Data Sheet: F-2V4A We offer both off the shelf and custom solutions for video transmission over fiber. Our fiber optics video converters are ideal for multiplexing up to 32 composite video channels and 64 audio channels over fiber. We also offer bi-directional transport of signals in both directions over a single fiber. The F-2V4A is a video multiplexer and video to fiber system that carries 2 channel of composite video and 4 channels of audio over a single fiber. The video and audio signals are transported by 10 bit digital transmission techniques which eliminates signal degradation. Our units work with standard singlemode or multimode optical fiber with fiber optic transmission distances of up to 120 km when used with singlemode fiber. Video/Audio In PN: F-2V4A-T Up to 120 Km Singlemode Fiber Typical F-2V4A Application PN: F-2V4A-R Video/Audio Out Technical Specifications Standards: Channels: Video Bandwidth SNR/dP/dG Video Input Audio Optical Wavelength Tx Output Power Rx Sensitivity Saturation NTSC, PAL, SECAM 2 Baseband Video & 4 Audio 10Hz – 6.5MHz 67 dB < 1 deg / < 0.5% 1 Vp-p 75 ohm Terminal Block, 600 ohm 1310nm – 40 Km 1550nm – 80Km CWDM, DWDM - 80Km, 120Km -5 dBm -30 dBm No © 2013 Thor Broadcast – All rights reserved. Operating Temp: Storage Temp: Operating Humidity: Storage Humidity: Power Requirements: Dimensions: Contact: [email protected] 1-800-521-8467 0 – 50 (°C) -20 – 70 (°C) 0 – 90 (%) 0 – 90 (%) 110/240V Auto Sense 480mmX225mmX44mm