2
13.5 16
20
16
E3S-R
Two, R22
* Mounting Bracket can be attached to side (A)
8
24
34
9
E39-L/F39-L/E39-S/E39-R
E39-L102
E39-L103
25.4±0.1
31±0.1
4.2 12
4.2
4.2
4.2
1.5
8.3
4.2
Material:
Stainless steel (SUS304)
9.2
8.3
6.2
6.2
1.5
12
20
9.2
9.2
4.2
17.3
9.3
25.4±0.1
20
12.9
12.9
4.2
9.2
Material:
Stainless steel (SUS304)
20
12
4.2
31±0.1
43.8
38.2
E39-L104
E39-L109
R1.7
Mounting Holes
R1.7 3.4
5.8
14°
Two, M3
12.5 (13.7)
10.6
5.4
R20
R1
36
4.5
6
3.4
29
3.4
6
3.2
R3.5
Two, 3.2 dia.
16
4636
R25.4
(39) 37.8
8.2
12
Material:
Stainless steel
(SUS430)
3.5
Material:
Stainless steel
(SUS304)
8.2
3.4
(14.7)
6
26
3.2
32.6
45.8
8.8
R1.6
R1
10°
E39-L114
E39-L115
6.8
6.8
Two,
M3
22
5.2
11
8.4
5.2
Four, 5.5 dia.
28
33.2
21 35
37 26
Six, R2.6
15°
15°
100
5.2
33
70
Material:
Stainless steel (SUS430)
R1
28
58
7
10
R28
R28
54
5
15
11.5
3
Material: Stainless steel (SUS304)
42
50
10
E39-L/F39-L/E39-S/E39-R
E39-L116
E39-L117
Nut Plate
Nut Plate
(Four, R2)
(Four, R2)
(Two, R1.7)
3
3
Three,
M2
9
Three,
M2
(17.8) 7.5
15 20.5
1.6
5
7
(Two, R2)
4
(Two, R1.7)
11.2
2.2
11
1.2
(Two, R2)
Two, R2
3.1
9.5
2.4
4
(Two, R1.1)
11.5 18 (23) 15
9
9
90°
(Two, R1.2)
2.4
1.2
R1.5 max.
E39-L118
R1
max.
90°
(Two, R2)
7
Material:
Stainless steel (SUS304)
1.2-mm-thick
15 20.5
Two, 3.4
4.1
31.2
9
Material:
Stainless steel (SUS304)
3.4
1.2-mm-thick
3.1
10
Two, 2.2
5
(Two, R1.7)
5
10
(11.2)
4.5
(Two, R1.1)
E39-L119
Nut Plate
1.2
(Four, R2)
11.5
3
Three,
M2
90°
10.5
90°
11.5
9
1.2
90°
15 20.5
15
22.7
5
7
2.4
Four, M2 Tap processing
8
4.5
3.1
16 12
4
8
9
9
11.5 18 (23)
15
Two, 2.2
(Two, R1.1)
5
3.1
3.4 (Four, R2)
E39-L120
Material:
Stainless steel (SUS304)
1.2-mm-thick
E39-L127-T1
E39-L127-T2
E39-L127-T3
4.2
2.4
7
9
Material:
Stainless steel (SUS304)
1.2-mm-thick
3.2
2.4
(Two, R1.7)
20
Four, 3.2 dia.
(Mounting
bracket holes)
(5.4)
4
10
14
1.2
22.5
A
12
5.6
1.6
5.6
Four, M2.3
(Mounting sensor
screws)
Four, M2 Tap processing
8
2.3
3.2
7.5
2.4
15
30
16
12
8
9
2.4
6
Material: Stainless steel (SUS304)
1.2-mm-thick
13.5
Two, 5 dia.
Material: Iron
20
A+24
Model
Dimension A (mm)
E39-L127-T1
10
E39-L127-T2
20
E39-L127-T3
30
11
E39-L/F39-L/E39-S/E39-R
E39-L131
E39-L132
6.4
22
Two, R3.2
5.5
90°±1°
1.5
11.5
23.5
15°
6.4
23.5
11.5
2-R3.2
R34
35
25±0.1
1.5
6.4
Four, R1
Two, R3.2
Two, R2.2
5.5
R25
4.2
25±0.1
25±0.1
65.5
Four, R2.1
Two,
4.2 dia.
