Aluminum Electrolytic Capacitors/ FT Surface Mount Type Series: FT Type: V High temperature Lead-Free reflow(suffix:A✽) ■ Features ● Endurance: 2000 h at 105 °C ● Miniaturized, Low ESR (1 size smaller than series FK) ● RoHS directive compliant ■ Specifications Category Temp. Range –55 °C to +105 °C Rated W.V.Range 6.3 V.DC to 50 V.DC Nominal Cap.Range 10 μF to 2200 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes DC Leakage Current Please see the attached High temperature lead-free reflow products list. tan d After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Endurance Capacitance change ±30 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Resistance to Soldering Heat ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Cap (μF) 120 1k 10 k 100 k to 10 to 470 0.65 0.85 0.95 1.00 560 to 2200 0.70 0.90 0.95 1.00 ■ Dimensions in mm (not to scale) + L Series identification K A±0.2 B±0.2 Capacitance (μF) & '5 H 0D±0.5 Negative polarity marking (–) – (I) 0.3 max. (P) Example:25 V 22 μF Marking color : BLACK (Unit : mm) (I) ■ Marking W Pressure Relief (010 and larger) ( ) Reference size Rated voltage Mark Size code Lot number Rated Voltage Mark j 6.3 V A 10 V C 16 V E V H 25 V 35 V 50 V D L A, B H I W P K + 0.15 - 0.20 B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +- 0.15 0.20 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 0.15 0.20 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 0.15 0.20 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 – EEE-45 – Oct. 2013 Aluminum Electrolytic Capacitors/ FT ■ High temperature Lead-Free reflow Products Case size W.V. (V) 6.3 10 16 25 35 Cap. (±20 %) (μF) 100 220 330 470 680 1500 2200 68 150 220 330 470 1000 1500 47 68 100 150 220 330 680 1000 22 33 47 68 100 150 220 470 820 22 33 47 68 100 150 330 560 10 50 22 47 100 220 330 Dia. Length (mm) 4 5 6.3 6.3 6.3 8 10 4 5 6.3 6.3 6.3 8 10 4 5 5 6.3 6.3 6.3 8 10 4 4 5 5 6.3 6.3 6.3 8 10 4 5 5 6.3 6.3 6.3 8 10 4 5 5 6.3 6.3 8 10 (mm) 5.8 5.8 5.8 7.7 7.7 10.2 10.2 5.8 5.8 5.8 7.7 7.7 10.2 10.2 5.8 5.8 5.8 5.8 5.8 7.7 10.2 10.2 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 5.8 5.8 5.8 5.8 5.8 7.7 10.2 10.2 5.8 5.8 5.8 5.8 7.7 10.2 10.2 Endurance : 105 °C 2000 h Min. Packaging Q'ty Specification ✽Size Code B C D D8 D8 F G B C D D8 D8 F G B C C D D D8 F G B B C C D D8 D8 F G B C C D D D8 F G (B) C C D D8 F G Ripple ESR tan d Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 160 0.85 0.26 EEEFT0J101AR 240 0.36 0.26 EEEFT0J221AR 300 0.26 0.26 EEEFT0J331AP 600 0.16 0.26 EEEFTJ471XAP 600 0.16 0.26 EEEFTJ681XAP 850 0.08 0.26 EEEFT0J152AP 1190 0.06 0.28 EEEFT0J222AP 160 0.85 0.19 EEEFT1A680AR 240 0.36 0.19 EEEFT1A151AR 300 0.26 0.19 EEEFT1A221AP 600 0.16 0.19 EEEFTA331XAP 600 0.16 0.19 EEEFTA471XAP 850 0.08 0.19 EEEFT1A102AP 1190 0.06 0.19 EEEFT1A152AP 160 0.85 0.16 EEEFT1C470AR 240 0.36 0.16 EEEFT1C680AR 240 0.36 0.16 EEEFT1C101AR 300 0.26 0.16 EEEFT1C151AP 300 0.26 0.16 EEEFT1C221AP 600 0.16 0.16 EEEFTC331XAP 850 0.08 0.16 EEEFT1C681AP 1190 0.06 0.16 EEEFT1C102AP 160 0.85 0.14 EEEFT1E220AR 160 0.85 0.14 EEEFT1E330AR 240 0.36 0.14 EEEFT1E470AR 240 0.36 0.14 EEEFT1E680AR 300 0.26 0.14 EEEFT1E101AP 600 0.16 0.14 EEEFTE151XAP 600 0.16 0.14 EEEFTE221XAP 850 0.08 0.14 EEEFT1E471AP 1190 0.06 0.14 EEEFT1E821AP 160 0.85 0.12 EEEFT1V220AR 240 0.36 0.12 EEEFT1V330AR 240 0.36 0.12 EEEFT1V470AR 300 0.26 0.12 EEEFT1V680AP 300 0.26 0.12 EEEFT1V101AP 600 0.16 0.12 EEEFTV151XAP 850 0.08 0.12 EEEFT1V331AP 1190 0.06 0.12 EEEFT1V561AP 85 2.30 0.10 EEEFTH100UAR 165 0.88 0.10 EEEFT1H100AR 165 0.88 0.10 EEEFT1H220AR 195 0.68 0.10 EEEFT1H470AP 350 0.34 0.10 EEEFTH101XAP 670 0.18 0.10 EEEFT1H221AP 900 0.12 0.10 EEEFT1H331AP Reflow (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (6) (6) Taping (pcs) 2000 1000 1000 900 900 500 500 2000 1000 1000 900 900 500 500 2000 1000 1000 1000 1000 900 500 500 2000 2000 1000 1000 1000 900 900 500 500 2000 1000 1000 1000 1000 900 500 500 2000 1000 1000 1000 900 500 500 ✽ Size code( ):Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J→J, 1A→A, 1C→C, 1E→E, 1V→V, 1H→H · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 – EEE-46 – Oct. 2013