Material:
Stainless steel (SUS304)
4.4
45
R34
6.4
4.2 dia.
Two, R3.2
35.5
8.5
10
22
R25
4.2
23.5
11.5
15°
23.5
90°±1°
8.5
Material: Stainless steel (SUS304)
45
E39-L135
6.4
E39-L136
Two, R3.2
90
6.4
15
2
28
18°
90°±1
R44
32
2°
5°
48
37±0.1
2
Two, R3.2
7
88
83
74
72
Two, 4.2 dia.
28
15
6.4
Two,
R3.2
5.5
Eight, 4.2
37
20.5
74±0.1
5°
2-4.2
118 123
32
Two,
R3.2
85 74
R82.7
Four, R2.1
Material:
Stainless steel (SUS304)
10°
R82.8
6.4
54.62
R82.7
R44
5°
90°±1°
R82.7
18°
2°
5°
Material: Stainless steel (SUS304)
58
E39-L142
Fourteen,
R2.1
E39-L143
14
8.7
22
14
15.8
7
Four, 3.4-dia. holes
(10.3)
34.8
22
16
2.5
3
25.4
37
5.3
55
R12
Material: Stainless steel (SUS304)
26.8
Two, 3.2 dia.
4.5 15.3
14°
1.5
7.3
3
7
4.5
16
3
4
4.5
Four, R1.7
3.4
10.3 10 max. 7
12 5
7
1
3.4
7.8
1
Material: Stainless steel (SUS304)
12
E39-L/F39-L/E39-S/E39-R
E39-L144
E39-L148
25
Two, R17
16
R1.7
Two, 50°
21
R1.7
23
3.4
12 12 max. 9
Four, R1.6
2
2
3.4
14.2
3.5
Four, R1.6
22
16
9.5
25.4
38.5
Two, 3.2 dia.
7.3
Two, R25.4
4.3
3
1.5
7.3
27
35
4
5°
Material: Stainless steel (SUS304)
1.5
9.1
3
Material: Stainless steel (SUS304)
E39-L149
E39-L150
E39-L151
20
14
5.5
52
13.6
4.5 Two, 3.5
45
Four, 4.5 dia.
Polybutylene
terephthalate
5.4
35
42.5
Four, R3
24
19
22.7
40.5
6.8
Two, 3.5 dia.
10 dia.
5.5
Stainless steel
(SUS 304)
10.5
L
8
Two, 6.5 dia.
4.5
1
21
Polybutylene
terephthalate
32
34
19
46
Length (mm)
E39-L153
F39-L1
Model
L
E39-L150
65
E39-L151
165
2
14
8
3.5
7
Four, 4.6-dia. holes
7
4
3.5
Two, R1.75
Material: Iron
4-3
Eight, R1.75
4
20
Four, R2.3
10
4.6
10
6
18
40
6 6
22
4.6
Four, 3.5
25.4
41
10
1.2
22
13
E39-L/F39-L/E39-S/E39-R
F39-L3
F39-L2
Four, R2.8
8
2
1.6
Two, 4.6-dia. holes
Material: Iron
37
18
30
18
10
13
20
15
28.5
Material: Iron
10 10
6
6
Minimum
R
16.5 11
R5
Three,
3.2 dia.
holes
22
29
30
20
Four, R2.3
1.6
6.4
5
6
12.5
30
4.6
Two, R2
5.6
5.6
45
15
75
F39-L4
C Type (Receiver, Top)
F39-L4
D Type (Receiver, Bottom)
65
15
22
1.6
Two, 9 dia.
65
30
19
30
10
Material: Iron
10
10
15
25
1.6
30
30
55
1.6
Two, 9 dia.
F39-L5
B Type (Emitter, Bottom)
14.5
9
17
23
17
14.5
22
34.5
9.7
20.9 34.5
Two,
3.2 dia.
1.6
22.4
34.5
D Type (Receiver, Bottom)
2 dia.
14.5
9
9
17.2 dia.
14.5
16
1.6
23
16
14.5
14.5
17
Two, 6 dia.
Two, 6 dia.
23
17
6.5 dia.
F39-L5
2 dia.
16
17.2 dia.
8.1
14.5
Two, 6 dia.
Two, 6 dia.
Two, 6 dia.
16
Material: Iron
14.5
17
6.6
14.5
14.5
1.6
F39-L5
C Type (Receiver, Top)
14.5
23
17
16
Two, 6 dia.
2 dia.
16
34.5 22
Material: Iron
17.2 dia.
65
9
17
16
23
Two, 6.5 dia.
15
14.5
23
23
14.5
Material: Iron
Two, 3.2 dia.
15
2 dia.
Two, 6 dia.
20.9
22.4
30
F39-L5
A Type (Emitter, Top)
1.6
Two, 9 dia.
Four, 3.2 dia.
Two, 9 dia.
25
5.3
9.7
30
19
27.5
Material: Iron
30
10
55
22
30
22 34.5
14.5
23
17
6.6
8.1
Material: Iron
9.7
14.5
22
34.5
6.5 dia.
14.5
16
34.5 20.9
22.4
34.5
1.6
Two, 3.2 dia.
Two, 6 dia.
14
E39-L/F39-L/E39-S/E39-R
F39-L10 (L-shaped)
F39-L9
Two, R1.55
Two, R1.55
30
10.7
7.2
3.1
R1.55
3.2
7.2 3.1
20±0.2
5
Two, R1.55
16.5
5
30
20±0.2
3.1
110 130
140 130 114
1.2
3.1
7.2
10.7
7.2 Two, R1.55
3.2
16.5
Four,
mounting
holes
90°±1
R1.55
Material: Stainless steel (SUS304-CP)
4.8
10.8
Material: iron (t = 2 mm)
* mounting screws
included
F39-L11 (Flat)
18
18
42
Four, 4.8 dia.
13
22
2
F39-L12 (Receiver)
75
Material: iron (t = 2 mm)
* mounting screws included
45
30
Note: The Receiver sees a mirror-image of the Emitter.
Five, 10 dia. 10.6
8.1
14
140 130 114
Four, mounting
holes
80 100
45
4.8
144 130 100
6
40.5
77.5
Material: iron (t = 2 mm)
* mounting screws included
6
7.6
10.8
Four, 4.8 dia.
6
18
21
47
13
15
20
14
2
7
7
12.7
4.5
15.75
18
Two, 9.5 dia.
8.1
8.6
14.2
1.6
35.2
(Unit: mm)
Contact Mounting Plate
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-L60
6.5
(33)
20
6.5
11.75
2.5
11.75
5
3.4 dia.
2.5
3.4 dia.
Material: PBT (polybutylene terephthalate)
5
15
E39-L/F39-L/E39-S/E39-R
(Unit: mm)
Reflector dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-R1
E39-R1S
E39-R1K *
E39-R2
E39-R9
30.9 × 30.9
42.3
(21)
8
4
Material,
reflective surface: acrylic
Rear surface: ABS
Two, 3.5 dia.
40.3
34
7
Material,
reflective surface: acrylic
Rear surface: ABS
7.5
80.8
74.5
Four, 3.5 dia.
7
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R10
7.5
7
15
25
35.4
3.5
5.5
Two,
3.6 dia.
8
47 × 47
8
59.9 52
61.4
59.9 52
(30.4)
8
10
5
2.7
1.6
* E39-R1K only
Coating on reflective surface
E39-R3
2.7
7
6.5
1.6
Material,
reflective surface: acrylic
Rear surface: ABS
34
E39-R4
30
40
51.6
3.5
5.5
Two,
4 dia.
8
E39-R6
13.7
4
4.9
2
23
9.7
19
Material,
reflective surface: acrylic
Rear surface: ABS
4
Material,
reflective surface: acrylic
Rear surface: ABS
6
4.5
3.4
29
3.4
R20
7
14° 13.7
18.45
22.9
20
0.2
Material,
reflective surface: acrylic
Rear surface: ABS
16
Two, 2.2 dia.
40
34
0.2
Mounting bracket
Two,
M3
13.7 Eight, R1
10.1
3.2
60 52 40
18.3 23
34
1.2
2.6
(1.1)
Two, 3.2 dia.
R25.4
34.8 38
1.2 10°
Stainless
steel
(SUS304)
4.8
Reflector
13.7
8.7
23 18.3 10.2
41.8 25.4
1.4
E39-R37-CA
11 Adhesive tape side
22.5
19.3
2
Two, 3.1 dia.
Reflector: t0.5
Two, R1.55
(adhesive tape side)
Mounting
Bracket: t 0.5
Material:
Mounting plate: stainless steel (SUS301)
Reflective surface: acrylic
3.5
3.5
Note: The reflective plate and mounting plate (1) come as a set.
Retroreflector for E3ZM-B
E39-RP1
8.5
44
3
0.2
80
72 63.6
Reflector
Two, 3.5 dia.
16
E39-L/F39-L/E39-S/E39-R
E39-RS1
E39-RS1-CA
E39-RS3
E39-RS3-CA
35
0.5
10
80
Material: Acrylics
0.5
Adhesive
tape side
Four, R1
E39-RS2
E39-RS2-CA
70
40
0.5
35
Material: Acrylics
Material: Acrylics
Four, R1
Adhesive
tape side
Adhesive
tape side
Four, R1
E39-R13
E39-R12/R14
5.5
4
ur,
R1
23
.4
1.6
R3
.7
,R
1
4
a
di
o,
Tw
3.
12
di
17.2
.2
R3
o,
ur
7
a.
23
.
4
3.
Fo
6
30
R3
.2
15
7
Fo
ur
,R
2
R3
Fo
2.9
24
Fo
ur
,
45
Tw
.7
R3
37
E39-RS4
E39-RS5
0.4
0.4
108
195
46
22
Adhesive
tape side
(Unit: mm)
Sensitivity Adjuster
E39-G1
Adhesive
tape side
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
4
9.3 dia.13 dia.
Material: Polycarbonate
(Unit: mm)
Sensitivity Adjustment Driver
E39-G2
8 dia.
0.8
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
1
(12.6)
7 dia.
Material: Polycarbonate
17
E39-L/F39-L/E39-S/E39-R
(Unit: mm)
Protective Cover
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-G9
10
32.2
46.1
6
5
5.5
Material: Polycarbonate
0.9
1
10
1
(Unit: mm)
Lens Unit
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-F1V
0.5-dia. hole
8.9
4 dia.
6
M2.6 × 0.45
Effective depth: 3.8
Countersunk with straight edge,
depth: 0.9
(Unit: mm)
Connection Sockets
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Front Connection Socket
Eleven, M3.5 × 7
Sems screw
22
PF113A
Terminal arrangement/Internal connections (top view)
4
7
2
Two, M4 or 4.5 dia.
9
3
35.4
52 max.
Mounting Holes
1 11 10
34±0.2
4
34
43 max.
4
3.5
2
5
Two, 4.2 × 5 mounting holes
3.4
Eight, M3 × 8
Sems screw
6
6
7
8
31 max.
Front Connection Socket
PYF08A
Note: Rail mounting also possible.
4
5
Terminal arrangement/Internal connections (top view)
4
Mounting Holes
1
5
8
59±0.3
35.4
72 max.
Two, M3 or M4
or 4.5 dia.
12
14
4
9
13
15±0.2
6
23 max.
Note: Rail mounting also possible.
16.5
30 max.
Front Connection Socket
PY08
Terminal arrangement/Internal
connections (bottom view)
PCB Cutout Dimensions
Mounting Holes
13.2
Eight, 3 × 1.2 ellipse hole
4.1
1
25.5 max.
29.5 max.
2.7
7.7
20 max.
2.6
4
5
8
9
12
13
14
5.8
25.8±0.2
6.35
12.65
6.4
21.4+0.2
0
4.2
Eight, 1.3 dia. holes
24 max.
18
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2008.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Right Reserved.